[PATCH 2/5] arm64: Juno: Split juno.dts into juno-base.dtsi and juno.dts.
Liviu Dudau
Liviu.Dudau at arm.com
Wed May 13 10:11:29 PDT 2015
Prepare the device tree for adding more boards based on Juno r0.
Signed-off-by: Liviu Dudau <Liviu.Dudau at arm.com>
---
arch/arm64/boot/dts/arm/juno-base.dtsi | 125 +++++++++++++++++++++++++++++++++
arch/arm64/boot/dts/arm/juno.dts | 122 +-------------------------------
2 files changed, 126 insertions(+), 121 deletions(-)
create mode 100644 arch/arm64/boot/dts/arm/juno-base.dtsi
diff --git a/arch/arm64/boot/dts/arm/juno-base.dtsi b/arch/arm64/boot/dts/arm/juno-base.dtsi
new file mode 100644
index 0000000..2faa68a
--- /dev/null
+++ b/arch/arm64/boot/dts/arm/juno-base.dtsi
@@ -0,0 +1,125 @@
+ /*
+ * Devices shared by all Juno boards
+ */
+
+ gic: interrupt-controller at 2c010000 {
+ compatible = "arm,gic-400", "arm,cortex-a15-gic";
+ reg = <0x0 0x2c010000 0 0x1000>,
+ <0x0 0x2c02f000 0 0x2000>,
+ <0x0 0x2c04f000 0 0x2000>,
+ <0x0 0x2c06f000 0 0x2000>;
+ #address-cells = <0>;
+ #interrupt-cells = <3>;
+ interrupt-controller;
+ interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_HIGH)>;
+ };
+
+ timer {
+ compatible = "arm,armv8-timer";
+ interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>;
+ };
+
+ /include/ "juno-clocks.dtsi"
+
+ dma at 7ff00000 {
+ compatible = "arm,pl330", "arm,primecell";
+ reg = <0x0 0x7ff00000 0 0x1000>;
+ #dma-cells = <1>;
+ #dma-channels = <8>;
+ #dma-requests = <32>;
+ interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&soc_faxiclk>;
+ clock-names = "apb_pclk";
+ };
+
+ soc_uart0: uart at 7ff80000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0x0 0x7ff80000 0x0 0x1000>;
+ interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&soc_uartclk>, <&soc_refclk100mhz>;
+ clock-names = "uartclk", "apb_pclk";
+ };
+
+ i2c at 7ffa0000 {
+ compatible = "snps,designware-i2c";
+ reg = <0x0 0x7ffa0000 0x0 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
+ clock-frequency = <400000>;
+ i2c-sda-hold-time-ns = <500>;
+ clocks = <&soc_smc50mhz>;
+
+ dvi0: dvi-transmitter at 70 {
+ compatible = "nxp,tda998x";
+ reg = <0x70>;
+ };
+
+ dvi1: dvi-transmitter at 71 {
+ compatible = "nxp,tda998x";
+ reg = <0x71>;
+ };
+ };
+
+ ohci at 7ffb0000 {
+ compatible = "generic-ohci";
+ reg = <0x0 0x7ffb0000 0x0 0x10000>;
+ interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&soc_usb48mhz>;
+ };
+
+ ehci at 7ffc0000 {
+ compatible = "generic-ehci";
+ reg = <0x0 0x7ffc0000 0x0 0x10000>;
+ interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&soc_usb48mhz>;
+ };
+
+ memory-controller at 7ffd0000 {
+ compatible = "arm,pl354", "arm,primecell";
+ reg = <0 0x7ffd0000 0 0x1000>;
+ interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&soc_smc50mhz>;
+ clock-names = "apb_pclk";
+ };
+
+ smb {
+ compatible = "simple-bus";
+ #address-cells = <2>;
+ #size-cells = <1>;
+ ranges = <0 0 0 0x08000000 0x04000000>,
+ <1 0 0 0x14000000 0x04000000>,
+ <2 0 0 0x18000000 0x04000000>,
+ <3 0 0 0x1c000000 0x04000000>,
+ <4 0 0 0x0c000000 0x04000000>,
+ <5 0 0 0x10000000 0x04000000>;
+
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 15>;
+ interrupt-map = <0 0 0 &gic 0 68 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 1 &gic 0 69 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 2 &gic 0 70 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 3 &gic 0 160 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 4 &gic 0 161 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 5 &gic 0 162 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 6 &gic 0 163 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 7 &gic 0 164 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 8 &gic 0 165 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 9 &gic 0 166 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 10 &gic 0 167 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 11 &gic 0 168 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 12 &gic 0 169 IRQ_TYPE_LEVEL_HIGH>;
