[PATCH v10 0/4] Add Freescale i.mx7d support

[Frank.Li at freescale.com]

From: Frank Li <Frank.Li at freescale.com>

Add basic support for chip imx7d.
 - MSL
 - Clock support. All clock enabled.
 - pinctrl support
 - SD Card support

Change from v9 to 10
 - Change IMX_PLLV3_ENET_MX7 to IMX_PLLV3_ENET_IMX7
 - Change to IMX7_ENET_PLL_POWER
 - sort makefile alphabetically
 - change to Hz.
 - Remove clks_init_on
 - Change comment to 80 column

Change from v8 to v9
 - seperate clk-pllv3.c change to new patch
 - clk-imx7: Change to IMX7D_CLK_END
 - clk-imx7: remove BM_PLL_ENABLE and BM_PLL_BYPASS
 - clk-pllv3: remove  IMX_PLLV3_SYSV2
 - clk-imx7: Remove  imx_clk_gate_flags
 - dts:remove clock-frequency = <100000>
 - dts: add reg=<3>;
 - remove _1 of pinctrl_hog_1
 - move iomux to bottom
 - Add imx7d description in imx7d.dtsi

Change from v7 to v8
 - exclude patchs already accepted.
 - Remove SOC_IMX7
 - Remove static map
 - Remove #include <linux/phy.h>
 - Remove .restart        = mxc_restart,
 - Remove mx7d.h
 - consistent indetation in imx7d.dtsi
 - Change document remove  "ipp_di0" and "ipp_di1"
 - Remove GPC because needn't it now, will added back at SMP enable patch
 - Remove imx21-uart compatible string
 - use i.mx6sx timer compatible string, so remove time.c change
 - correct typo imx6sx
 - dt file add cpu1

Change from v6 to v7
 - Move clk to driver/clk/imx
 - Remove iomux-lpsr part
 - Remove parents clocks node in imx7d.dtsi

Change from v5 to v6
 - dual license for dts
 - fix typo statue
 - Remove smp_operations
 - Remove GPT check cpu_is_mx7() by use old compatible mode
 - Remove dts arch_timer part, which not used in this patch series
 - correct GIC reg map

Change from v4 to v5
 - Remove imx7d_map_io()
 - Remove  clk_register_clkdev(clks[IMX7D_GPT1_ROOT_CLK], "ipg", "imx-gpt.0");
 - Remove  clk_register_clkdev(clks[IMX7D_GPT_3M_CLK], "gpt_3m", "imx-gpt.0");
 - Add comment about enable all clock
 - Add Type IMX_PLLV3_ENET_IMX7 and remove cpu_is_imx7d()

Change from v3 to v4
 - Fixed the problem review by Russel king
   Remove __mxc_arch_type
   Remove MXC_ARCH_CA7
   use new smp_operation for ca7 platform
 - imx7d.dtsi remove unecessary part for bring up
 - imx7d-sdb.dsi, just enable uart i2c and sd card
 - Add device tree binding document for timer, clock and pinctrl

Change from v2 to v3
  - remove unsupport part in imx7d-sdb.dtb

Change from V1 to V2:
  - split patch1 to three small one to avoid 100k maillist limitation.
  - fix imx7d.dtsi code style problem

Frank Li (4):
  ARM: clk: imx: update pllv3 to support imx7
  ARM: imx: add imx7d clk tree support
  ARM: dts: add imx7d soc dtsi file
  ARM: dts: add imx7d-sdb support

 arch/arm/boot/dts/Makefile              |   2 +
 arch/arm/boot/dts/imx7d-sdb.dts         | 408 +++++++++++++++
 arch/arm/boot/dts/imx7d.dtsi            | 486 ++++++++++++++++++
 drivers/clk/imx/Makefile                |   1 +
 drivers/clk/imx/clk-imx7d.c             | 860 ++++++++++++++++++++++++++++++++
 drivers/clk/imx/clk-pllv3.c             |   9 +-
 drivers/clk/imx/clk.h                   |   1 +
 include/dt-bindings/clock/imx7d-clock.h | 450 +++++++++++++++++
 8 files changed, 2216 insertions(+), 1 deletion(-)
 create mode 100644 arch/arm/boot/dts/imx7d-sdb.dts
 create mode 100644 arch/arm/boot/dts/imx7d.dtsi
 create mode 100644 drivers/clk/imx/clk-imx7d.c
 create mode 100644 include/dt-bindings/clock/imx7d-clock.h

-- 
1.9.1