[PATCH 3/8] clk: sunxi: Add a driver for the PLL2
Maxime Ripard
maxime.ripard at free-electrons.com
Fri May 15 00:45:20 PDT 2015
On Thu, May 14, 2015 at 05:43:51PM +0800, Chen-Yu Tsai wrote:
> Hi,
>
> On Sat, May 2, 2015 at 7:24 PM, Maxime Ripard
> <maxime.ripard at free-electrons.com> wrote:
> > The PLL2 on the A10 and later SoCs is the clock used for all the audio
> > related operations.
> >
> > This clock has a somewhat complex output tree, with three outputs (2X, 4X
> > and 8X) with a fixed divider from the base clock, and an output (1X) with a
> > post divider.
> >
> > However, we can simplify things since the 1X divider can be fixed, and we
> > end up by having a base clock not exposed to any device (or at least
> > directly, since the 4X output doesn't have any divider), and 4 fixed
> > divider clocks that will be exposed.
> >
> > This clock seems to have been introduced, at least in this form, in the
> > revision B of the A10, but we don't have any information on the clock used
> > on the revision A.
> >
> > Signed-off-by: Maxime Ripard <maxime.ripard at free-electrons.com>
> > ---
> > drivers/clk/sunxi/Makefile | 1 +
> > drivers/clk/sunxi/clk-a10-pll2.c | 176 +++++++++++++++++++++++++++++
> > include/dt-bindings/clock/sun4i-a10-pll2.h | 53 +++++++++
> > 3 files changed, 230 insertions(+)
> > create mode 100644 drivers/clk/sunxi/clk-a10-pll2.c
> > create mode 100644 include/dt-bindings/clock/sun4i-a10-pll2.h
> >
> > diff --git a/drivers/clk/sunxi/Makefile b/drivers/clk/sunxi/Makefile
> > index 058f273d6154..eb36c38d4120 100644
> > --- a/drivers/clk/sunxi/Makefile
> > +++ b/drivers/clk/sunxi/Makefile
> > @@ -4,6 +4,7 @@
> >
> > obj-y += clk-sunxi.o clk-factors.o
> > obj-y += clk-a10-hosc.o
> > +obj-y += clk-a10-pll2.o
> > obj-y += clk-a20-gmac.o
> > obj-y += clk-mod0.o
> > obj-y += clk-sun8i-mbus.o
> > diff --git a/drivers/clk/sunxi/clk-a10-pll2.c b/drivers/clk/sunxi/clk-a10-pll2.c
> > new file mode 100644
> > index 000000000000..4d0369626dba
> > --- /dev/null
> > +++ b/drivers/clk/sunxi/clk-a10-pll2.c
> > @@ -0,0 +1,176 @@
> > +/*
> > + * Copyright 2013 Emilio López
> > + * Emilio López <emilio at elopez.com.ar>
> > + *
> > + * Copyright 2015 Maxime Ripard
> > + * Maxime Ripard <maxime.ripard at free-electrons.com>
> > + *
> > + * This program is free software; you can redistribute it and/or modify
> > + * it under the terms of the GNU General Public License as published by
> > + * the Free Software Foundation; either version 2 of the License, or
> > + * (at your option) any later version.
> > + *
> > + * This program is distributed in the hope that it will be useful,
> > + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> > + * GNU General Public License for more details.
> > + */
> > +
> > +#include <linux/clk-provider.h>
> > +#include <linux/of.h>
> > +#include <linux/of_address.h>
> > +#include <linux/slab.h>
> > +
> > +#include <dt-bindings/clock/sun4i-a10-pll2.h>
> > +
> > +#include "clk-factors.h"
> > +
> > +#define SUN4I_PLL2_ENABLE 31
> > +#define SUN4I_PLL2_POST_DIV 26
> > +#define SUN4I_PLL2_POST_DIV_MASK 0xF
> > +#define SUN4I_PLL2_N 8
> > +#define SUN4I_PLL2_N_MASK 0x7F
> > +#define SUN4I_PLL2_PRE_DIV 0
> > +#define SUN4I_PLL2_PRE_DIV_MASK 0x1F
> > +
> > +#define SUN4I_PLL2_POST_DIV_VALUE 21
> > +#define SUN4I_PLL2_PRE_DIV_VALUE 4
> > +
> > +#define SUN4I_PLL2_OUTPUTS 4
> > +
> > +static void sun4i_a10_get_pll2_base_factors(u32 *freq, u32 parent_rate,
> > + u8 *n, u8 *k, u8 *m, u8 *p)
> > +{
> > + /*
> > + * Normalize the frequency to a multiple of (24 MHz / Fixed
> > + * PRE-DIV)
> > + */
> > + *freq = round_down(*freq, parent_rate / SUN4I_PLL2_PRE_DIV_VALUE);
> > +
> > + /* We were called to round the frequency, we can return */
> > + if (!n)
> > + return;
> > +
> > + *n = *freq * SUN4I_PLL2_PRE_DIV_VALUE / parent_rate;
> > +
> > + /*
> > + * Even though the pre-divider can be changed, we don't really
> > + * care and we can just fix it to 4.
> > + */
> > + *m = SUN4I_PLL2_PRE_DIV_VALUE;
> > +}
> > +
> > +static struct clk_factors_config sun4i_a10_pll2_base_config = {
> > + .mshift = SUN4I_PLL2_PRE_DIV,
> > + .mwidth = 5,
> > + .nshift = SUN4I_PLL2_N,
> > + .nwidth = 7,
> > +
> > + .m_zero = 1,
> > + .n_zero = 1,
> > +};
> > +
> > +static const struct factors_data sun4i_a10_pll2_base_data __initconst = {
> > + .enable = SUN4I_PLL2_ENABLE,
> > + .table = &sun4i_a10_pll2_base_config,
> > + .getter = sun4i_a10_get_pll2_base_factors,
> > + .name = "pll2-base",
> > +};
> > +
> > +static DEFINE_SPINLOCK(sun4i_a10_pll2_lock);
> > +
> > +static void __init sun4i_pll2_setup(struct device_node *node)
> > +{
> > + const char *clk_name = node->name, *parent;
> > + struct clk_onecell_data *clk_data;
> > + struct clk **clks, *base_clk;
> > + void __iomem *reg;
> > + u32 val;
> > +
> > + reg = of_io_request_and_map(node, 0, of_node_full_name(node));
> > + if (IS_ERR(reg))
> > + return;
> > +
> > + clk_data = kzalloc(sizeof(*clk_data), GFP_KERNEL);
> > + if (!clk_data)
> > + goto err_unmap;
> > +
> > + clks = kcalloc(SUN4I_PLL2_OUTPUTS, sizeof(struct clk *), GFP_KERNEL);
> > + if (!clks)
> > + goto err_free_data;
> > +
> > + base_clk = sunxi_factors_register(node, &sun4i_a10_pll2_base_data,
> > + &sun4i_a10_pll2_lock, reg);
>
> Why aren't you using divs_clk for this? It seems right for the job.
As far as I know, divs_clk can only handle a single divider, and not
two subsequent dividers like this one uses.
Maxime
--
Maxime Ripard, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: Digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20150515/2f099d3d/attachment-0001.sig>
More information about the linux-arm-kernel
mailing list