+
+ /include/ "juno-motherboard.dtsi"
+ };
diff --git a/arch/arm64/boot/dts/arm/juno.dts b/arch/arm64/boot/dts/arm/juno.dts
index 7ab0713..60e8928 100644
--- a/arch/arm64/boot/dts/arm/juno.dts
+++ b/arch/arm64/boot/dts/arm/juno.dts
@@ -98,26 +98,6 @@
<0x00000008 0x80000000 0x1 0x80000000>;
};
- gic: interrupt-controller at 2c010000 {
- compatible = "arm,gic-400", "arm,cortex-a15-gic";
- reg = <0x0 0x2c010000 0 0x1000>,
- <0x0 0x2c02f000 0 0x2000>,
- <0x0 0x2c04f000 0 0x2000>,
- <0x0 0x2c06f000 0 0x2000>;
- #address-cells = <0>;
- #interrupt-cells = <3>;
- interrupt-controller;
- interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_HIGH)>;
- };
-
- timer {
- compatible = "arm,armv8-timer";
- interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>,
- <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>,
- <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>,
- <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>;
- };
-
pmu {
compatible = "arm,armv8-pmuv3";
interrupts = <GIC_SPI 02 IRQ_TYPE_LEVEL_HIGH>,
@@ -134,105 +114,5 @@
<&A53_3>;
};
- /include/ "juno-clocks.dtsi"
-
- dma at 7ff00000 {
- compatible = "arm,pl330", "arm,primecell";
- reg = <0x0 0x7ff00000 0 0x1000>;
- #dma-cells = <1>;
- #dma-channels = <8>;
- #dma-requests = <32>;
- interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&soc_faxiclk>;
- clock-names = "apb_pclk";
- };
-
- soc_uart0: uart at 7ff80000 {
- compatible = "arm,pl011", "arm,primecell";
- reg = <0x0 0x7ff80000 0x0 0x1000>;
- interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&soc_uartclk>, <&soc_refclk100mhz>;
- clock-names = "uartclk", "apb_pclk";
- };
-
- i2c at 7ffa0000 {
- compatible = "snps,designware-i2c";
- reg = <0x0 0x7ffa0000 0x0 0x1000>;
- #address-cells = <1>;
- #size-cells = <0>;
- interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
- clock-frequency = <400000>;
- i2c-sda-hold-time-ns = <500>;
- clocks = <&soc_smc50mhz>;
-
- dvi0: dvi-transmitter at 70 {
- compatible = "nxp,tda998x";
- reg = <0x70>;
- };
-
- dvi1: dvi-transmitter at 71 {
- compatible = "nxp,tda998x";
- reg = <0x71>;
- };
- };
-
- ohci at 7ffb0000 {
- compatible = "generic-ohci";
- reg = <0x0 0x7ffb0000 0x0 0x10000>;
- interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&soc_usb48mhz>;
- };
-
- ehci at 7ffc0000 {
- compatible = "generic-ehci";
- reg = <0x0 0x7ffc0000 0x0 0x10000>;
- interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&soc_usb48mhz>;
- };
-
- memory-controller at 7ffd0000 {
- compatible = "arm,pl354", "arm,primecell";
- reg = <0 0x7ffd0000 0 0x1000>;
- interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&soc_smc50mhz>;
- clock-names = "apb_pclk";
- };
-
- smb {
- compatible = "simple-bus";
- #address-cells = <2>;
- #size-cells = <1>;
- ranges = <0 0 0 0x08000000 0x04000000>,
- <1 0 0 0x14000000 0x04000000>,
- <2 0 0 0x18000000 0x04000000>,
- <3 0 0 0x1c000000 0x04000000>,
- <4 0 0 0x0c000000 0x04000000>,
- <5 0 0 0x10000000 0x04000000>;
-
- #interrupt-cells = <1>;
- interrupt-map-mask = <0 0 15>;
- interrupt-map = <0 0 0 &gic 0 68 IRQ_TYPE_LEVEL_HIGH>,
- <0 0 1 &gic 0 69 IRQ_TYPE_LEVEL_HIGH>,
- <0 0 2 &gic 0 70 IRQ_TYPE_LEVEL_HIGH>,
- <0 0 3 &gic 0 160 IRQ_TYPE_LEVEL_HIGH>,
- <0 0 4 &gic 0 161 IRQ_TYPE_LEVEL_HIGH>,
- <0 0 5 &gic 0 162 IRQ_TYPE_LEVEL_HIGH>,
- <0 0 6 &gic 0 163 IRQ_TYPE_LEVEL_HIGH>,
- <0 0 7 &gic 0 164 IRQ_TYPE_LEVEL_HIGH>,
- <0 0 8 &gic 0 165 IRQ_TYPE_LEVEL_HIGH>,
- <0 0 9 &gic 0 166 IRQ_TYPE_LEVEL_HIGH>,
- <0 0 10 &gic 0 167 IRQ_TYPE_LEVEL_HIGH>,
- <0 0 11 &gic 0 168 IRQ_TYPE_LEVEL_HIGH>,
- <0 0 12 &gic 0 169 IRQ_TYPE_LEVEL_HIGH>;
-
- /include/ "juno-motherboard.dtsi"
- };
+ #include "juno-base.dtsi"
};
--
2.3.6
More information about the linux-arm-kernel
mailing list