[PATCH v4 2/7] mmc: mediatek: Add Mediatek MMC driver
Chaotian Jing
chaotian.jing at mediatek.com
Fri May 22 01:40:00 PDT 2015
Dear Ulf,
Thanks!
please see my comment:
On Tue, 2015-05-19 at 12:27 +0200, Ulf Hansson wrote:
> On 19 May 2015 at 08:36, Chaotian Jing <chaotian.jing at mediatek.com> wrote:
> > Add Mediatek MMC driver code
> > Support eMMC/SD/SDIO
> >
> > Signed-off-by: Chaotian Jing <chaotian.jing at mediatek.com>
> > ---
> > drivers/mmc/host/Kconfig | 8 +
> > drivers/mmc/host/Makefile | 1 +
> > drivers/mmc/host/mtk-sd.c | 1422 +++++++++++++++++++++++++++++++++++++++++++++
> > 3 files changed, 1431 insertions(+)
> > create mode 100644 drivers/mmc/host/mtk-sd.c
> >
> > diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig
> > index b1f837e..6c3dbb9 100644
> > --- a/drivers/mmc/host/Kconfig
> > +++ b/drivers/mmc/host/Kconfig
> > @@ -775,3 +775,11 @@ config MMC_TOSHIBA_PCI
> > tristate "Toshiba Type A SD/MMC Card Interface Driver"
> > depends on PCI
> > help
> > +
> > +config MMC_MTK
> > + tristate "MediaTek SD/MMC Card Interface support"
> > + help
> > + This selects the MediaTek(R) Secure digital and Multimedia card Interface.
> > + If you have a machine with a integrated SD/MMC card reader, say Y or M here.
> > + This is needed if support for any SD/SDIO/MMC devices is required.
> > + If unsure, say N.
> > diff --git a/drivers/mmc/host/Makefile b/drivers/mmc/host/Makefile
> > index e3ab5b9..7473b79 100644
> > --- a/drivers/mmc/host/Makefile
> > +++ b/drivers/mmc/host/Makefile
> > @@ -20,6 +20,7 @@ obj-$(CONFIG_MMC_SDHCI_F_SDH30) += sdhci_f_sdh30.o
> > obj-$(CONFIG_MMC_SDHCI_SPEAR) += sdhci-spear.o
> > obj-$(CONFIG_MMC_WBSD) += wbsd.o
> > obj-$(CONFIG_MMC_AU1X) += au1xmmc.o
> > +obj-$(CONFIG_MMC_MTK) += mtk-sd.o
> > obj-$(CONFIG_MMC_OMAP) += omap.o
> > obj-$(CONFIG_MMC_OMAP_HS) += omap_hsmmc.o
> > obj-$(CONFIG_MMC_ATMELMCI) += atmel-mci.o
> > diff --git a/drivers/mmc/host/mtk-sd.c b/drivers/mmc/host/mtk-sd.c
> > new file mode 100644
> > index 0000000..26e9590
> > --- /dev/null
> > +++ b/drivers/mmc/host/mtk-sd.c
> > @@ -0,0 +1,1422 @@
> > +/*
> > + * Copyright (c) 2014-2015 MediaTek Inc.
> > + * Author: Chaotian.Jing <chaotian.jing at mediatek.com>
> > + *
> > + * This program is free software; you can redistribute it and/or modify
> > + * it under the terms of the GNU General Public License version 2 as
> > + * published by the Free Software Foundation.
> > + *
> > + * This program is distributed in the hope that it will be useful,
> > + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> > + * GNU General Public License for more details.
> > + */
> > +
> > +#include <linux/clk.h>
> > +#include <linux/delay.h>
> > +#include <linux/dma-mapping.h>
> > +#include <linux/ioport.h>
> > +#include <linux/irq.h>
> > +#include <linux/of_address.h>
> > +#include <linux/of_irq.h>
> > +#include <linux/of_gpio.h>
> > +#include <linux/pinctrl/consumer.h>
> > +#include <linux/platform_device.h>
> > +#include <linux/regulator/consumer.h>
> > +#include <linux/spinlock.h>
> > +
> > +#include <linux/mmc/card.h>
> > +#include <linux/mmc/core.h>
> > +#include <linux/mmc/host.h>
> > +#include <linux/mmc/mmc.h>
> > +#include <linux/mmc/sd.h>
> > +#include <linux/mmc/sdio.h>
> > +
> > +#define MAX_BD_NUM 1024
> > +
> > +/*--------------------------------------------------------------------------*/
> > +/* Common Definition */
> > +/*--------------------------------------------------------------------------*/
> > +#define MSDC_BUS_1BITS 0x0
> > +#define MSDC_BUS_4BITS 0x1
> > +#define MSDC_BUS_8BITS 0x2
> > +
> > +#define MSDC_BURST_64B 0x6
> > +
> > +/*--------------------------------------------------------------------------*/
> > +/* Register Offset */
> > +/*--------------------------------------------------------------------------*/
> > +#define MSDC_CFG 0x0
> > +#define MSDC_IOCON 0x04
> > +#define MSDC_PS 0x08
> > +#define MSDC_INT 0x0c
> > +#define MSDC_INTEN 0x10
> > +#define MSDC_FIFOCS 0x14
> > +#define SDC_CFG 0x30
> > +#define SDC_CMD 0x34
> > +#define SDC_ARG 0x38
> > +#define SDC_STS 0x3c
> > +#define SDC_RESP0 0x40
> > +#define SDC_RESP1 0x44
> > +#define SDC_RESP2 0x48
> > +#define SDC_RESP3 0x4c
> > +#define SDC_BLK_NUM 0x50
> > +#define SDC_ACMD_RESP 0x80
> > +#define MSDC_DMA_SA 0x90
> > +#define MSDC_DMA_CTRL 0x98
> > +#define MSDC_DMA_CFG 0x9c
> > +#define MSDC_PATCH_BIT 0xb0
> > +#define MSDC_PATCH_BIT1 0xb4
> > +#define MSDC_PAD_TUNE 0xec
> > +
> > +/*--------------------------------------------------------------------------*/
> > +/* Register Mask */
> > +/*--------------------------------------------------------------------------*/
> > +
> > +/* MSDC_CFG mask */
> > +#define MSDC_CFG_MODE (0x1 << 0) /* RW */
> > +#define MSDC_CFG_CKPDN (0x1 << 1) /* RW */
> > +#define MSDC_CFG_RST (0x1 << 2) /* RW */
> > +#define MSDC_CFG_PIO (0x1 << 3) /* RW */
> > +#define MSDC_CFG_CKDRVEN (0x1 << 4) /* RW */
> > +#define MSDC_CFG_BV18SDT (0x1 << 5) /* RW */
> > +#define MSDC_CFG_BV18PSS (0x1 << 6) /* R */
> > +#define MSDC_CFG_CKSTB (0x1 << 7) /* R */
> > +#define MSDC_CFG_CKDIV (0xff << 8) /* RW */
> > +#define MSDC_CFG_CKMOD (0x3 << 16) /* RW */
> > +
> > +/* MSDC_IOCON mask */
> > +#define MSDC_IOCON_SDR104CKS (0x1 << 0) /* RW */
> > +#define MSDC_IOCON_RSPL (0x1 << 1) /* RW */
> > +#define MSDC_IOCON_DSPL (0x1 << 2) /* RW */
> > +#define MSDC_IOCON_DDLSEL (0x1 << 3) /* RW */
> > +#define MSDC_IOCON_DDR50CKD (0x1 << 4) /* RW */
> > +#define MSDC_IOCON_DSPLSEL (0x1 << 5) /* RW */
> > +#define MSDC_IOCON_W_DSPL (0x1 << 8) /* RW */
> > +#define MSDC_IOCON_D0SPL (0x1 << 16) /* RW */
> > +#define MSDC_IOCON_D1SPL (0x1 << 17) /* RW */
> > +#define MSDC_IOCON_D2SPL (0x1 << 18) /* RW */
> > +#define MSDC_IOCON_D3SPL (0x1 << 19) /* RW */
> > +#define MSDC_IOCON_D4SPL (0x1 << 20) /* RW */
> > +#define MSDC_IOCON_D5SPL (0x1 << 21) /* RW */
> > +#define MSDC_IOCON_D6SPL (0x1 << 22) /* RW */
> > +#define MSDC_IOCON_D7SPL (0x1 << 23) /* RW */
> > +#define MSDC_IOCON_RISCSZ (0x3 << 24) /* RW */
> > +
> > +/* MSDC_PS mask */
> > +#define MSDC_PS_CDEN (0x1 << 0) /* RW */
> > +#define MSDC_PS_CDSTS (0x1 << 1) /* R */
> > +#define MSDC_PS_CDDEBOUNCE (0xf << 12) /* RW */
> > +#define MSDC_PS_DAT (0xff << 16) /* R */
> > +#define MSDC_PS_CMD (0x1 << 24) /* R */
> > +#define MSDC_PS_WP (0x1 << 31) /* R */
> > +
> > +/* MSDC_INT mask */
> > +#define MSDC_INT_MMCIRQ (0x1 << 0) /* W1C */
> > +#define MSDC_INT_CDSC (0x1 << 1) /* W1C */
