[RFC v2 PATCH 0/6] MT8173 IOMMU SUPPORT
Yong Wu
yong.wu at mediatek.com
Fri May 15 02:43:23 PDT 2015
This patch adds support for m4u(Multimedia Memory Management Unit),
Currently it only support the m4u with 2 levels of page table on mt8173.
It is based on Robin Murphy's arm64: IOMMU-backed DMA mapping[1].
Please check the hardware block diagram of Mediatek IOMMU.
EMI (External Memory Interface)
|
m4u (Multimedia Memory Management Unit)
|
smi (Smart Multimedia Interface)
|
+---------------+-------
| |
| |
vdec larb disp larb ... SoCs have different local arbiter(larb).
| |
| |
+----+----+ +-----+-----+
| | | | | | ...
| | | | | | ...
| | | | | | ...
MC PP VLD OVL0 RDMA0 WDMA0 ... There are different ports in each larb.
Normally we specify a local arbiter(larb) for each multimedia hardware like
display, video decode, video encode and camera. And there are different ports in
each larb. Take a example, there are some ports like MC, PP, UFO, VLD, AVC_MV,
PRED_RD, PRED_WR in video larb, all the ports are according to the video hardware.
From the diagram, all the multimedia module connect with m4u via smi.
SMI is responsible to enable/disable iommu and control the clocks for each local
arbiter. If we should enable the iommu of video decode, it should config the
video's ports. And if the video hardware work wether enable/disable iommu,
it should enable the clock of its larb's clock. So we add a special driver for smi.
[1] http://lists.linuxfoundation.org/pipermail/iommu/2015-February/012236.html
v2:
-add arm short descriptor support.
-seperate smi common from smi and change the clock-names according
to smi HW.
-delete the hardcode of the port-names in mt8173.
replace this with larb-portes-nr in dtsi.
-fix some coding style issues.
v1:
http://lists.infradead.org/pipermail/linux-mediatek/2015-March/000058.html
Yong Wu (6):
dt-bindings: iommu: Add binding for mediatek IOMMU
dt-bindings: mediatek: Add smi dts binding
iommu: add ARM short descriptor page table allocator.
iommu/mediatek: Add mt8173 IOMMU driver
soc: mediatek: Add SMI driver
dts: mt8173: Add iommu/smi nodes for mt8173
.../devicetree/bindings/iommu/mediatek,iommu.txt | 51 ++
.../bindings/soc/mediatek/mediatek,smi-larb.txt | 24 +
.../bindings/soc/mediatek/mediatek,smi.txt | 22 +
arch/arm64/boot/dts/mediatek/mt8173.dtsi | 79 +++
drivers/iommu/Kconfig | 18 +
drivers/iommu/Makefile | 2 +
drivers/iommu/io-pgtable-arm-short.c | 490 +++++++++++++++
drivers/iommu/io-pgtable.c | 4 +
drivers/iommu/io-pgtable.h | 6 +
drivers/iommu/mtk_iommu.c | 657 +++++++++++++++++++++
drivers/soc/mediatek/Kconfig | 6 +
drivers/soc/mediatek/Makefile | 1 +
drivers/soc/mediatek/mt8173-smi.c | 298 ++++++++++
include/dt-bindings/iommu/mt8173-iommu-port.h | 112 ++++
include/linux/mtk-smi.h | 39 ++
15 files changed, 1809 insertions(+)
create mode 100644 Documentation/devicetree/bindings/iommu/mediatek,iommu.txt
create mode 100644 Documentation/devicetree/bindings/soc/mediatek/mediatek,smi-larb.txt
create mode 100644 Documentation/devicetree/bindings/soc/mediatek/mediatek,smi.txt
create mode 100644 drivers/iommu/io-pgtable-arm-short.c
create mode 100644 drivers/iommu/mtk_iommu.c
create mode 100644 drivers/soc/mediatek/mt8173-smi.c
create mode 100644 include/dt-bindings/iommu/mt8173-iommu-port.h
create mode 100644 include/linux/mtk-smi.h
--
1.8.1.1.dirty
More information about the linux-arm-kernel
mailing list