[PATCHv3 2/3] ARM: exynos_defconfig: Enable CONFIG_SENSORS_INA2XX for Odroid-XU3

[Anand Moon]

Odroid-XU3 board support power monitor sensor.

Below is the output of boot log.
[    3.241438] ina2xx 0-0040: power monitor ina231 (Rshunt = 10000 uOhm)
[    3.248068] ina2xx 0-0041: power monitor ina231 (Rshunt = 10000 uOhm)
[    3.254724] ina2xx 0-0044: power monitor ina231 (Rshunt = 10000 uOhm)
[    3.261354] ina2xx 0-0045: power monitor ina231 (Rshunt = 10000 uOhm)

ina231-i2c-0-40
Adapter: s3c2410-i2c
in0:          +0.00 V
in1:          +1.01 V
power1:      175.00 mW
curr1:        +0.18 A

ina231-i2c-0-41
Adapter: s3c2410-i2c
in0:          +0.00 V
in1:          +1.21 V
power1:       50.00 mW
curr1:        +0.04 A

ina231-i2c-0-44
Adapter: s3c2410-i2c
in0:          +0.00 V
in1:          +1.02 V
power1:       50.00 mW
curr1:        +0.04 A

ina231-i2c-0-45
Adapter: s3c2410-i2c
in0:          +0.00 V
in1:          +1.04 V
power1:       75.00 mW
curr1:        +0.07 A

Reviewed-by: Krzysztof Kozlowski <k.kozlowski at samsung.com>
Signed-off-by: Anand Moon <linux.amoon at gmail.com>
---
 arch/arm/configs/exynos_defconfig | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm/configs/exynos_defconfig b/arch/arm/configs/exynos_defconfig
index 3c2784f..300678a 100644
--- a/arch/arm/configs/exynos_defconfig
+++ b/arch/arm/configs/exynos_defconfig
@@ -102,6 +102,7 @@ CONFIG_CHARGER_TPS65090=y
 CONFIG_HWMON=y
 CONFIG_SENSORS_LM90=y
 CONFIG_SENSORS_PWM_FAN=y
+CONFIG_SENSORS_INA2XX=y
 CONFIG_CPU_FREQ=y
 CONFIG_CPU_THERMAL=y
 CONFIG_THERMAL=y
-- 
1.9.1