> > +#define MSDC_INT_ACMDRDY (0x1 << 3) /* W1C */
> > +#define MSDC_INT_ACMDTMO (0x1 << 4) /* W1C */
> > +#define MSDC_INT_ACMDCRCERR (0x1 << 5) /* W1C */
> > +#define MSDC_INT_DMAQ_EMPTY (0x1 << 6) /* W1C */
> > +#define MSDC_INT_SDIOIRQ (0x1 << 7) /* W1C */
> > +#define MSDC_INT_CMDRDY (0x1 << 8) /* W1C */
> > +#define MSDC_INT_CMDTMO (0x1 << 9) /* W1C */
> > +#define MSDC_INT_RSPCRCERR (0x1 << 10) /* W1C */
> > +#define MSDC_INT_CSTA (0x1 << 11) /* R */
> > +#define MSDC_INT_XFER_COMPL (0x1 << 12) /* W1C */
> > +#define MSDC_INT_DXFER_DONE (0x1 << 13) /* W1C */
> > +#define MSDC_INT_DATTMO (0x1 << 14) /* W1C */
> > +#define MSDC_INT_DATCRCERR (0x1 << 15) /* W1C */
> > +#define MSDC_INT_ACMD19_DONE (0x1 << 16) /* W1C */
> > +#define MSDC_INT_DMA_BDCSERR (0x1 << 17) /* W1C */
> > +#define MSDC_INT_DMA_GPDCSERR (0x1 << 18) /* W1C */
> > +#define MSDC_INT_DMA_PROTECT (0x1 << 19) /* W1C */
> > +
> > +/* MSDC_INTEN mask */
> > +#define MSDC_INTEN_MMCIRQ (0x1 << 0) /* RW */
> > +#define MSDC_INTEN_CDSC (0x1 << 1) /* RW */
> > +#define MSDC_INTEN_ACMDRDY (0x1 << 3) /* RW */
> > +#define MSDC_INTEN_ACMDTMO (0x1 << 4) /* RW */
> > +#define MSDC_INTEN_ACMDCRCERR (0x1 << 5) /* RW */
> > +#define MSDC_INTEN_DMAQ_EMPTY (0x1 << 6) /* RW */
> > +#define MSDC_INTEN_SDIOIRQ (0x1 << 7) /* RW */
> > +#define MSDC_INTEN_CMDRDY (0x1 << 8) /* RW */
> > +#define MSDC_INTEN_CMDTMO (0x1 << 9) /* RW */
> > +#define MSDC_INTEN_RSPCRCERR (0x1 << 10) /* RW */
> > +#define MSDC_INTEN_CSTA (0x1 << 11) /* RW */
> > +#define MSDC_INTEN_XFER_COMPL (0x1 << 12) /* RW */
> > +#define MSDC_INTEN_DXFER_DONE (0x1 << 13) /* RW */
> > +#define MSDC_INTEN_DATTMO (0x1 << 14) /* RW */
> > +#define MSDC_INTEN_DATCRCERR (0x1 << 15) /* RW */
> > +#define MSDC_INTEN_ACMD19_DONE (0x1 << 16) /* RW */
> > +#define MSDC_INTEN_DMA_BDCSERR (0x1 << 17) /* RW */
> > +#define MSDC_INTEN_DMA_GPDCSERR (0x1 << 18) /* RW */
> > +#define MSDC_INTEN_DMA_PROTECT (0x1 << 19) /* RW */
> > +
> > +/* MSDC_FIFOCS mask */
> > +#define MSDC_FIFOCS_RXCNT (0xff << 0) /* R */
> > +#define MSDC_FIFOCS_TXCNT (0xff << 16) /* R */
> > +#define MSDC_FIFOCS_CLR (0x1 << 31) /* RW */
> > +
> > +/* SDC_CFG mask */
> > +#define SDC_CFG_SDIOINTWKUP (0x1 << 0) /* RW */
> > +#define SDC_CFG_INSWKUP (0x1 << 1) /* RW */
> > +#define SDC_CFG_BUSWIDTH (0x3 << 16) /* RW */
> > +#define SDC_CFG_SDIO (0x1 << 19) /* RW */
> > +#define SDC_CFG_SDIOIDE (0x1 << 20) /* RW */
> > +#define SDC_CFG_INTATGAP (0x1 << 21) /* RW */
> > +#define SDC_CFG_DTOC (0xff << 24) /* RW */
> > +
> > +/* SDC_STS mask */
> > +#define SDC_STS_SDCBUSY (0x1 << 0) /* RW */
> > +#define SDC_STS_CMDBUSY (0x1 << 1) /* RW */
> > +#define SDC_STS_SWR_COMPL (0x1 << 31) /* RW */
> > +
> > +/* MSDC_DMA_CTRL mask */
> > +#define MSDC_DMA_CTRL_START (0x1 << 0) /* W */
> > +#define MSDC_DMA_CTRL_STOP (0x1 << 1) /* W */
> > +#define MSDC_DMA_CTRL_RESUME (0x1 << 2) /* W */
> > +#define MSDC_DMA_CTRL_MODE (0x1 << 8) /* RW */
> > +#define MSDC_DMA_CTRL_LASTBUF (0x1 << 10) /* RW */
> > +#define MSDC_DMA_CTRL_BRUSTSZ (0x7 << 12) /* RW */
> > +
> > +/* MSDC_DMA_CFG mask */
> > +#define MSDC_DMA_CFG_STS (0x1 << 0) /* R */
> > +#define MSDC_DMA_CFG_DECSEN (0x1 << 1) /* RW */
> > +#define MSDC_DMA_CFG_AHBHPROT2 (0x2 << 8) /* RW */
> > +#define MSDC_DMA_CFG_ACTIVEEN (0x2 << 12) /* RW */
> > +#define MSDC_DMA_CFG_CS12B16B (0x1 << 16) /* RW */
> > +
> > +/* MSDC_PATCH_BIT mask */
> > +#define MSDC_PATCH_BIT_ODDSUPP (0x1 << 1) /* RW */
> > +#define MSDC_INT_DAT_LATCH_CK_SEL (0x7 << 7)
> > +#define MSDC_CKGEN_MSDC_DLY_SEL (0x1f << 10)
> > +#define MSDC_PATCH_BIT_IODSSEL (0x1 << 16) /* RW */
> > +#define MSDC_PATCH_BIT_IOINTSEL (0x1 << 17) /* RW */
> > +#define MSDC_PATCH_BIT_BUSYDLY (0xf << 18) /* RW */
> > +#define MSDC_PATCH_BIT_WDOD (0xf << 22) /* RW */
> > +#define MSDC_PATCH_BIT_IDRTSEL (0x1 << 26) /* RW */
> > +#define MSDC_PATCH_BIT_CMDFSEL (0x1 << 27) /* RW */
> > +#define MSDC_PATCH_BIT_INTDLSEL (0x1 << 28) /* RW */
> > +#define MSDC_PATCH_BIT_SPCPUSH (0x1 << 29) /* RW */
> > +#define MSDC_PATCH_BIT_DECRCTMO (0x1 << 30) /* RW */
> > +
> > +#define REQ_CMD_EIO (0x1 << 0)
> > +#define REQ_CMD_TMO (0x1 << 1)
> > +#define REQ_DAT_ERR (0x1 << 2)
> > +#define REQ_STOP_EIO (0x1 << 3)
> > +#define REQ_STOP_TMO (0x1 << 4)
> > +#define REQ_CMD_BUSY (0x1 << 5)
> > +
> > +#define MSDC_PREPARE_FLAG (0x1 << 0)
> > +#define MSDC_ASYNC_FLAG (0x1 << 1)
> > +#define MSDC_MMAP_FLAG (0x1 << 2)
> > +
> > +#define CMD_TIMEOUT (HZ/10 * 5) /* 100ms x5 */
> > +#define DAT_TIMEOUT (HZ * 5) /* 1000ms x5 */
> > +
> > +/*--------------------------------------------------------------------------*/
> > +/* Descriptor Structure */
> > +/*--------------------------------------------------------------------------*/
> > +struct mt_gpdma_desc {
> > + u32 first_u32;
> > +#define GPDMA_DESC_HWO (0x1 << 0)
> > +#define GPDMA_DESC_BDP (0x1 << 1)
> > +#define GPDMA_DESC_CHECKSUM (0xff << 8) /* bit8 ~ bit15 */
> > +#define GPDMA_DESC_INT (0x1 << 16)
> > + u32 next;
> > + u32 ptr;
> > + u32 second_u32;
> > +#define GPDMA_DESC_BUFLEN (0xffff) /* bit0 ~ bit15 */
> > +#define GPDMA_DESC_EXTLEN (0xff << 16) /* bit16 ~ bit23 */
> > + u32 arg;
> > + u32 blknum;
> > + u32 cmd;
> > +};
> > +
> > +struct mt_bdma_desc {
> > + u32 first_u32;
> > +#define BDMA_DESC_EOL (0x1 << 0)
> > +#define BDMA_DESC_CHECKSUM (0xff << 8) /* bit8 ~ bit15 */
> > +#define BDMA_DESC_BLKPAD (0x1 << 17)
> > +#define BDMA_DESC_DWPAD (0x1 << 18)
> > + u32 next;
> > + u32 ptr;
> > + u32 second_u32;
> > +#define BDMA_DESC_BUFLEN (0xffff) /* bit0 ~ bit15 */
> > +};
> > +
> > +struct msdc_dma {
> > + struct scatterlist *sg; /* I/O scatter list */
> > + struct mt_gpdma_desc *gpd; /* pointer to gpd array */
> > + struct mt_bdma_desc *bd; /* pointer to bd array */
> > + dma_addr_t gpd_addr; /* the physical address of gpd array */
> > + dma_addr_t bd_addr; /* the physical address of bd array */
> > +};
> > +
> > +struct msdc_host {
> > + struct device *dev;
> > + struct mmc_host *mmc; /* mmc structure */
> > + int cmd_rsp;
> > +
> > + spinlock_t lock;
> > + struct mmc_request *mrq;
> > + struct mmc_command *cmd;
> > + struct mmc_data *data;
> > + int error;
> > +
> > + void __iomem *base; /* host base address */
> > +
> > + struct msdc_dma dma; /* dma channel */
> > +
> > + u32 timeout_ns; /* data timeout ns */
> > + u32 timeout_clks; /* data timeout clks */
> > +
> > + struct pinctrl *pinctrl;
