[PATCH v6 01/25] arm: dma-mapping: add support for creating reserved mappings in iova space

[Marek Szyprowski]

Hello,

On 2015-05-05 00:12, Rob Herring wrote:
> On Mon, May 4, 2015 at 3:15 AM, Marek Szyprowski
> <m.szyprowski at samsung.com> wrote:
>> Some devices (like frame buffers) are enabled by bootloader and configured
>> to perform DMA operations automatically (like displaying boot logo or splash
>> screen). Such devices operate and perform DMA operation usually until the
>> proper driver for them is loaded and probed. However before that happens,
>> system usually loads IOMMU drivers and configures dma parameters for each
>> device. When such initial configuration is created and enabled, it usually
>> contains empty translation rules betweem IO address space and physical
>> memory, because no buffers nor memory regions have been requested by the
>> respective driver.
>>
>> This patch adds support for "iommu-reserved-mapping", which can be used
>> to provide definitions for mappings that need to be created on system
>> boot to let such devices (enabled by bootloader) to operate properly
>> until respective driver is probed.
>>
>> Signed-off-by: Marek Szyprowski <m.szyprowski at samsung.com>
>> ---
>>   Documentation/devicetree/bindings/iommu/iommu.txt |  44 +++++++++
>>   arch/arm/mm/dma-mapping.c                         | 112 ++++++++++++++++++++++
>>   2 files changed, 156 insertions(+)
>>
>> diff --git a/Documentation/devicetree/bindings/iommu/iommu.txt b/Documentation/devicetree/bindings/iommu/iommu.txt
>> index 5a8b4624defc..fd54e6b597f0 100644
>> --- a/Documentation/devicetree/bindings/iommu/iommu.txt
>> +++ b/Documentation/devicetree/bindings/iommu/iommu.txt
>> @@ -86,6 +86,35 @@ have a means to turn off translation. But it is invalid in such cases to
>>   disable the IOMMU's device tree node in the first place because it would
>>   prevent any driver from properly setting up the translations.
>>
>> +Optional properties:
>> +--------------------
>> +- iommu-reserved-mapping: A list of entries describing additional
>> +  reserved mapping, that will be inserted to the default IO address space
>> +  created for given master device. Each entry consist of IO address,
>> +  physical memory address and size of the region.
>> +
>> +Some devices (like frame buffers) are enabled by bootloader and configured
>> +to perform DMA operations automatically (like displaying boot logo or splash
>> +screen). Such devices operate and perform DMA operation usually until the
>> +proper driver for them is loaded and probed. However before that happens,
>> +system usually loads IOMMU drivers and configures dma parameters for each
> s/dma/DMA/
>
>> +device. When such initial configuration is created and enabled, it usually
>> +contains empty translation rules betweem IO address space and physical
> s/betweem/between/
>
>> +memory, because no buffers nor memory regions have been requested by the
>> +respective driver.
>> +
>> +To avoid IOMMU page fault, one can provide "iommu-reserved-mapping"
>> +property, which defines all memory regions which must be mapped to IO
>> +address space to boot properly when device has been enabled by the
>> +bootloader. More than one region can be defined for given master device.
>> +Each region is defined by the following triplet: first entry is IO
>> +address (encoded in "address" cells), second is base physical memory
>> +address for this regions (also encoded in "address" cells) and the last
>> +is size of the region (encoded in "size" cells). To ensure that that
>> +given master device will not trigger page fault after enabling IOMMU,
>> +one should define identity mapping between physical memory and IO
>> +address space for the range of addresses accessed by the device.
>> +
>>
>>   Notes:
>>   ======
>> @@ -113,6 +142,21 @@ Single-master IOMMU:
>>                  iommus = <&{/iommu}>;
>>          };
>>
>> +
>> +Single-master IOMMU, which has been left enabled by bootloader:
>> +---------------------------------------------------------------
>> +
>> +       iommu {
>> +               #iommu-cells = <0>;
>> +       };
>> +
>> +       master {
>> +               iommus = <&{/iommu}>;
>> +               /* bootloader configures framebuffer at 0x40000000 (32MiB)
>> +               iommu-reserved-mapping = <0x40000000 0x40000000 0x2000000>;
> Is there not an ordering problem if kernel initializes the IOMMU
> before parsing this for each master? I would think the IOMMU driver
> needs to find all of these mappings and cleanly switch the page tables
> with the new reserved mapping.

The proper ordering is guaranteed by arm_get_iommu_dma_map_ops function, 
which first
created iommu domain for given master device, then scans for reserved 
regions and
adds them to the given domains. Only then it attaches such domain to the 
iommu
driver.

Best regards
-- 
Marek Szyprowski, PhD
Samsung R&D Institute Poland