[PATCH v4 0/6] Change snvs rtc and poweroff to use syscon add pwrkey driver

[Frank.Li at freescale.com]

From: Frank Li <Frank.Li at freescale.com>

Change from v3 to v4
 - fix align
 - change to pr_warn

Change from v2 to v3
 - Keep snvs rtc compatiblity with old dts file
 - use general syscon-poweroff instead of modifying snvs-poweroff.c

Change from v1 to v2
 - Change simple-bus to simple-mfd
 - RTC remove lock.
 - RTC remove comments "These register offsets are relative to LP (Low Power) range"
 - power off, remove extra space

Frank Li (5):
  rtc: arm: imx: snvs: change use syscon to access register
  Document: dt: fsl: snvs: change support syscon
  arm: dts: imx: update snvs to use syscon access register
  document: devicetree: input: imx: i.mx snvs power device tree bindings
  arm: dts: imx6sx: enable snvs power key

Robin Gong (1):
  input: keyboard: imx: add snvs power key driver

 .../devicetree/bindings/crypto/fsl-sec4.txt        |  70 +++++--
 .../devicetree/bindings/input/snvs-pwrkey.txt      |   1 +
 arch/arm/boot/dts/imx6qdl.dtsi                     |  19 +-
 arch/arm/boot/dts/imx6sl.dtsi                      |  19 +-
 arch/arm/boot/dts/imx6sx.dtsi                      |  24 ++-
 arch/arm/boot/dts/vfxxx.dtsi                       |   9 +-
 drivers/input/keyboard/Kconfig                     |  11 +
 drivers/input/keyboard/Makefile                    |   1 +
 drivers/input/keyboard/snvs_pwrkey.c               | 232 +++++++++++++++++++++
 drivers/rtc/rtc-snvs.c                             | 136 ++++++------
 10 files changed, 408 insertions(+), 114 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/input/snvs-pwrkey.txt
 create mode 100644 drivers/input/keyboard/snvs_pwrkey.c

-- 
1.9.1