> > + struct pinctrl_state *pins_default;
> > + struct pinctrl_state *pins_uhs;
> > + struct delayed_work req_timeout;
> > + int irq; /* host interrupt */
> > +
> > + struct clk *src_clk; /* msdc source clock */
> > + struct clk *h_clk; /* msdc h_clk */
> > + u32 mclk; /* mmc subsystem clock */
> > + u32 hclk; /* host clock speed */
> > + u32 sclk; /* SD/MS clock speed */
> > + bool ddr;
> > + bool vqmmc_enabled;
> > + bool sclk_enabled; /* source clock enabled */
> > + bool hclk_enabled; /* Hclk enabled */
> > +};
> > +
> > +static void sdr_set_bits(void __iomem *reg, u32 bs)
> > +{
> > + u32 val = readl(reg);
> > +
> > + val |= bs;
> > + writel(val, reg);
> > +}
> > +
> > +static void sdr_clr_bits(void __iomem *reg, u32 bs)
> > +{
> > + u32 val = readl(reg);
> > +
> > + val &= ~(u32)bs;
> > + writel(val, reg);
> > +}
> > +
> > +static void sdr_set_field(void __iomem *reg, u32 field, u32 val)
> > +{
> > + unsigned int tv = readl(reg);
> > +
> > + tv &= ~field;
> > + tv |= ((val) << (ffs((unsigned int)field) - 1));
> > + writel(tv, reg);
> > +}
> > +
> > +static void sdr_get_field(void __iomem *reg, u32 field, u32 *val)
> > +{
> > + unsigned int tv = readl(reg);
> > +
> > + *val = ((tv & field) >> (ffs((unsigned int)field) - 1));
> > +}
> > +
> > +static void msdc_reset_hw(struct msdc_host *host)
> > +{
> > + u32 val;
> > +
> > + sdr_set_bits(host->base + MSDC_CFG, MSDC_CFG_RST);
> > + while (readl(host->base + MSDC_CFG) & MSDC_CFG_RST)
> > + cpu_relax();
> > +
> > + sdr_set_bits(host->base + MSDC_FIFOCS, MSDC_FIFOCS_CLR);
> > + while (readl(host->base + MSDC_FIFOCS) & MSDC_FIFOCS_CLR)
> > + cpu_relax();
> > +
> > + val = readl(host->base + MSDC_INT);
> > + writel(val, host->base + MSDC_INT);
> > +}
> > +
> > +static void msdc_cmd_next(struct msdc_host *host,
> > + struct mmc_request *mrq, struct mmc_command *cmd);
> > +
> > +static u32 data_ints_mask = MSDC_INTEN_XFER_COMPL | MSDC_INTEN_DATTMO |
> > + MSDC_INTEN_DATCRCERR | MSDC_INTEN_DMA_BDCSERR |
> > + MSDC_INTEN_DMA_GPDCSERR | MSDC_INTEN_DMA_PROTECT;
> > +
> > +static u8 msdc_dma_calcs(u8 *buf, u32 len)
> > +{
> > + u32 i, sum = 0;
> > +
> > + for (i = 0; i < len; i++)
> > + sum += buf[i];
> > + return 0xff - (u8) sum;
> > +}
> > +
> > +static inline void msdc_dma_setup(struct msdc_host *host, struct msdc_dma *dma,
> > + struct mmc_data *data)
> > +{
> > + u32 sglen, j;
> > + u32 dma_address, dma_len;
> > + struct scatterlist *sg;
> > + struct mt_gpdma_desc *gpd;
> > + struct mt_bdma_desc *bd;
> > +
> > + sglen = data->sg_len;
> > + sg = data->sg;
> > +
> > + gpd = dma->gpd;
> > + bd = dma->bd;
> > +
> > + /* modify gpd */
> > + gpd->first_u32 |= GPDMA_DESC_HWO;
> > + gpd->first_u32 |= GPDMA_DESC_BDP;
> > + /* need to clear first. use these bits to calc checksum */
> > + gpd->first_u32 &= ~GPDMA_DESC_CHECKSUM;
> > + gpd->first_u32 |= msdc_dma_calcs((u8 *) gpd, 16) << 8;
> > +
> > + /* modify bd */
> > + for (j = 0; j < sglen; j++) {
> > + dma_address = sg_dma_address(sg);
> > + dma_len = sg_dma_len(sg);
> > +
> > + /* init bd */
> > + bd[j].first_u32 &= ~BDMA_DESC_BLKPAD;
> > + bd[j].first_u32 &= ~BDMA_DESC_DWPAD;
> > + bd[j].ptr = (u32)dma_address;
> > + bd[j].second_u32 &= ~BDMA_DESC_BUFLEN;
> > + bd[j].second_u32 |= (dma_len & BDMA_DESC_BUFLEN);
> > +
> > + if (j == sglen - 1) /* the last bd */
> > + bd[j].first_u32 |= BDMA_DESC_EOL;
> > + else
> > + bd[j].first_u32 &= ~BDMA_DESC_EOL;
> > +
> > + /* checksume need to clear first */
> > + bd[j].first_u32 &= ~BDMA_DESC_CHECKSUM;
> > + bd[j].first_u32 |= msdc_dma_calcs((u8 *)(&bd[j]), 16) << 8;
> > + sg++;
> > + }
> > +
> > + sdr_set_field(host->base + MSDC_DMA_CFG, MSDC_DMA_CFG_DECSEN, 1);
> > + sdr_set_field(host->base + MSDC_DMA_CTRL, MSDC_DMA_CTRL_BRUSTSZ,
> > + MSDC_BURST_64B);
> > + sdr_set_field(host->base + MSDC_DMA_CTRL, MSDC_DMA_CTRL_MODE, 1);
> > +
> > + writel((u32)dma->gpd_addr, host->base + MSDC_DMA_SA);
> > +}
> > +
> > +static void msdc_prepare_data(struct msdc_host *host, struct mmc_request *mrq)
> > +{
> > + struct mmc_data *data = mrq->data;
> > +
> > + if (!(data->host_cookie & MSDC_PREPARE_FLAG)) {
> > + bool read = (data->flags & MMC_DATA_READ) != 0;
> > +
> > + data->host_cookie |= MSDC_PREPARE_FLAG;
> > + dma_map_sg(host->dev, data->sg, data->sg_len,
> > + read ? DMA_FROM_DEVICE : DMA_TO_DEVICE);
> > + }
> > +}
> > +
> > +static void msdc_unprepare_data(struct msdc_host *host, struct mmc_request *mrq)
> > +{
> > + struct mmc_data *data = mrq->data;
> > +
> > + if (data->host_cookie & MSDC_ASYNC_FLAG)
> > + return;
> > +
> > + if ((data->host_cookie & MSDC_PREPARE_FLAG)) {
> > + bool read = (data->flags & MMC_DATA_READ) != 0;
> > +
> > + dma_unmap_sg(host->dev, data->sg, data->sg_len,
> > + read ? DMA_FROM_DEVICE : DMA_TO_DEVICE);
> > + data->host_cookie &= ~MSDC_PREPARE_FLAG;
> > + }
> > +}
> > +
> > +/* clock control primitives */
> > +static void msdc_set_timeout(struct msdc_host *host, u32 ns, u32 clks)
> > +{
> > + u32 timeout, clk_ns;
> > + u32 mode = 0;
> > +
> > + host->timeout_ns = ns;
> > + host->timeout_clks = clks;
> > + if (host->sclk == 0) {
> > + timeout = 0;
> > + } else {
> > + clk_ns = 1000000000UL / host->sclk;
> > + timeout = (ns + clk_ns - 1) / clk_ns + clks;
> > + /* in 1048576 sclk cycle unit */
> > + timeout = (timeout + (0x1 << 20) - 1) >> 20;
> > + sdr_get_field(host->base + MSDC_CFG, MSDC_CFG_CKMOD, &mode);
> > + /*DDR mode will double the clk cycles for data timeout */
> > + timeout = mode >= 2 ? timeout * 2 : timeout;
> > + timeout = timeout > 1 ? timeout - 1 : 0;
> > + timeout = timeout > 255 ? 255 : timeout;
> > + }
> > + sdr_set_field(host->base + SDC_CFG, SDC_CFG_DTOC, timeout);
> > +}
> > +
> > +static void msdc_disable_src_clk(struct msdc_host *host)
> > +{
> > + if (host->sclk_enabled) {
> > + clk_disable_unprepare(host->src_clk);
> > + host->sclk_enabled = false;
> > + }
> > +}
> > +
> > +static void msdc_enable_src_clk(struct msdc_host *host)
> > +{
> > + if (!host->sclk_enabled) {
> > + clk_prepare_enable(host->src_clk);
> > + host->sclk_enabled = true;
> > + }
> > + while (!(readl(host->base + MSDC_CFG) & MSDC_CFG_CKSTB))
> > + cpu_relax();
> > +}
> > +
> > +static void msdc_gate_clock(struct msdc_host *host)
> > +{
> > + msdc_disable_src_clk(host);
> > + if (!IS_ERR(host->h_clk) && host->hclk_enabled) {
>
> You are invoking msdc_gate_clock() and msdc_ungate_clock() in a
> balanced manner, thus hclk_enabled is redundant. Please remove it.
