[PATCH 5/5] clk: mediatek: Add USB clock support in MT8173 APMIXEDSYS

James Liao jamesjj.liao at mediatek.com
Thu May 21 00:12:56 PDT 2015


Add REF2USB_TX clock support into MT8173 APMIXEDSYS. This clock
is needed by USB 3.0.

Signed-off-by: James Liao <jamesjj.liao at mediatek.com>
---
 drivers/clk/mediatek/clk-mt8173.c      | 120 +++++++++++++++++++++++++++++++++
 drivers/clk/mediatek/clk-pll.c         |   7 +-
 include/dt-bindings/clock/mt8173-clk.h |   7 +-
 3 files changed, 125 insertions(+), 9 deletions(-)

diff --git a/drivers/clk/mediatek/clk-mt8173.c b/drivers/clk/mediatek/clk-mt8173.c
index e2f40ba..105844f 100644
--- a/drivers/clk/mediatek/clk-mt8173.c
+++ b/drivers/clk/mediatek/clk-mt8173.c
@@ -12,6 +12,7 @@
  * GNU General Public License for more details.
  */
 
+#include <linux/delay.h>
 #include <linux/of.h>
 #include <linux/of_address.h>
 #include <linux/slab.h>
@@ -978,6 +979,118 @@ static void __init mtk_pericfg_init(struct device_node *node)
 }
 CLK_OF_DECLARE(mtk_pericfg, "mediatek,mt8173-pericfg", mtk_pericfg_init);
 
+#define REF2USB_TX_EN		BIT(0)
+#define REF2USB_TX_LPF_EN	BIT(1)
+#define REF2USB_TX_OUT_EN	BIT(2)
+#define REF2USB_EN_MASK		(REF2USB_TX_EN | REF2USB_TX_LPF_EN | \
+				 REF2USB_TX_OUT_EN)
+
+struct mtk_ref2usb_tx {
+	struct clk_hw	hw;
+	void __iomem	*base_addr;
+};
+
+static inline struct mtk_ref2usb_tx *to_mtk_ref2usb_tx(struct clk_hw *hw)
+{
+	return container_of(hw, struct mtk_ref2usb_tx, hw);
+}
+
+static int mtk_ref2usb_tx_is_prepared(struct clk_hw *hw)
+{
+	struct mtk_ref2usb_tx *tx = to_mtk_ref2usb_tx(hw);
+
+	return (readl(tx->base_addr) & REF2USB_EN_MASK) == REF2USB_EN_MASK;
+}
+
+static int mtk_ref2usb_tx_prepare(struct clk_hw *hw)
+{
+	struct mtk_ref2usb_tx *tx = to_mtk_ref2usb_tx(hw);
+	u32 val;
+
+	val = readl(tx->base_addr);
+
+	val |= REF2USB_TX_EN;
+	writel(val, tx->base_addr);
+	udelay(100);
+
+	val |= REF2USB_TX_LPF_EN;
+	writel(val, tx->base_addr);
+
+	val |= REF2USB_TX_OUT_EN;
+	writel(val, tx->base_addr);
+
+	return 0;
+}
+
+static void mtk_ref2usb_tx_unprepare(struct clk_hw *hw)
+{
+	struct mtk_ref2usb_tx *tx = to_mtk_ref2usb_tx(hw);
+	u32 val;
+
+	val = readl(tx->base_addr);
+	val &= ~REF2USB_EN_MASK;
+	writel(val, tx->base_addr);
+}
+
+static const struct clk_ops mtk_ref2usb_tx_ops = {
+	.is_prepared	= mtk_ref2usb_tx_is_prepared,
+	.prepare	= mtk_ref2usb_tx_prepare,
+	.unprepare	= mtk_ref2usb_tx_unprepare,
+};
+
+static struct clk *mtk_clk_register_ref2usb_tx(const char *name,
+			void __iomem *reg)
+{
+	struct mtk_ref2usb_tx *tx;
+	struct clk_init_data init = {};
+	struct clk *clk;
+	const char *parent_name = "clk26m";
+
+	tx = kzalloc(sizeof(*tx), GFP_KERNEL);
+	if (!tx)
+		return ERR_PTR(-ENOMEM);
+
+	tx->base_addr = reg;
+	tx->hw.init = &init;
+
+	init.name = name;
+	init.ops = &mtk_ref2usb_tx_ops;
+	init.parent_names = &parent_name;
+	init.num_parents = 1;
+
+	clk = clk_register(NULL, &tx->hw);
+
+	if (IS_ERR(clk)) {
+		pr_err("Failed to register clk %s: %ld\n", name, PTR_ERR(clk));
+		kfree(tx);
+	}
+
+	return clk;
+}
+
+static void __init mtk_clk_register_apmixedsys_special(struct device_node *node,
+			struct clk_onecell_data *clk_data)
+{
+	void __iomem *base;
+	struct clk *clk;
+
+	base = of_iomap(node, 0);
+	if (!base) {
+		pr_err("%s(): ioremap failed\n", __func__);
+		return;
+	}
+
+	clk = mtk_clk_register_ref2usb_tx("ref2usb_tx", base + 0x8);
+
+	if (IS_ERR(clk)) {
+		pr_err("Failed to register clk ref2usb_tx: %ld\n",
+				PTR_ERR(clk));
+		return;
+	}
+
+	clk_data->clks[CLK_APMIXED_REF2USB_TX] = clk;
+}
+
 #define MT8173_PLL_FMAX		(3000UL * MHZ)
 
