[PATCHv5 2/5] ARM: dts: Odroid-XU3 Enable TMU at Exynos5422 base
Anand Moon
linux.amoon at gmail.com
Wed May 20 07:59:20 PDT 2015
On 20 May 2015 at 08:57, Dongjin Kim <tobetter at gmail.com> wrote:
> Hello Kryzsztof,
>
> Are you able to check if TMU is under VDDI power domain from Exynos5422
> datasheet?
> If it is, XU3 use BUCK3 for TMU and more internal blocks.
>
> Thank you,
> Dongjin.
>
> On Tue, May 19, 2015 at 4:42 PM, Krzysztof Kozlowski
> <k.kozlowski at samsung.com> wrote:
>>
>> 2015-05-19 16:28 GMT+09:00 Anand Moon <linux.amoon at gmail.com>:
>> > On 15 May 2015 at 05:42, Krzysztof Kozlowski <k.kozlowski at samsung.com>
>> > wrote:
>> >> 2015-05-15 1:16 GMT+09:00 Anand Moon <linux.amoon at gmail.com>:
>> >>> On 13 May 2015 at 14:02, Krzysztof Kozlowski <k.kozlowski at samsung.com>
>> >>> wrote:
>> >>>> 2015-05-13 17:21 GMT+09:00 Anand Moon <linux.amoon at gmail.com>:
>> >>>>> On 13 May 2015 at 12:51, Krzysztof Kozlowski
>> >>>>> <k.kozlowski at samsung.com> wrote:
>> >>>>>> 2015-05-13 15:36 GMT+09:00 Anand Moon <linux.amoon at gmail.com>:
>> >>>>>>> This changes enables TMU IP block on the Exynos5422 Odroid-XU3
>> >>>>>>> device.
>> >>>>>>>
>> >>>>>>> Tested-by: Markus Reichl <m.reichl at fivetechno.de>
>> >>>>>>> Acked-by: Lukasz Majewski <l.majewski at samsung.com>
>> >>>>>>> Signed-off-by: Anand Moon <linux.amoon at gmail.com>
>> >>>>>>> ---
>> >>>>>>> arch/arm/boot/dts/exynos5422-odroidxu3.dts | 25
>> >>>>>>> +++++++++++++++++++++++++
>> >>>>>>> 1 file changed, 25 insertions(+)
>> >>>>>>>
>> >>>>>>> diff --git a/arch/arm/boot/dts/exynos5422-odroidxu3.dts
>> >>>>>>> b/arch/arm/boot/dts/exynos5422-odroidxu3.dts
>> >>>>>>> index 9446e28..cd78816 100644
>> >>>>>>> --- a/arch/arm/boot/dts/exynos5422-odroidxu3.dts
>> >>>>>>> +++ b/arch/arm/boot/dts/exynos5422-odroidxu3.dts
>> >>>>>>> @@ -319,6 +319,31 @@
>> >>>>>>> #cooling-cells = <2>;
>> >>>>>>> cooling-levels = <0 130 170 230>;
>> >>>>>>> };
>> >>>>>>> +
>> >>>>>>> + tmu at 10060000 {
>> >>>>>>
>> >>>>>> Here and for other overrides please use label notation, like:
>> >>>>>>
>> >>>>>> &tmu_cpu0 {
>> >>>>>> ...
>> >>>>>> };
>> >>>>>>
>> >>>>>>> + vtmu-supply = <&ldo10_reg>;
>> >>>>>>
>> >>>>>> I am curious, how did you find that LDO10 supplies TMU unit?
>> >>>>>>
>> >>>>>> Best regards,
>> >>>>>> Krzysztof
>> >>>>>
>> >>>>> Hi Krzysztof,
>> >>>>>
>> >>>>> I have re-base my work on earlier Lukasz Majewski patches.
>> >>>>>
>> >>>>> https://patchwork.kernel.org/patch/5693201/
>> >>>>
>> >>>> NAK.
>> >>>> I am sorry, but this is not sufficient explanation. Actually such
>> >>>> explanation could mean that you did just blindly copied everything
>> >>>> instead of developing it.
>> >>>>
>> >>>> You cannot use some regulator here just because some Exynos4 boards
>> >>>> use it. You have to be sure that this regulator supplies this part of
>> >>>> SoC or device.
>> >>>
>> >>> Hi Krzysztof,
>> >>>
>> >>> After going through the schematics, I came to understanding that their
>> >>> is
>> >>> missing regulator related to TEMP SE in the exynos5422-odroidxu3.dts.