on drv->probe(), already invoke the msdc_ungate_clock(), so, when the
runtime pm resume invoke the msdc_ungate_clock(), the hclk already
enabled.
>
> > + clk_disable_unprepare(host->h_clk);
> > + host->hclk_enabled = false;
> > + }
> > +}
> > +
> > +static void msdc_ungate_clock(struct msdc_host *host)
> > +{
> > + if (!IS_ERR(host->h_clk) && !host->hclk_enabled) {
> > + clk_prepare_enable(host->h_clk);
> > + host->hclk_enabled = true;
> > + }
> > + msdc_enable_src_clk(host);
> > +}
> > +
> > +static void msdc_set_mclk(struct msdc_host *host, int ddr, u32 hz)
> > +{
> > + u32 mode;
> > + u32 flags;
> > + u32 div;
> > + u32 sclk;
> > + u32 hclk = host->hclk;
> > +
> > + if (!hz) {
> > + dev_dbg(host->dev, "set mclk to 0\n");
> > + host->mclk = 0;
> > + msdc_disable_src_clk(host);
>
> So this will trigger a clk_disable_unprepare() of the src_clk, if
> possible would rather not do that here.
>
> I assume it's possible to gate the clock by updating a MSDC register
> instead!? That would be prefereable since then you can leave clock
> gating/ungating via the clk API, to be dealt from runtime PM. That
> would also make "sclk_enabled" in the struct msdc_host redundant.
>
> Adopting to above, obviously requires MSDC to be able to ungate the
> clock by also updating a MSDC register. I assume that's possible as
> well!?
>
We can set the bit1 of MSDC_CFG, when this bit is 0, the bus clock was
gated to 0 if no command or data is transmitted.
And, from our designer, when we operate the MSDC register, we need make
sure both HCLK and source are enabled, if source clock was disabled,
write some MSDC registers will have no effect(eg. send CMD, without
source clock, not only cannot send CMD, but also cannot get CMD timeout
interrupt.)
> > + return;
> > + }
> > +
> > + flags = readl(host->base + MSDC_INTEN);
> > + sdr_clr_bits(host->base + MSDC_INTEN, flags);
> > + if (ddr) { /* may need to modify later */
> > + mode = 0x2; /* ddr mode and use divisor */
> > + if (hz >= (hclk >> 2)) {
> > + div = 0; /* mean div = 1/4 */
> > + sclk = hclk >> 2; /* sclk = clk / 4 */
> > + } else {
> > + div = (hclk + ((hz << 2) - 1)) / (hz << 2);
> > + sclk = (hclk >> 2) / div;
> > + div = (div >> 1);
> > + }
> > + } else if (hz >= hclk) {
> > + mode = 0x1; /* no divisor */
> > + div = 0;
> > + sclk = hclk;
> > + } else {
> > + mode = 0x0; /* use divisor */
> > + if (hz >= (hclk >> 1)) {
> > + div = 0; /* mean div = 1/2 */
> > + sclk = hclk >> 1; /* sclk = clk / 2 */
> > + } else {
> > + div = (hclk + ((hz << 2) - 1)) / (hz << 2);
> > + sclk = (hclk >> 2) / div;
> > + }
> > + }
> > + sdr_set_field(host->base + MSDC_CFG, MSDC_CFG_CKMOD | MSDC_CFG_CKDIV,
> > + (mode << 8) | (div % 0xff));
> > + msdc_enable_src_clk(host);
> > + host->sclk = sclk;
> > + host->mclk = hz;
> > + host->ddr = ddr;
> > + /* need because clk changed. */
> > + msdc_set_timeout(host, host->timeout_ns, host->timeout_clks);
> > + sdr_set_bits(host->base + MSDC_INTEN, flags);
> > +
> > + dev_dbg(host->dev, "sclk: %d, ddr: %d\n", host->sclk, ddr);
> > +}
> > +
> > +static inline u32 msdc_cmd_find_resp(struct msdc_host *host,
> > + struct mmc_request *mrq, struct mmc_command *cmd)
> > +{
> > + u32 resp;
> > +
> > + switch (mmc_resp_type(cmd)) {
> > + /* Actually, R1, R5, R6, R7 are the same */
> > + case MMC_RSP_R1:
> > + resp = 0x1;
> > + break;
> > + case MMC_RSP_R1B:
> > + resp = 0x7;
> > + break;
> > + case MMC_RSP_R2:
> > + resp = 0x2;
> > + break;
> > + case MMC_RSP_R3:
> > + resp = 0x3;
> > + break;
> > + case MMC_RSP_NONE:
> > + default:
> > + resp = 0x0;
> > + break;
> > + }
> > +
> > + return resp;
> > +}
> > +
> > +static inline u32 msdc_cmd_prepare_raw_cmd(struct msdc_host *host,
> > + struct mmc_request *mrq, struct mmc_command *cmd)
> > +{
> > + /* rawcmd :
> > + * vol_swt << 30 | auto_cmd << 28 | blklen << 16 | go_irq << 15 |
> > + * stop << 14 | rw << 13 | dtype << 11 | rsptyp << 7 | brk << 6 | opcode
> > + */
> > + u32 opcode = cmd->opcode;
> > + u32 resp = msdc_cmd_find_resp(host, mrq, cmd);
> > + u32 rawcmd = (opcode & 0x3f) | ((resp & 0x7) << 7);
> > +
> > + host->cmd_rsp = resp;
> > +
> > + if ((opcode == SD_IO_RW_DIRECT && cmd->flags == (unsigned int) -1) ||
> > + opcode == MMC_STOP_TRANSMISSION)
> > + rawcmd |= (0x1 << 14);
> > + else if (opcode == SD_SWITCH_VOLTAGE)
> > + rawcmd |= (0x1 << 30);
> > + else if ((opcode == SD_APP_SEND_SCR) ||
> > + (opcode == SD_APP_SEND_NUM_WR_BLKS) ||
> > + (opcode == SD_SWITCH &&
> > + (mmc_cmd_type(cmd) == MMC_CMD_ADTC)) ||
> > + (opcode == SD_APP_SD_STATUS &&
> > + (mmc_cmd_type(cmd) == MMC_CMD_ADTC)) ||
> > + (opcode == MMC_SEND_EXT_CSD &&
> > + (mmc_cmd_type(cmd) == MMC_CMD_ADTC)))
> > + rawcmd |= (0x1 << 11);
> > +
> > + if (cmd->data) {
> > + struct mmc_data *data = cmd->data;
> > +
> > + if (mmc_op_multi(opcode)) {
> > + if (mmc_card_mmc(host->mmc->card) && mrq->sbc &&
> > + !(mrq->sbc->arg & 0xFFFF0000))
> > + rawcmd |= 0x2 << 28; /* AutoCMD23 */
> > + }
> > +
> > + rawcmd |= ((data->blksz & 0xFFF) << 16);
> > + if (data->flags & MMC_DATA_WRITE)
> > + rawcmd |= (0x1 << 13);
> > + if (data->blocks > 1)
> > + rawcmd |= (0x2 << 11);
> > + else
> > + rawcmd |= (0x1 << 11);
> > + /* Always use dma mode */
> > + sdr_clr_bits(host->base + MSDC_CFG, MSDC_CFG_PIO);
> > +
> > + if (((host->timeout_ns != data->timeout_ns) ||
> > + (host->timeout_clks != data->timeout_clks))) {
> > + msdc_set_timeout(host, data->timeout_ns,
> > + data->timeout_clks);
> > + }
