[PATCH soc] ARM: use ARM_SINGLE_ARMV7M for ARMv7-M platforms
Stefan Agner
stefan at agner.ch
Wed May 20 15:35:44 PDT 2015
Use the new config symbol ARM_SINGLE_ARMV7M which groups config
symbols used by modern ARMv7-M platforms. This allows supporting
multiple ARMv7-M platforms in one kernel image. However, a common
kernel image requires the combined platforms to share the same
main memory layout to be bootable.
Acked-by: Uwe Kleine-König <u.kleine-koenig at pengutronix.de>
Signed-off-by: Stefan Agner <stefan at agner.ch>
---
Since this is essentially only a shift of config symbols, it
should not change runtime behavior, at least when selecting
only one platform.
Uwe, this is essentially the same I had in my patchset, just
converting the other platforms too. I was bold and added your
Ack anyway...
Joachim, Maxime, I test compiled with your defconfigs, compiled
fine on my machine.
arch/arm/Kconfig | 86 ++++++++++++++++++--------------------------------
arch/arm/Kconfig.debug | 5 ++-
2 files changed, 32 insertions(+), 59 deletions(-)
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 75920ed..9b777e3 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -334,6 +334,7 @@ config ARM_SINGLE_ARMV7M
depends on !MMU
select ARCH_WANT_OPTIONAL_GPIOLIB
select ARM_NVIC
+ select AUTO_ZRELADDR
select CLKSRC_OF
select COMMON_CLK
select CPU_V7M
@@ -411,24 +412,6 @@ config ARCH_EBSA110
Ethernet interface, two PCMCIA sockets, two serial ports and a
parallel port.
-config ARCH_EFM32
- bool "Energy Micro efm32"
- depends on !MMU
- select ARCH_REQUIRE_GPIOLIB
- select ARM_NVIC
- select AUTO_ZRELADDR
- select CLKSRC_OF
- select COMMON_CLK
- select CPU_V7M
- select GENERIC_CLOCKEVENTS
- select NO_DMA
- select NO_IOPORT_MAP
- select SPARSE_IRQ
- select USE_OF
- help
- Support for Energy Micro's (now Silicon Labs) efm32 Giant Gecko
- processors.
-
config ARCH_EP93XX
bool "EP93xx-based"
select ARCH_HAS_HOLES_MEMORYMODEL
@@ -599,26 +582,6 @@ config ARCH_W90X900
<http://www.nuvoton.com/hq/enu/ProductAndSales/ProductLines/
ConsumerElectronicsIC/ARMMicrocontroller/ARMMicrocontroller>
-config ARCH_LPC18XX
- bool "NXP LPC18xx/LPC43xx"
- depends on !MMU
- select ARCH_HAS_RESET_CONTROLLER
- select ARCH_REQUIRE_GPIOLIB
- select ARM_AMBA
- select ARM_NVIC
- select AUTO_ZRELADDR
- select CLKSRC_LPC32XX
- select COMMON_CLK
- select CPU_V7M
- select GENERIC_CLOCKEVENTS
- select NO_IOPORT_MAP
- select PINCTRL
- select SPARSE_IRQ
- select USE_OF
- help
- Support for NXP's LPC18xx Cortex-M3 and LPC43xx Cortex-M4
- high performance microcontrollers.
-
config ARCH_LPC32XX
bool "NXP LPC32XX"
select ARCH_REQUIRE_GPIOLIB
@@ -791,24 +754,6 @@ config ARCH_OMAP1
help
Support for older TI OMAP1 (omap7xx, omap15xx or omap16xx)
-config ARCH_STM32
- bool "STMicrolectronics STM32"
- depends on !MMU
- select ARCH_HAS_RESET_CONTROLLER
- select ARM_NVIC
- select ARMV7M_SYSTICK
- select AUTO_ZRELADDR
- select CLKSRC_OF
- select COMMON_CLK
- select CPU_V7M
- select GENERIC_CLOCKEVENTS
- select NO_IOPORT_MAP
- select RESET_CONTROLLER
- select SPARSE_IRQ
- select USE_OF
- help
- Support for STMicroelectronics STM32 processors.
-
endchoice
menu "Multiple platform selection"
@@ -1006,6 +951,35 @@ source "arch/arm/mach-zx/Kconfig"
source "arch/arm/mach-zynq/Kconfig"
+# ARMv7-M architecture
+config ARCH_EFM32
+ bool "Energy Micro efm32"
+ depends on ARM_SINGLE_ARMV7M
+ select ARCH_REQUIRE_GPIOLIB
+ help
+ Support for Energy Micro's (now Silicon Labs) efm32 Giant Gecko
+ processors.
+
+config ARCH_LPC18XX
+ bool "NXP LPC18xx/LPC43xx"
+ depends on ARM_SINGLE_ARMV7M
+ select ARCH_HAS_RESET_CONTROLLER
+ select ARM_AMBA
+ select CLKSRC_LPC32XX
+ select PINCTRL
+ help
+ Support for NXP's LPC18xx Cortex-M3 and LPC43xx Cortex-M4
+ high performance microcontrollers.
+
+config ARCH_STM32
+ bool "STMicrolectronics STM32"
+ depends on ARM_SINGLE_ARMV7M
+ select ARCH_HAS_RESET_CONTROLLER
+ select ARMV7M_SYSTICK
+ select RESET_CONTROLLER
+ help
+ Support for STMicroelectronics STM32 processors.
+
# Definitions to make life easier
config ARCH_ACORN
bool
diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
index 9553759..e27fd3f 100644
--- a/arch/arm/Kconfig.debug
+++ b/arch/arm/Kconfig.debug
@@ -1596,9 +1596,8 @@ config DEBUG_UNCOMPRESS
config UNCOMPRESS_INCLUDE
string
default "debug/uncompress.h" if ARCH_MULTIPLATFORM || ARCH_MSM || \
- PLAT_SAMSUNG || ARCH_EFM32 || \
- ARCH_SHMOBILE_LEGACY || \
- ARCH_LPC18XX || ARM_SINGLE_ARMV7M
+ PLAT_SAMSUNG || ARM_SINGLE_ARMV7M || \
+ ARCH_SHMOBILE_LEGACY
default "mach/uncompress.h"
config EARLY_PRINTK
--
2.4.1
More information about the linux-arm-kernel
mailing list