>> >>>
>> >>> Below is the schematic of the board.
>> >>>
>> >>> http://dn.odroid.com/5422/ODROID-XU3/Schematics/XU3_MAIN_REV0.2.PDF
>> >>>
>> >>> ldo18_reg: LDO18 {
>> >>> regulator-name = "vdd_ldo18";
>> >>> regulator-min-microvolt =
>> >>> <1800000>;
>> >>> regulator-max-microvolt =
>> >>> <1800000>;
>> >>> regulator-always-on;
>> >>> };
>> >>
>> >> The output of LDO18 goes to VDD_EMMC_1V8. This is not regulator for
>> >> TMU.
>> >>
>> >> I think the schematics are missing some of details but it can be
>> >> deducted that:
>> >> 1. TEMP SE is supplied by VDD18_TS power domain. It consists of 5
>> >> pairs of pins (XTSTEST_OUT[0-4], XTSEXT_RES[0-4]).
>> >> 2. The VDD18_TS01, VDD18_TS23 and VDD18_TS4 are wired to theL DO7 of
>> >> S2MPS11 PMIC.
>> >> 3. I confirmed with the Exynos5422 datasheet that these
>> >> VDD18_TS{01,23,4} supply the XTSTEST pins (OUT and RES).
>> >>
>> >> So the LDO7 it is... but before using it there is a caveat. The LDO7
>> >> is also connected to VDD of MIPI, HDMI and few more. So when you use
>> >> this regulator in TMU it may be turned off by TMU driver (e.g. during
>> >> unbind). In such case these other blocks also should be tested and
>> >> checked whether they take this regulator and enable it.
>> >
>> > hi Krzysztof,
>> >
>> > I tried to use the LDO7 regulator for TMU but it failed to register.
>> >
>> > [ 3.231329] ina2xx 0-0045: power monitor ina231 (Rshunt = 10000 uOhm)
>> > [ 3.237691] thermal thermal_zone0: failed to read out thermal zone
>> > (-22)
>> > [ 3.243033] exynos-tmu 10060000.tmu: Looking up vtmu-supply from
>> > device tree
>> > [ 3.243936] thermal thermal_zone1: failed to read out thermal zone
>> > (-22)
>> > [ 3.249791] exynos-tmu 10064000.tmu: Looking up vtmu-supply from
>> > device tree
>> > [ 3.250677] thermal thermal_zone2: failed to read out thermal zone
>> > (-22)
>> > [ 3.256410] exynos-tmu 10068000.tmu: Looking up vtmu-supply from
>> > device tree
>> > [ 3.257345] thermal thermal_zone3: failed to read out thermal zone
>> > (-22)
>> > [ 3.263050] exynos-tmu 1006c000.tmu: Looking up vtmu-supply from
>> > device tree
>> > [ 3.263984] thermal thermal_zone4: failed to read out thermal zone
>> > (-22)
>> > [ 3.269769] exynos-tmu 100a0000.tmu: Looking up vtmu-supply from
>> > device tree
>> > [ 3.270363] usb 5-1: New USB device found, idVendor=0424,
>> > idProduct=9514
>> > [ 3.276389] usb 5-1: New USB device strings: Mfr=0, Product=0,
>> > SerialNumber=0
>>
>> Indeed.
>>
Hi Krzysztof/Dongjin
BUCK3 is option for TMU as suggested by Dongjin
Earlier I have some missing CONFIG option's hence It was not working.
Now its registering with TMU.
Bellow is the output device tree.
root at odroidxu3: cd /sys/firmware/devicetree/base/
root at odroidxu3:/sys/firmware/devicetree/base# cat tmu at 10060000/status
okay
root at odroidxu3:/sys/firmware/devicetree/base#
root at odroidxu3:/sys/firmware/devicetree/base# cat tmu at 10064000/status
okay
root at odroidxu3:/sys/firmware/devicetree/base# cat tmu at 10068000/status
okay
root at odroidxu3:/sys/firmware/devicetree/base# cat tmu at 1006c000/status
okay
root at odroidxu3:/sys/firmware/devicetree/base# cat tmu at 100a0000/status
okay
root at odroidxu3:/sys/firmware/devicetree/base#
-Anand Moon
>> Best regards,
>> Krzysztof
>>
>> _______________________________________________
>> linux-arm-kernel mailing list
>> linux-arm-kernel at lists.infradead.org
>> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
>
>
More information about the linux-arm-kernel
mailing list