> > +
> > + writel(data->blocks, host->base + SDC_BLK_NUM);
> > + }
> > + return rawcmd;
> > +}
> > +
> > +static void msdc_start_data(struct msdc_host *host, struct mmc_request *mrq,
> > + struct mmc_command *cmd, struct mmc_data *data)
> > +{
> > + bool read;
> > + unsigned long flags;
> > +
> > + spin_lock_irqsave(&host->lock, flags);
> > + if (!host->data)
> > + host->data = data;
> > + else
> > + WARN_ON(host->data);
> > + spin_unlock_irqrestore(&host->lock, flags);
> > + read = data->flags & MMC_DATA_READ;
> > +
> > + mod_delayed_work(system_wq, &host->req_timeout, DAT_TIMEOUT);
> > + msdc_dma_setup(host, &host->dma, data);
> > + sdr_set_bits(host->base + MSDC_INTEN, data_ints_mask);
> > + mb(); /* wait for pending IO to finish */
> > + sdr_set_field(host->base + MSDC_DMA_CTRL, MSDC_DMA_CTRL_START, 1);
> > + dev_dbg(host->dev, "DMA start\n");
> > + dev_dbg(host->dev, "%s: cmd=%d DMA data: %d blocks; read=%d\n",
> > + __func__, cmd->opcode, data->blocks, read);
> > +}
> > +
> > +static int msdc_auto_cmd_done(struct msdc_host *host, int events,
> > + struct mmc_command *cmd)
> > +{
> > + u32 *rsp = cmd->resp;
> > +
> > + rsp[0] = readl(host->base + SDC_ACMD_RESP);
> > +
> > + if (events & MSDC_INT_ACMDRDY) {
> > + cmd->error = 0;
> > + } else {
> > + msdc_reset_hw(host);
> > + if (events & MSDC_INT_ACMDCRCERR) {
> > + cmd->error = -EILSEQ;
> > + host->error |= REQ_STOP_EIO;
> > + } else if (events & MSDC_INT_ACMDTMO) {
> > + cmd->error = -ETIMEDOUT;
> > + host->error |= REQ_STOP_TMO;
> > + }
> > + dev_err(host->dev,
> > + "%s: AUTO_CMD%d arg=%08X; rsp %08X; cmd_error=%d\n",
> > + __func__, cmd->opcode, cmd->arg, rsp[0], cmd->error);
> > + }
> > + return cmd->error;
> > +}
> > +
> > +static void msdc_track_cmd_data(struct msdc_host *host,
> > + struct mmc_command *cmd, struct mmc_data *data)
> > +{
> > + if (host->error)
> > + dev_dbg(host->dev, "%s: cmd=%d arg=%08X; host->error=0x%08X\n",
> > + __func__, cmd->opcode, cmd->arg, host->error);
> > +}
> > +
> > +static void msdc_request_done(struct msdc_host *host, struct mmc_request *mrq)
> > +{
> > + unsigned long flags;
> > + bool ret;
> > +
> > + ret = cancel_delayed_work(&host->req_timeout);
> > + if (!ret) {
> > + /* delay work already running */
> > + return;
> > + }
> > + spin_lock_irqsave(&host->lock, flags);
> > + host->mrq = NULL;
> > + spin_unlock_irqrestore(&host->lock, flags);
> > +
> > + msdc_track_cmd_data(host, mrq->cmd, mrq->data);
> > + if (mrq->data)
> > + msdc_unprepare_data(host, mrq);
> > + mmc_request_done(host->mmc, mrq);
> > +}
> > +
> > +/* returns true if command is fully handled; returns false otherwise */
> > +static bool msdc_cmd_done(struct msdc_host *host, int events,
> > + struct mmc_request *mrq, struct mmc_command *cmd)
> > +{
> > + bool done = false;
> > + bool sbc_error;
> > + unsigned long flags;
> > + u32 *rsp = cmd->resp;
> > +
> > + if (mrq->sbc && cmd == mrq->cmd &&
> > + (events & (MSDC_INT_ACMDRDY | MSDC_INT_ACMDCRCERR
> > + | MSDC_INT_ACMDTMO)))
> > + msdc_auto_cmd_done(host, events, mrq->sbc);
> > +
> > + sbc_error = mrq->sbc && mrq->sbc->error;
> > +
> > + if (!sbc_error && !(events & (MSDC_INT_CMDRDY
> > + | MSDC_INT_RSPCRCERR
> > + | MSDC_INT_CMDTMO)))
> > + return done;
> > +
> > + spin_lock_irqsave(&host->lock, flags);
> > + done = !host->cmd;
> > + host->cmd = NULL;
> > + spin_unlock_irqrestore(&host->lock, flags);
> > +
> > + if (done)
> > + return true;
> > +
> > + sdr_clr_bits(host->base + MSDC_INTEN, MSDC_INTEN_CMDRDY |
> > + MSDC_INTEN_RSPCRCERR | MSDC_INTEN_CMDTMO |
> > + MSDC_INTEN_ACMDRDY | MSDC_INTEN_ACMDCRCERR |
> > + MSDC_INTEN_ACMDTMO);
> > + writel(cmd->arg, host->base + SDC_ARG);
> > +
> > + switch (host->cmd_rsp) {
> > + case 0:
> > + break;
> > + case 2:
> > + rsp[0] = readl(host->base + SDC_RESP3);
> > + rsp[1] = readl(host->base + SDC_RESP2);
> > + rsp[2] = readl(host->base + SDC_RESP1);
> > + rsp[3] = readl(host->base + SDC_RESP0);
> > + break;
> > + default: /* Response types 1, 3, 4, 5, 6, 7(1b) */
> > + rsp[0] = readl(host->base + SDC_RESP0);
> > + break;
> > + }
> > + if (!sbc_error && !(events & MSDC_INT_CMDRDY)) {
> > + msdc_reset_hw(host);
> > + if (events & MSDC_INT_RSPCRCERR) {
> > + cmd->error = -EILSEQ;
> > + host->error |= REQ_CMD_EIO;
> > + } else if (events & MSDC_INT_CMDTMO) {
> > + cmd->error = -ETIMEDOUT;
> > + host->error |= REQ_CMD_TMO;
> > + }
> > + }
> > + if (cmd->error)
> > + dev_dbg(host->dev,
> > + "%s: cmd=%d arg=%08X; rsp %08X; cmd_error=%d\n",
> > + __func__, cmd->opcode, cmd->arg, rsp[0],
> > + cmd->error);
> > +
> > + msdc_cmd_next(host, mrq, cmd);
> > + done = true;
> > + return done;
> > +}
> > +
> > +static inline bool msdc_cmd_is_ready(struct msdc_host *host,
> > + struct mmc_request *mrq, struct mmc_command *cmd)
> > +{
> > + unsigned long tmo = jiffies + msecs_to_jiffies(20);
> > +
> > + while ((readl(host->base + SDC_STS) & SDC_STS_CMDBUSY)
> > + && time_before(jiffies, tmo))
> > + continue;
> > +
> > + if (readl(host->base + SDC_STS) & SDC_STS_CMDBUSY) {
> > + dev_err(host->dev, "CMD bus busy detected\n");
> > + host->error |= REQ_CMD_BUSY;
> > + msdc_cmd_done(host, MSDC_INT_CMDTMO, mrq, cmd);
> > + return false;
> > + }
> > +
> > + if (mmc_resp_type(cmd) == MMC_RSP_R1B || cmd->data) {
> > + /* R1B or with data, should check SDCBUSY */
> > + while (readl(host->base + SDC_STS) & SDC_STS_SDCBUSY)
> > + cpu_relax();
> > + }
>
> MSDC seems to be handling card busy detection in HW, right?
