[PATCH] iio: adc: xilinx-xadc: Convert to raw spinlock

[Xander Huff]

On 5/14/2015 12:10 PM, Sebastian Andrzej Siewior wrote:
>
> Do you have any cyclictest numbers how much the latency increases on
> heavy iio usage? Traditionally the primary handler should be very quick
> / short.
>
> Sebastian
>
With no other processes running, I got the following results after a couple of 
hours on one of our devices:

admin at Xander-roboRIO:~# cyclictest -S -m -p 98
# /dev/cpu_dma_latency set to 0us
policy: fifo: loadavg: 0.01 0.07 0.12 1/176 1473

T: 0 ( 1373) P:98 I:1000 C:6503872 Min:      9 Act:   13 Avg:   13 Max:      51
T: 1 ( 1374) P:98 I:1500 C:4335914 Min:      9 Act:   12 Avg:   13 Max:      49

With a VI reading all default handles (raw, offset, scale, sampling_frequency) 
in /sys/bus/iio/devices/iio:device0 constantly in a while loop, I got the 
following results after a couple hours on the same device:

admin at Xander-roboRIO:~# cyclictest -S -m -p 98
# /dev/cpu_dma_latency set to 0us
policy: fifo: loadavg: 6.93 7.30 7.47 3/182 1530

T: 0 ( 1487) P:98 I:1000 C:4497008 Min:     11 Act:   20 Avg:   21 Max:      69
T: 1 ( 1488) P:98 I:1500 C:2998005 Min:     11 Act:   20 Avg:   22 Max:      59

-- 
Xander Huff
Staff Software Engineer
National Instruments