[PATCH 0/7] Change snvs rtc and poweroff to use syscon add pwrkey driver
Frank.Li at freescale.com
Frank.Li at freescale.com
Thu May 14 10:18:46 PDT 2015
From: Frank Li <Frank.Li at freescale.com>
SNVS is MPF module.
include rtc, power off, ON/OFF power key
arm: imx: power-off: change to syscon to access register
rtc: arm: imx: snvs: change use syscon to access register
Above two patch change existed power-off and rtc use syscon
Document: dt: fsl: snvs: change support syscon
arm: dts: imx: update snvs to use syscon access register
Update dt file and document
input: keyboard: imx: add snvs power key driver
document: devicetree: input: imx: i.mx snvs power device tree bindings
arm: dts: imx6sx: enable snvs power key
Added on/off key driver
Frank Li (6):
arm: imx: power-off: change to syscon to access register
rtc: arm: imx: snvs: change use syscon to access register
Document: dt: fsl: snvs: change support syscon
arm: dts: imx: update snvs to use syscon access register
document: devicetree: input: imx: i.mx snvs power device tree bindings
arm: dts: imx6sx: enable snvs power key
Robin Gong (1):
input: keyboard: imx: add snvs power key driver
.../devicetree/bindings/crypto/fsl-sec4.txt | 93 +++++++--
.../devicetree/bindings/input/snvs-pwrkey.txt | 1 +
.../bindings/power_supply/imx-snvs-poweroff.txt | 24 +--
arch/arm/boot/dts/imx6qdl.dtsi | 12 +-
arch/arm/boot/dts/imx6sl.dtsi | 12 +-
arch/arm/boot/dts/imx6sx.dtsi | 19 +-
arch/arm/boot/dts/vfxxx.dtsi | 9 +-
drivers/input/keyboard/Kconfig | 11 +
drivers/input/keyboard/Makefile | 1 +
drivers/input/keyboard/snvs_pwrkey.c | 232 +++++++++++++++++++++
drivers/power/reset/imx-snvs-poweroff.c | 21 +-
drivers/rtc/rtc-snvs.c | 124 +++++------
12 files changed, 417 insertions(+), 142 deletions(-)
create mode 100644 Documentation/devicetree/bindings/input/snvs-pwrkey.txt
create mode 100644 drivers/input/keyboard/snvs_pwrkey.c
--
1.9.1
More information about the linux-arm-kernel
mailing list