>
Do not have this ability, HW only know if CMD/DAT is low, but do not
have any interrupt for it,
> If so, you should enable MMC_CAP_WAIT_WHILE_BUSY and set
> "max_busy_timeout" to DAT_TIMEOUT to inform the mmc core about it.
>
> > + return true;
> > +}
> > +
> > +static void msdc_start_command(struct msdc_host *host,
> > + struct mmc_request *mrq, struct mmc_command *cmd)
> > +{
> > + u32 rawcmd;
> > + unsigned long flags;
> > +
> > + spin_lock_irqsave(&host->lock, flags);
> > + if (host->cmd)
> > + WARN_ON(host->cmd);
> > + else
> > + host->cmd = cmd;
> > + spin_unlock_irqrestore(&host->lock, flags);
> > +
> > + if (!msdc_cmd_is_ready(host, mrq, cmd))
> > + return;
> > +
> > + if ((readl(host->base + MSDC_FIFOCS) & MSDC_FIFOCS_TXCNT) >> 16
> > + || (readl(host->base + MSDC_FIFOCS) & MSDC_FIFOCS_RXCNT)) {
> > + dev_err(host->dev, "TX/RX FIFO non-empty before start of IO. Reset\n");
> > + msdc_reset_hw(host);
> > + }
> > +
> > + cmd->error = 0;
> > + rawcmd = msdc_cmd_prepare_raw_cmd(host, mrq, cmd);
> > + mod_delayed_work(system_wq, &host->req_timeout, DAT_TIMEOUT);
> > +
> > + sdr_set_bits(host->base + MSDC_INTEN, MSDC_INTEN_CMDRDY |
> > + MSDC_INTEN_RSPCRCERR | MSDC_INTEN_CMDTMO |
> > + MSDC_INTEN_ACMDRDY | MSDC_INTEN_ACMDCRCERR |
> > + MSDC_INTEN_ACMDTMO);
> > + writel(cmd->arg, host->base + SDC_ARG);
> > + writel(rawcmd, host->base + SDC_CMD);
> > +}
> > +
> > +static void msdc_cmd_next(struct msdc_host *host,
> > + struct mmc_request *mrq, struct mmc_command *cmd)
> > +{
> > + if (cmd->error || (mrq->sbc && mrq->sbc->error))
> > + msdc_request_done(host, mrq);
> > + else if (cmd == mrq->sbc)
> > + msdc_start_command(host, mrq, mrq->cmd);
> > + else if (!cmd->data)
> > + msdc_request_done(host, mrq);
> > + else
> > + msdc_start_data(host, mrq, cmd, cmd->data);
> > +}
> > +
> > +static void msdc_ops_request(struct mmc_host *mmc, struct mmc_request *mrq)
> > +{
> > + unsigned long flags;
> > + struct msdc_host *host = mmc_priv(mmc);
> > +
> > + host->error = 0;
> > +
> > + spin_lock_irqsave(&host->lock, flags);
> > + if (!host->mrq)
> > + host->mrq = mrq;
> > + else
> > + WARN_ON(host->mrq);
> > + spin_unlock_irqrestore(&host->lock, flags);
> > +
> > + if (mrq->data)
> > + msdc_prepare_data(host, mrq);
> > +
> > + /* if SBC is required, we have HW option and SW option.
> > + * if HW option is enabled, and SBC does not have "special" flags,
> > + * use HW option, otherwise use SW option
> > + */
> > + if (mrq->sbc && (!mmc_card_mmc(mmc->card) ||
> > + (mrq->sbc->arg & 0xFFFF0000)))
> > + msdc_start_command(host, mrq, mrq->sbc);
> > + else
> > + msdc_start_command(host, mrq, mrq->cmd);
> > +}
> > +
> > +static void msdc_pre_req(struct mmc_host *mmc, struct mmc_request *mrq,
> > + bool is_first_req)
> > +{
> > + struct msdc_host *host = mmc_priv(mmc);
> > + struct mmc_data *data = mrq->data;
> > +
> > + if (!data)
> > + return;
> > +
> > + msdc_prepare_data(host, mrq);
> > + data->host_cookie |= MSDC_ASYNC_FLAG;
> > +}
> > +
> > +static void msdc_post_req(struct mmc_host *mmc, struct mmc_request *mrq,
> > + int err)
> > +{
> > + struct msdc_host *host = mmc_priv(mmc);
> > + struct mmc_data *data;
> > +
> > + data = mrq->data;
> > + if (!data)
> > + return;
> > + if (data->host_cookie) {
> > + data->host_cookie &= ~MSDC_ASYNC_FLAG;
> > + msdc_unprepare_data(host, mrq);
> > + }
> > +}
> > +
> > +static void msdc_data_xfer_next(struct msdc_host *host,
> > + struct mmc_request *mrq, struct mmc_data *data)
> > +{
> > + if (mmc_op_multi(mrq->cmd->opcode) && mrq->stop && !mrq->stop->error &&
> > + (!data->bytes_xfered || !mrq->sbc))
> > + msdc_start_command(host, mrq, mrq->stop);
> > + else
> > + msdc_request_done(host, mrq);
> > +}
> > +
> > +static bool msdc_data_xfer_done(struct msdc_host *host, u32 events,
> > + struct mmc_request *mrq, struct mmc_data *data)
> > +{
> > + struct mmc_command *stop = data->stop;
> > + unsigned long flags;
> > + bool done;
> > +
> > + bool check_data = (events &
> > + (MSDC_INT_XFER_COMPL | MSDC_INT_DATCRCERR | MSDC_INT_DATTMO
> > + | MSDC_INT_DMA_BDCSERR | MSDC_INT_DMA_GPDCSERR
> > + | MSDC_INT_DMA_PROTECT));
> > +
> > + spin_lock_irqsave(&host->lock, flags);
> > + done = !host->data;
> > + if (check_data)
> > + host->data = NULL;
> > + spin_unlock_irqrestore(&host->lock, flags);
> > +
> > + if (done)
> > + return true;
> > +
> > + if (check_data || (stop && stop->error)) {
> > + dev_dbg(host->dev, "DMA status: 0x%8X\n",
> > + readl(host->base + MSDC_DMA_CFG));
> > + sdr_set_field(host->base + MSDC_DMA_CTRL, MSDC_DMA_CTRL_STOP,
> > + 1);
> > + while (readl(host->base + MSDC_DMA_CFG) & MSDC_DMA_CFG_STS)
> > + ;
> > + mb(); /* wait for pending IO to finish */
> > + sdr_clr_bits(host->base + MSDC_INTEN, data_ints_mask);
> > + dev_dbg(host->dev, "DMA stop\n");
> > +
> > + if ((events & MSDC_INT_XFER_COMPL) && (!stop || !stop->error)) {
> > + data->bytes_xfered = data->blocks * data->blksz;
> > + } else {
> > + dev_err(host->dev, "interrupt events: %x\n", events);
> > + msdc_reset_hw(host);
> > + host->error |= REQ_DAT_ERR;
> > + data->bytes_xfered = 0;
> > +
> > + if (events & MSDC_INT_DATTMO)
> > + data->error = -ETIMEDOUT;
> > +
> > + dev_err(host->dev, "%s: cmd=%d; blocks=%d",
> > + __func__, mrq->cmd->opcode, data->blocks);
> > + dev_err(host->dev, "data_error=%d xfer_size=%d\n",
> > + (int)data->error, data->bytes_xfered);
> > + }
> > +
> > + msdc_data_xfer_next(host, mrq, data);
> > + done = true;
> > + }
> > + return done;
> > +}
> > +
> > +static void msdc_set_buswidth(struct msdc_host *host, u32 width)
> > +{
> > + u32 val = readl(host->base + SDC_CFG);
> > +
> > + val &= ~SDC_CFG_BUSWIDTH;
> > +
> > + switch (width) {
> > + default:
> > + case MMC_BUS_WIDTH_1:
> > + val |= (MSDC_BUS_1BITS << 16);
> > + break;
> > + case MMC_BUS_WIDTH_4:
> > + val |= (MSDC_BUS_4BITS << 16);
> > + break;
> > + case MMC_BUS_WIDTH_8:
> > + val |= (MSDC_BUS_8BITS << 16);
> > + break;
> > + }
> > +
> > + writel(val, host->base + SDC_CFG);
> > + dev_dbg(host->dev, "Bus Width = %d", width);
> > +}
> > +
> > +static int msdc_ops_switch_volt(struct mmc_host *mmc, struct mmc_ios *ios)
> > +{
> > + struct msdc_host *host = mmc_priv(mmc);
> > + int min_uv, max_uv;
> > + int ret = 0;
> > +
> > + if (!IS_ERR(mmc->supply.vqmmc)) {
> > + if (ios->signal_voltage == MMC_SIGNAL_VOLTAGE_330) {
> > + min_uv = 3300000;
> > + max_uv = 3300000;
> > + } else if (ios->signal_voltage == MMC_SIGNAL_VOLTAGE_180) {
> > + min_uv = 1800000;
> > + max_uv = 1800000;
> > + } else {
> > + dev_err(host->dev, "Unsupported signal voltage!\n");