 #define CON0_MT8173_RST_BAR	BIT(24)
@@ -1020,12 +1133,19 @@ static const struct mtk_pll_data plls[] = {
 static void __init mtk_apmixedsys_init(struct device_node *node)
 {
 	struct clk_onecell_data *clk_data;
+	int r;
 
 	mt8173_pll_clk_data = clk_data = mtk_alloc_clk_data(CLK_APMIXED_NR_CLK);
 	if (!clk_data)
 		return;
 
 	mtk_clk_register_plls(node, plls, ARRAY_SIZE(plls), clk_data);
+	mtk_clk_register_apmixedsys_special(node, clk_data);
+
+	r = of_clk_add_provider(node, of_clk_src_onecell_get, clk_data);
+	if (r)
+		pr_err("%s(): could not register clock provider: %d\n",
+			__func__, r);
 
 	mtk_clk_enable_critical();
 }
diff --git a/drivers/clk/mediatek/clk-pll.c b/drivers/clk/mediatek/clk-pll.c
index 44409e9..813f0c7 100644
--- a/drivers/clk/mediatek/clk-pll.c
+++ b/drivers/clk/mediatek/clk-pll.c
@@ -302,7 +302,7 @@ void __init mtk_clk_register_plls(struct device_node *node,
 		const struct mtk_pll_data *plls, int num_plls, struct clk_onecell_data *clk_data)
 {
 	void __iomem *base;
-	int r, i;
+	int i;
 	struct clk *clk;
 
 	base = of_iomap(node, 0);
@@ -324,9 +324,4 @@ void __init mtk_clk_register_plls(struct device_node *node,
 
 		clk_data->clks[pll->id] = clk;
 	}
-
-	r = of_clk_add_provider(node, of_clk_src_onecell_get, clk_data);
-	if (r)
-		pr_err("%s(): could not register clock provider: %d\n",
-			__func__, r);
 }
diff --git a/include/dt-bindings/clock/mt8173-clk.h b/include/dt-bindings/clock/mt8173-clk.h
index 94977e6..7b7c555 100644
--- a/include/dt-bindings/clock/mt8173-clk.h
+++ b/include/dt-bindings/clock/mt8173-clk.h
@@ -158,8 +158,8 @@
 
 /* APMIXED_SYS */
 
-#define CLK_APMIXED_ARMCA15PLL	1
-#define CLK_APMIXED_ARMCA7PLL	2
+#define CLK_APMIXED_ARMCA15PLL		1
+#define CLK_APMIXED_ARMCA7PLL		2
 #define CLK_APMIXED_MAINPLL		3
 #define CLK_APMIXED_UNIVPLL		4
 #define CLK_APMIXED_MMPLL		5
@@ -172,7 +172,8 @@
 #define CLK_APMIXED_APLL2		12
 #define CLK_APMIXED_LVDSPLL		13
 #define CLK_APMIXED_MSDCPLL2		14
-#define CLK_APMIXED_NR_CLK		15
+#define CLK_APMIXED_REF2USB_TX		15
+#define CLK_APMIXED_NR_CLK		16
 
 /* INFRA_SYS */
 
-- 
1.8.1.1.dirty




More information about the linux-arm-kernel mailing list