[RFC/RFT PATCH 2/2] ARM64: kernel: pci: implement PCI device resources claiming

[Suravee Suthikulanit]

On 5/14/2015 9:42 AM, Lorenzo Pieralisi wrote:
> When a device is scanned and added to the PCI bus, its resources
> should be claimed to validate the BARs configuration and to assign
> them a parent resource so that the resource hierarchy can be sanity
> checked.
>
> This patch adds code that carries out PCI device resources claiming to
> the ARM64 pcibios_add_device implementation so that device resources
> are claimed by the core PCI layer upon PCI device initialization on
> ARM64 systems.
>
> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi at arm.com>
> Cc: Arnd Bergmann <arnd at arndb.de>
> Cc: Will Deacon <will.deacon at arm.com>
> Cc: Liviu Dudau <liviu.dudau at arm.com>
> Cc: Bjorn Helgaas <bhelgaas at google.com>
> ---
>   arch/arm64/kernel/pci.c | 10 ++++++++++
>   1 file changed, 10 insertions(+)
>
> diff --git a/arch/arm64/kernel/pci.c b/arch/arm64/kernel/pci.c
> index 4095379..c0a88ca 100644
> --- a/arch/arm64/kernel/pci.c
> +++ b/arch/arm64/kernel/pci.c
> @@ -43,8 +43,18 @@ resource_size_t pcibios_align_resource(void *data, const struct resource *res,
>    */
>   int pcibios_add_device(struct pci_dev *dev)
>   {
> +	struct resource *res;
> +	int i;
> +
>   	dev->irq = of_irq_parse_and_map_pci(dev, 0, 0);
>
> +	for (i = 0; i < PCI_NUM_RESOURCES; i++) {
> +		res = &dev->resource[i];
> +		if (res->parent || !res->flags)
> +			continue;
> +		pci_claim_resource(dev, i);
> +	}
> +
>   	return 0;
>   }
>
>

Lorenzo/Bjorn,

I have tested this patch on top of Jayachandran's V2 patch series 
(http://www.spinics.net/lists/linux-pci/msg40811.html) on AMD Seattle 
(w/ PROBE_ONLY and non-PROBE_ONLY mode), and your changes here works 
with additional changes below.

It seems that when booting w/ PROBE_ONLY case, we need to call 
pci_read_bridge_bases() at some point before claiming the resources of 
devices underneath the bridge. This is needed to determine the bridge 
bases (i.e. bridge io, mmio and mmio_pref bases), and update bridge 
resources accordingly.

---- BEGIN PATCH -----
diff --git a/arch/arm64/kernel/pci.c b/arch/arm64/kernel/pci.c
index c0a88ca..57be6aa 100644
--- a/arch/arm64/kernel/pci.c
+++ b/arch/arm64/kernel/pci.c
@@ -48,6 +48,11 @@ int pcibios_add_device(struct pci_dev *dev)

         dev->irq = of_irq_parse_and_map_pci(dev, 0, 0);

+       if (pci_has_flag(PCI_PROBE_ONLY) &&
+           !pci_is_root_bus(dev->bus) &&
+           !pci_bridge_bases_is_read(dev->bus))
+               pci_read_bridge_bases(dev->bus);
+
         for (i = 0; i < PCI_NUM_RESOURCES; i++) {
                 res = &dev->resource[i];
                 if (res->parent || !res->flags)
diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c
index 6675a7a..6cab8be 100644
--- a/drivers/pci/probe.c
+++ b/drivers/pci/probe.c
@@ -447,6 +447,13 @@ static void pci_read_bridge_mmio_pref(struct 
pci_bus *child)
         }
  }

+bool pci_bridge_bases_is_read(struct pci_bus *bus)
+{
+       return (bus->resource[0]->start ||
+               bus->resource[1]->start ||
+               bus->resource[2]->start);
+}
+
  void pci_read_bridge_bases(struct pci_bus *child)
  {
         struct pci_dev *dev = child->self;
diff --git a/include/linux/pci.h b/include/linux/pci.h
index 353db8d..11c674d 100644
--- a/include/linux/pci.h
+++ b/include/linux/pci.h
@@ -798,6 +798,7 @@ void pci_device_add(struct pci_dev *dev, struct 
pci_bus *bus);
  unsigned int pci_scan_child_bus(struct pci_bus *bus);
  void pci_bus_add_device(struct pci_dev *dev);
  void pci_read_bridge_bases(struct pci_bus *child);
+bool pci_bridge_bases_is_read(struct pci_bus *bus);
  struct resource *pci_find_parent_resource(const struct pci_dev *dev,
                                           struct resource *res);
  u8 pci_swizzle_interrupt_pin(const struct pci_dev *dev, u8 pin);
---- END PATCH -----

I'm not sure if this is the best place to be reading the bridge bases. 
I guess we should be able to do this when adding bridge devices.

Thanks,

Suravee