> > + return -EINVAL;
> > + }
> > +
> > + ret = regulator_set_voltage(mmc->supply.vqmmc, min_uv, max_uv);
> > + if (ret) {
> > + dev_err(host->dev,
> > + "Regulator set error %d: %d - %d\n",
> > + ret, min_uv, max_uv);
> > + }
> > + }
> > + return ret;
> > +}
> > +
> > +static int msdc_card_busy(struct mmc_host *mmc)
> > +{
> > + struct msdc_host *host = mmc_priv(mmc);
> > + u32 status = readl(host->base + MSDC_PS);
> > +
> > + /* check if any pin between dat[0:3] is low */
> > + if (((status >> 16) & 0xf) != 0xf)
> > + return 1;
> > +
> > + return 0;
> > +}
> > +
> > +static void msdc_request_timeout(struct work_struct *work)
> > +{
> > + struct msdc_host *host = container_of(work, struct msdc_host,
> > + req_timeout.work);
> > +
> > + /* simulate HW timeout status */
> > + dev_err(host->dev, "%s: aborting cmd/data/mrq\n", __func__);
> > + if (host->mrq) {
> > + dev_err(host->dev, "%s: aborting mrq=%p cmd=%d\n", __func__,
> > + host->mrq, host->mrq->cmd->opcode);
> > + if (host->cmd) {
> > + dev_err(host->dev, "%s: aborting cmd=%d\n",
> > + __func__, host->cmd->opcode);
> > + msdc_cmd_done(host, MSDC_INT_CMDTMO, host->mrq,
> > + host->cmd);
> > + } else if (host->data) {
> > + dev_err(host->dev, "%s: abort data: cmd%d; %d blocks\n",
> > + __func__, host->mrq->cmd->opcode,
> > + host->data->blocks);
> > + msdc_data_xfer_done(host, MSDC_INT_DATTMO, host->mrq,
> > + host->data);
> > + }
> > + }
> > +}
> > +
> > +static irqreturn_t msdc_irq(int irq, void *dev_id)
> > +{
> > + struct msdc_host *host = (struct msdc_host *) dev_id;
> > +
> > + while (true) {
> > + unsigned long flags;
> > + struct mmc_request *mrq;
> > + struct mmc_command *cmd;
> > + struct mmc_data *data;
> > + u32 events, event_mask;
> > +
> > + spin_lock_irqsave(&host->lock, flags);
> > + events = readl(host->base + MSDC_INT);
> > + event_mask = readl(host->base + MSDC_INTEN);
> > + /* clear interrupts */
> > + writel(events & event_mask, host->base + MSDC_INT);
> > +
> > + mrq = host->mrq;
> > + cmd = host->cmd;
> > + data = host->data;
> > + spin_unlock_irqrestore(&host->lock, flags);
> > +
> > + if (!(events & event_mask))
> > + break;
> > +
> > + if (!mrq) {
> > + dev_err(host->dev,
> > + "%s: MRQ=NULL; events=%08X; event_mask=%08X\n",
> > + __func__, events, event_mask);
> > + WARN_ON(1);
> > + break;
> > + }
> > +
> > + dev_dbg(host->dev, "%s: events=%08X\n", __func__, events);
> > +
> > + if (cmd)
> > + msdc_cmd_done(host, events, mrq, cmd);
> > + else if (data)
> > + msdc_data_xfer_done(host, events, mrq, data);
> > + }
> > +
> > + return IRQ_HANDLED;
> > +}
> > +
> > +static void msdc_init_hw(struct msdc_host *host)
> > +{
> > + u32 val;
> > + /* Configure to MMC/SD mode, clock free running */
> > + sdr_set_bits(host->base + MSDC_CFG, MSDC_CFG_MODE);
> > + sdr_set_bits(host->base + MSDC_CFG, MSDC_CFG_CKPDN);
> > +
> > + /* Reset */
> > + msdc_reset_hw(host);
> > +
> > + /* Disable card detection */
> > + sdr_clr_bits(host->base + MSDC_PS, MSDC_PS_CDEN);
> > +
> > + /* Disable and clear all interrupts */
> > + writel(0, host->base + MSDC_INTEN);
> > + val = readl(host->base + MSDC_INT);
> > + writel(val, host->base + MSDC_INT);
> > +
> > + writel(0, host->base + MSDC_PAD_TUNE);
> > + writel(0, host->base + MSDC_IOCON);
> > + sdr_set_field(host->base + MSDC_IOCON, MSDC_IOCON_DDLSEL, 1);
> > + writel(0x403c004f, host->base + MSDC_PATCH_BIT);
> > + sdr_set_field(host->base + MSDC_PATCH_BIT, MSDC_CKGEN_MSDC_DLY_SEL, 1);
> > + writel(0xffff0089, host->base + MSDC_PATCH_BIT1);
> > + /* Configure to enable SDIO mode.
> > + it's must otherwise sdio cmd5 failed */
> > + sdr_set_bits(host->base + SDC_CFG, SDC_CFG_SDIO);
> > +
> > + /* disable detect SDIO device interrupt function */
> > + sdr_clr_bits(host->base + SDC_CFG, SDC_CFG_SDIOIDE);
> > +
> > + /* Configure to default data timeout */
> > + sdr_set_field(host->base + SDC_CFG, SDC_CFG_DTOC, 3);
> > +
> > + dev_dbg(host->dev, "init hardware done!");
> > +}
> > +
> > +static void msdc_deinit_hw(struct msdc_host *host)
> > +{
> > + u32 val;
> > + /* Disable and clear all interrupts */
> > + writel(0, host->base + MSDC_INTEN);
> > +
> > + val = readl(host->base + MSDC_INT);
> > + writel(val, host->base + MSDC_INT);
> > +}
> > +
> > +/* init gpd and bd list in msdc_drv_probe */
> > +static void msdc_init_gpd_bd(struct msdc_host *host, struct msdc_dma *dma)
> > +{
> > + struct mt_gpdma_desc *gpd = dma->gpd;
> > + struct mt_bdma_desc *bd = dma->bd;
> > + int i;
> > +
> > + memset(gpd, 0, sizeof(struct mt_gpdma_desc));
> > + gpd->next = 0; /* only one gpd */
> > +
> > + gpd->first_u32 |= GPDMA_DESC_BDP; /* hwo, cs, bd pointer */
> > + gpd->ptr = (u32)dma->bd_addr; /* physical address */
> > +
> > + memset(bd, 0, sizeof(struct mt_bdma_desc) * MAX_BD_NUM);
> > +
> > + for (i = 0; i < (MAX_BD_NUM - 1); i++)
> > + bd[i].next = (u32)dma->bd_addr + sizeof(*bd) * (i + 1);
> > +}
> > +
> > +static int timing_is_uhs(struct mmc_ios *ios)
> > +{
> > + if (ios->signal_voltage != MMC_SIGNAL_VOLTAGE_330)
> > + return 1;
> > +
> > + return 0;
> > +}
> > +
> > +static void msdc_ops_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
> > +{
> > + struct msdc_host *host = mmc_priv(mmc);
> > + int ret;
> > + u32 ddr = 0;
> > +
> > + if (ios->timing == MMC_TIMING_UHS_DDR50 ||
> > + ios->timing == MMC_TIMING_MMC_DDR52)
> > + ddr = 1;
> > +
> > + msdc_set_buswidth(host, ios->bus_width);
> > +
> > + /* Suspend/Resume will do power off/on */
> > + switch (ios->power_mode) {
> > + case MMC_POWER_UP:
> > + msdc_init_hw(host);
> > + if (!IS_ERR(mmc->supply.vmmc)) {
> > + ret = mmc_regulator_set_ocr(mmc, mmc->supply.vmmc,
> > + ios->vdd);
> > + if (ret) {
> > + dev_err(host->dev, "Failed to set vmmc power!\n");
> > + return;
> > + }
> > + }
> > + break;
> > + case MMC_POWER_ON:
> > + if (!IS_ERR(mmc->supply.vqmmc) && !host->vqmmc_enabled) {
> > + ret = regulator_enable(mmc->supply.vqmmc);
> > + if (ret)
> > + dev_err(host->dev, "Failed to set vqmmc power!\n");
> > + else
> > + host->vqmmc_enabled = true;
> > + }
> > + break;
> > + case MMC_POWER_OFF:
> > + if (!IS_ERR(mmc->supply.vmmc))
> > + mmc_regulator_set_ocr(mmc, mmc->supply.vmmc, 0);
> > +
> > + if (!IS_ERR(mmc->supply.vqmmc) && host->vqmmc_enabled) {
> > + regulator_disable(mmc->supply.vqmmc);
> > + host->vqmmc_enabled = false;
> > + }
> > + break;
> > + default:
> > + break;
> > + }
> > +
> > + /* Apply different pinctrl settings for different timing */
>
> The code to change pinctrl state should be moved into msdc_ops_switch_volt().
