[PATCH 2/2] pwm: add Mediatek display PWM driver support
YH Huang
yh.huang at mediatek.com
Thu May 14 07:39:12 PDT 2015
On Tue, 2015-05-12 at 14:37 +0200, Matthias Brugger wrote:
> Hi YH,
>
> 2015-05-11 11:26 GMT+02:00 YH Huang <yh.huang at mediatek.com>:
> > Add display PWM driver support to modify backlight for MT8173/MT6595.
> >
> > Signed-off-by: YH Huang <yh.huang at mediatek.com>
> > ---
> > drivers/pwm/Kconfig | 9 ++
> > drivers/pwm/Makefile | 1 +
> > drivers/pwm/pwm-disp-mediatek.c | 225 ++++++++++++++++++++++++++++++++++++++++
> > 3 files changed, 235 insertions(+)
> > create mode 100644 drivers/pwm/pwm-disp-mediatek.c
> >
> > diff --git a/drivers/pwm/Kconfig b/drivers/pwm/Kconfig
> > index b1541f4..9edbb5a 100644
> > --- a/drivers/pwm/Kconfig
> > +++ b/drivers/pwm/Kconfig
> > @@ -111,6 +111,15 @@ config PWM_CLPS711X
> > To compile this driver as a module, choose M here: the module
> > will be called pwm-clps711x.
> >
> > +config PWM_DISP_MEDIATEK
> > + tristate "MEDIATEK display PWM driver"
> > + depends on OF
> > + help
> > + Generic PWM framework driver for mediatek disp-pwm device.
> > +
> > + To compile this driver as a module, choose M here: the module
> > + will be called pwm-disp-mediatek.
> > +
> > config PWM_EP93XX
> > tristate "Cirrus Logic EP93xx PWM support"
> > depends on ARCH_EP93XX
> > diff --git a/drivers/pwm/Makefile b/drivers/pwm/Makefile
> > index ec50eb5..c5ff72a 100644
> > --- a/drivers/pwm/Makefile
> > +++ b/drivers/pwm/Makefile
> > @@ -8,6 +8,7 @@ obj-$(CONFIG_PWM_BCM_KONA) += pwm-bcm-kona.o
> > obj-$(CONFIG_PWM_BCM2835) += pwm-bcm2835.o
> > obj-$(CONFIG_PWM_BFIN) += pwm-bfin.o
> > obj-$(CONFIG_PWM_CLPS711X) += pwm-clps711x.o
> > +obj-$(CONFIG_PWM_DISP_MEDIATEK) += pwm-disp-mediatek.o
> > obj-$(CONFIG_PWM_EP93XX) += pwm-ep93xx.o
> > obj-$(CONFIG_PWM_FSL_FTM) += pwm-fsl-ftm.o
> > obj-$(CONFIG_PWM_IMG) += pwm-img.o
> > diff --git a/drivers/pwm/pwm-disp-mediatek.c b/drivers/pwm/pwm-disp-mediatek.c
> > new file mode 100644
> > index 0000000..38293af
> > --- /dev/null
> > +++ b/drivers/pwm/pwm-disp-mediatek.c
> > @@ -0,0 +1,225 @@
> > +/*
> > + * Mediatek display pulse-width-modulation controller driver.
> > + * Copyright (c) 2015 MediaTek Inc.
> > + * Author: YH Huang <yh.huang at mediatek.com>
> > + *
> > + * This program is free software; you can redistribute it and/or modify
> > + * it under the terms of the GNU General Public License version 2 as
> > + * published by the Free Software Foundation.
> > + *
> > + * This program is distributed in the hope that it will be useful,
> > + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> > + * GNU General Public License for more details.
> > + */
> > +
> > +#include <linux/clk.h>
> > +#include <linux/err.h>
> > +#include <linux/io.h>
> > +#include <linux/module.h>
> > +#include <linux/of.h>
> > +#include <linux/pwm.h>
> > +#include <linux/platform_device.h>
> > +#include <linux/slab.h>
> > +
> > +#define DISP_PWM_EN_OFF (0x0)
> > +#define PWM_ENABLE_SHIFT (0x0)
> > +#define PWM_ENABLE_MASK (0x1 << PWM_ENABLE_SHIFT)
>
> Get rid of the _SHIFT which are actually zero, it will make the code
> more readable.
>
It seems unnecessary to add it and I will fix it.
> > +
> > +#define DISP_PWM_COMMIT_OFF (0x08)
> > +#define PWM_COMMIT_SHIFT (0x0)
> > +#define PWM_COMMIT_MASK (0x1 << PWM_COMMIT_SHIFT)
> > +
> > +#define DISP_PWM_CON_0_OFF (0x10)
> > +#define PWM_CLKDIV_SHIFT (0x10)
> > +#define PWM_CLKDIV_MASK (0x3ff << PWM_CLKDIV_SHIFT)
> > +#define PWM_CLKDIV_MAX (0x000003ff)
> > +
> > +#define DISP_PWM_CON_1_OFF (0x14)
> > +#define PWM_PERIOD_SHIFT (0x0)
> > +#define PWM_PERIOD_MASK (0xfff << PWM_PERIOD_SHIFT)
> > +#define PWM_PERIOD_MAX (0x00000fff)
> > +/* Shift log2(PWM_PERIOD_MAX + 1) as divisor */
> > +#define PWM_PERIOD_BIT_SHIFT 12
> > +
> > +#define PWM_HIGH_WIDTH_SHIFT (0x10)
> > +#define PWM_HIGH_WIDTH_MASK (0x1fff << PWM_HIGH_WIDTH_SHIFT)
> > +
> > +#define NUM_PWM 1
> > +
> > +struct mtk_disp_pwm_chip {
> > + struct pwm_chip chip;
> > + struct device *dev;
> > + struct clk *clk_main;
> > + struct clk *clk_mm;
> > + void __iomem *mmio_base;
> > +};
> > +
> > +static void mtk_disp_pwm_setting(void __iomem *address, u32 value, u32 mask)
> > +{
> > + u32 val;
> > +
> > + val = readl(address);
> > + val &= ~mask;
> > + val |= value;
> > + writel(val, address);
> > +}
> > +
> > +static int mtk_disp_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
> > + int duty_ns, int period_ns)
> > +{
> > + struct mtk_disp_pwm_chip *mpc;
> > + u64 div, rate;
> > + u32 clk_div, period, high_width, rem;
> > +
> > + /*
> > + * Find period, high_width and clk_div to suit duty_ns and period_ns.
