[PATCHv5 3/5] ARM: dts: define default thermal-zones for exynos5422

[Anand Moon]

Trip points corresponding to the one defined in the exynos_tmu_data.c
for Exynos5 have been included.
This thermal-zones attribute is afterwards reused for Exynos5422.

Tested-by: Markus Reichl <m.reichl at fivetechno.de>
Acked-by: Lukasz Majewski <l.majewski at samsung.com>
Signed-off-by: Anand Moon <linux.amoon at gmail.com>
---
 arch/arm/boot/dts/exynos5-cpu-thermal.dtsi | 59 ++++++++++++++++++++++++++++++
 1 file changed, 59 insertions(+)
 create mode 100644 arch/arm/boot/dts/exynos5-cpu-thermal.dtsi

diff --git a/arch/arm/boot/dts/exynos5-cpu-thermal.dtsi b/arch/arm/boot/dts/exynos5-cpu-thermal.dtsi
new file mode 100644
index 0000000..508375d
--- /dev/null
+++ b/arch/arm/boot/dts/exynos5-cpu-thermal.dtsi
@@ -0,0 +1,59 @@
+/*
+ * Device tree sources for Exynos5 thermal zone
+ *
+ * Copyright (c) 2015 Lukasz Majewski <l.majewski at samsung.com>
+ *			Anand Moon <linux.amoon at gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <dt-bindings/thermal/thermal.h>
+
+/ {
+	thermal-zones {
+		cpu0_thermal: cpu0-thermal {
+			thermal-sensors = <&tmu_cpu0 0>;
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			trips {
+				cpu_alert0: cpu-alert-0 {
+					temperature = <50000>; /* millicelsius */
+					hysteresis = <5000>; /* millicelsius */
+					type = "active";
+				};
+				cpu_alert1: cpu-alert-1 {
+					temperature = <60000>; /* millicelsius */
+					hysteresis = <5000>; /* millicelsius */
+					type = "active";
+				};
+				cpu_alert2: cpu-alert-2 {
+					temperature = <70000>; /* millicelsius */
+					hysteresis = <5000>; /* millicelsius */
+					type = "active";
+				};
+				cpu_crit0: cpu-crit-0 {
+					temperature = <120000>; /* millicelsius */
+					hysteresis = <0>; /* millicelsius */
+					type = "critical";
+				};
+			};
+			cooling-maps {
+				map0 {
+				     trip = <&cpu_alert0>;
+				     cooling-device = <&fan0 0 1>;
+				};
+				map1 {
+				     trip = <&cpu_alert1>;
+				     cooling-device = <&fan0 1 2>;
+				};
+				map2 {
+				     trip = <&cpu_alert2>;
+				     cooling-device = <&fan0 2 3>;
+				};
+			};
+		};
+	};
+};
-- 
1.9.1