>
> Moreover, you don't need a function like timing_is_uhs(). Instead
> check the value of ios->signal_voltage, as what msdc_ops_switch_volt()
> already does.
Ok, will fix at next revision,
>
> > + if (timing_is_uhs(ios))
> > + pinctrl_select_state(host->pinctrl, host->pins_uhs);
> > + else
> > + pinctrl_select_state(host->pinctrl, host->pins_default);
> > +
> > + if (host->mclk != ios->clock || host->ddr != ddr)
> > + msdc_set_mclk(host, ddr, ios->clock);
> > +}
> > +
> > +static struct mmc_host_ops mt_msdc_ops = {
> > + .post_req = msdc_post_req,
> > + .pre_req = msdc_pre_req,
> > + .request = msdc_ops_request,
> > + .set_ios = msdc_ops_set_ios,
> > + .start_signal_voltage_switch = msdc_ops_switch_volt,
> > + .card_busy = msdc_card_busy,
> > +};
> > +
> > +static int msdc_drv_probe(struct platform_device *pdev)
> > +{
> > + struct mmc_host *mmc;
> > + struct msdc_host *host;
> > + struct resource *res;
> > + int ret;
> > +
> > + if (!pdev->dev.of_node) {
> > + dev_err(&pdev->dev, "No DT found\n");
> > + return -EINVAL;
> > + }
> > + /* Allocate MMC host for this device */
> > + mmc = mmc_alloc_host(sizeof(struct msdc_host), &pdev->dev);
> > + if (!mmc)
> > + return -ENOMEM;
> > +
> > + host = mmc_priv(mmc);
> > + ret = mmc_of_parse(mmc);
> > + if (ret)
> > + goto host_free;
> > +
> > + res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> > + host->base = devm_ioremap_resource(&pdev->dev, res);
> > + if (IS_ERR(host->base)) {
> > + ret = PTR_ERR(host->base);
> > + goto host_free;
> > + }
> > +
> > + ret = mmc_regulator_get_supply(mmc);
> > + if (ret == -EPROBE_DEFER)
> > + goto host_free;
> > +
> > + host->src_clk = devm_clk_get(&pdev->dev, "source");
> > + if (IS_ERR(host->src_clk)) {
> > + ret = PTR_ERR(host->src_clk);
> > + goto host_free;
> > + }
> > +
> > + host->h_clk = devm_clk_get(&pdev->dev, "hclk");
> > + if (IS_ERR(host->h_clk)) {
> > + /* host->h_clk is optional, Only for MSDC0/3 at MT8173 */
> > + dev_dbg(&pdev->dev,
> > + "Invalied hclk from the device tree!\n");
> > + }
> > +
> > + host->irq = platform_get_irq(pdev, 0);
> > + if (host->irq < 0) {
> > + ret = -EINVAL;
> > + goto host_free;
> > + }
> > +
> > + host->pinctrl = devm_pinctrl_get(&pdev->dev);
> > + if (IS_ERR(host->pinctrl)) {
> > + ret = PTR_ERR(host->pinctrl);
> > + dev_err(&pdev->dev, "Cannot find pinctrl!\n");
> > + goto host_free;
> > + }
> > +
> > + host->pins_default = pinctrl_lookup_state(host->pinctrl, "default");
> > + if (IS_ERR(host->pins_default)) {
> > + ret = PTR_ERR(host->pins_default);
> > + dev_err(&pdev->dev, "Cannot find pinctrl default!\n");
> > + goto host_free;
> > + }
> > +
> > + host->pins_uhs = pinctrl_lookup_state(host->pinctrl, "state_uhs");
> > + if (IS_ERR(host->pins_uhs)) {
> > + ret = PTR_ERR(host->pins_uhs);
> > + dev_err(&pdev->dev, "Cannot find pinctrl uhs!\n");
> > + goto host_free;
> > + }
> > +
> > + host->dev = &pdev->dev;
> > + host->mmc = mmc;
> > + host->hclk = clk_get_rate(host->src_clk);
> > + /* Set host parameters to mmc */
> > + mmc->ops = &mt_msdc_ops;
> > + mmc->f_min = host->hclk / (4 * 255);
> > +
> > + mmc->caps |= MMC_CAP_ERASE | MMC_CAP_CMD23;
> > + /* MMC core transfer sizes tunable parameters */
> > + mmc->max_segs = MAX_BD_NUM;
> > + mmc->max_seg_size = (64 * 1024 - 512);
> > + mmc->max_blk_size = 2048;
> > + mmc->max_req_size = 512 * 1024;
> > + mmc->max_blk_count = mmc->max_req_size;
> > +
> > + host->timeout_clks = 3 * 1048576;
> > + host->dma.gpd = dma_alloc_coherent(&pdev->dev,
> > + sizeof(struct mt_gpdma_desc),
> > + &host->dma.gpd_addr, GFP_KERNEL);
> > + host->dma.bd = dma_alloc_coherent(&pdev->dev,
> > + MAX_BD_NUM * sizeof(struct mt_bdma_desc),
> > + &host->dma.bd_addr, GFP_KERNEL);
> > + if ((!host->dma.gpd) || (!host->dma.bd)) {
> > + ret = -ENOMEM;
> > + goto release_mem;
> > + }
> > + msdc_init_gpd_bd(host, &host->dma);
> > + INIT_DELAYED_WORK(&host->req_timeout, msdc_request_timeout);
> > + spin_lock_init(&host->lock);
> > +
> > + platform_set_drvdata(pdev, mmc);
> > + msdc_ungate_clock(host);
> > +
> > + ret = devm_request_irq(&pdev->dev, (unsigned int) host->irq, msdc_irq,
> > + IRQF_TRIGGER_LOW | IRQF_ONESHOT, pdev->name, host);
> > + if (ret)
> > + goto release;
> > +
> > + ret = mmc_add_host(mmc);
> > + if (ret)
> > + goto release;
> > +
> > + return 0;
> > +
> > +release:
> > + platform_set_drvdata(pdev, NULL);
> > + msdc_deinit_hw(host);
> > + msdc_gate_clock(host);
> > +release_mem:
> > + if (host->dma.gpd)
> > + dma_free_coherent(&pdev->dev,
> > + sizeof(struct mt_gpdma_desc),
> > + host->dma.gpd, host->dma.gpd_addr);
> > + if (host->dma.bd)
> > + dma_free_coherent(&pdev->dev,
> > + MAX_BD_NUM * sizeof(struct mt_bdma_desc),
> > + host->dma.bd, host->dma.bd_addr);
> > +host_free:
> > + mmc_free_host(mmc);
> > +
> > + return ret;
> > +}
> > +
> > +static int msdc_drv_remove(struct platform_device *pdev)
> > +{
> > + struct mmc_host *mmc;
> > + struct msdc_host *host;
> > +
> > + mmc = platform_get_drvdata(pdev);
> > + host = mmc_priv(mmc);
> > +
> > + platform_set_drvdata(pdev, NULL);
> > + mmc_remove_host(host->mmc);
> > + msdc_deinit_hw(host);
> > +
>
> You should gate the clock(s) via the clock API here as well.
> OK, will fix at next revision,
> > + dma_free_coherent(&pdev->dev,
> > + sizeof(struct mt_gpdma_desc),
> > + host->dma.gpd, host->dma.gpd_addr);
> > + dma_free_coherent(&pdev->dev, MAX_BD_NUM * sizeof(struct mt_bdma_desc),
> > + host->dma.bd, host->dma.bd_addr);
> > +
> > + mmc_free_host(host->mmc);
> > +
> > + return 0;
> > +}
> > +
> > +static const struct of_device_id msdc_of_ids[] = {
> > + { .compatible = "mediatek,mt8135-mmc", },
> > + {}
> > +};
> > +
> > +static struct platform_driver mt_msdc_driver = {
> > + .probe = msdc_drv_probe,
> > + .remove = msdc_drv_remove,
> > + .driver = {
> > + .name = "mtk-msdc",
> > + .of_match_table = msdc_of_ids,
> > + },
> > +};
> > +
> > +module_platform_driver(mt_msdc_driver);
> > +MODULE_LICENSE("GPL v2");
> > +MODULE_DESCRIPTION("MediaTek SD/MMC Card Driver");
> > --
> > 1.8.1.1.dirty
> >
>
> Kind regards
> Uffe
More information about the linux-arm-kernel
mailing list