> > + * Calculate proper div value to keep period value in the bound.
> > + *
> > + * period_ns = 10^9 * (clk_div + 1) * (period +1) / PWM_CLK_RATE
> > + * duty_ns = 10^9 * (clk_div + 1) * (high_width + 1) / PWM_CLK_RATE
> > + *
> > + * period = (PWM_CLK_RATE * period_ns) / (10^9 * (clk_div + 1)) - 1
> > + * high_width = (PWM_CLK_RATE * duty_ns) / (10^9 * (clk_div + 1)) - 1
> > + */
> > + mpc = container_of(chip, struct mtk_disp_pwm_chip, chip);
> > + rate = clk_get_rate(mpc->clk_main);
> > + clk_div = div_u64_rem(rate * period_ns, NSEC_PER_SEC, &rem) >>
> > + PWM_PERIOD_BIT_SHIFT;
>
> You never use the remainder, so better use div_u64 to make the code cleaner.
>
OK.
> > + if (clk_div > PWM_CLKDIV_MAX)
> > + return -EINVAL;
> > +
> > + div = clk_div + 1;
> > + period = div64_u64(rate * period_ns, NSEC_PER_SEC * div);
> > + if (period > 0)
> > + period--;
> > + high_width = div64_u64(rate * duty_ns, NSEC_PER_SEC * div);
> > + if (high_width > 0)
> > + high_width--;
> > +
> > + mtk_disp_pwm_setting(mpc->mmio_base + DISP_PWM_CON_0_OFF,
> > + clk_div << PWM_CLKDIV_SHIFT, PWM_CLKDIV_MASK);
> > + mtk_disp_pwm_setting(mpc->mmio_base + DISP_PWM_CON_1_OFF,
> > + (period << PWM_PERIOD_SHIFT) |
> > + (high_width << PWM_HIGH_WIDTH_SHIFT),
> > + PWM_PERIOD_MASK | PWM_HIGH_WIDTH_MASK);
> > +
> > + mtk_disp_pwm_setting(mpc->mmio_base + DISP_PWM_COMMIT_OFF,
> > + 1 << PWM_COMMIT_SHIFT, PWM_COMMIT_MASK);
> > + mtk_disp_pwm_setting(mpc->mmio_base + DISP_PWM_COMMIT_OFF,
> > + 0 << PWM_COMMIT_SHIFT, PWM_COMMIT_MASK);
> > +
> > + return 0;
> > +}
> > +
> > +static int mtk_disp_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm)
> > +{
> > + struct mtk_disp_pwm_chip *mpc;
> > +
> > + mpc = container_of(chip, struct mtk_disp_pwm_chip, chip);
> > + mtk_disp_pwm_setting(mpc->mmio_base + DISP_PWM_EN_OFF,
> > + 1 << PWM_ENABLE_SHIFT, PWM_ENABLE_MASK);
> > +
> > + return 0;
> > +}
> > +
> > +static void mtk_disp_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm)
> > +{
> > + struct mtk_disp_pwm_chip *mpc;
> > +
> > + mpc = container_of(chip, struct mtk_disp_pwm_chip, chip);
> > + mtk_disp_pwm_setting(mpc->mmio_base + DISP_PWM_EN_OFF,
> > + 0 << PWM_ENABLE_SHIFT, PWM_ENABLE_MASK);
> > +}
> > +
> > +static const struct pwm_ops mtk_disp_pwm_ops = {
> > + .config = mtk_disp_pwm_config,
> > + .enable = mtk_disp_pwm_enable,
> > + .disable = mtk_disp_pwm_disable,
> > + .owner = THIS_MODULE,
> > +};
> > +
> > +static int mtk_disp_pwm_probe(struct platform_device *pdev)
> > +{
> > + struct mtk_disp_pwm_chip *pwm;
> > + struct resource *r;
> > + int ret;
> > +
> > + pwm = devm_kzalloc(&pdev->dev, sizeof(*pwm), GFP_KERNEL);
> > + if (!pwm)
> > + return -ENOMEM;
> > +
> > + pwm->dev = &pdev->dev;
> > +
> > + r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> > + pwm->mmio_base = devm_ioremap_resource(&pdev->dev, r);
> > + if (IS_ERR(pwm->mmio_base))
> > + return PTR_ERR(pwm->mmio_base);
> > +
> > + pwm->clk_main = devm_clk_get(&pdev->dev, "main");
> > + if (IS_ERR(pwm->clk_main))
> > + return PTR_ERR(pwm->clk_main);
>
> I prefer to have a newline after the if-then-ese block, which makes it
> (at least for me) easier to read the code.
>
OK.
> Thanks,
> Matthias
Thank for your suggestion.
Regards,
YH Huang
More information about the linux-arm-kernel
mailing list