[PATCHv2 27/27] clk: ti: move low-level access and init code under clock driver
Tero Kristo
t-kristo at ti.com
Mon May 11 01:54:53 PDT 2015
With most of the clock code under clock driver already, the low-level
register access code, and the init code for the same, is no longer
needed outside the clock driver. Thus, these can be moved under clock
driver also.
Signed-off-by: Tero Kristo <t-kristo at ti.com>
---
arch/arm/mach-omap2/clock.c | 84 -------------------------------------------
arch/arm/mach-omap2/clock.h | 5 ---
drivers/clk/ti/clk.c | 75 ++++++++++++++++++++++++++++++++++++--
include/linux/clk/ti.h | 7 +++-
4 files changed, 78 insertions(+), 93 deletions(-)
diff --git a/arch/arm/mach-omap2/clock.c b/arch/arm/mach-omap2/clock.c
index 79cec5f..4340ba6 100644
--- a/arch/arm/mach-omap2/clock.c
+++ b/arch/arm/mach-omap2/clock.c
@@ -23,9 +23,7 @@
#include <linux/clk-provider.h>
#include <linux/io.h>
#include <linux/bitops.h>
-#include <linux/regmap.h>
#include <linux/of_address.h>
-#include <linux/bootmem.h>
#include <asm/cpu.h>
#include <trace/events/power.h>
@@ -55,41 +53,7 @@ u16 cpu_mask;
#define OMAP3PLUS_DPLL_FINT_MIN 32000
#define OMAP3PLUS_DPLL_FINT_MAX 52000000
-struct clk_iomap {
- struct regmap *regmap;
- void __iomem *mem;
-};
-
-static struct clk_iomap *clk_memmaps[CLK_MAX_MEMMAPS];
-
-static void clk_memmap_writel(u32 val, void __iomem *reg)
-{
- struct clk_omap_reg *r = (struct clk_omap_reg *)®
- struct clk_iomap *io = clk_memmaps[r->index];
-
- if (io->regmap)
- regmap_write(io->regmap, r->offset, val);
- else
- writel_relaxed(val, io->mem + r->offset);
-}
-
-static u32 clk_memmap_readl(void __iomem *reg)
-{
- u32 val;
- struct clk_omap_reg *r = (struct clk_omap_reg *)®
- struct clk_iomap *io = clk_memmaps[r->index];
-
- if (io->regmap)
- regmap_read(io->regmap, r->offset, &val);
- else
- val = readl_relaxed(io->mem + r->offset);
-
- return val;
-}
-
static struct ti_clk_ll_ops omap_clk_ll_ops = {
- .clk_readl = clk_memmap_readl,
- .clk_writel = clk_memmap_writel,
.clkdm_clk_enable = clkdm_clk_enable,
.clkdm_clk_disable = clkdm_clk_disable,
.cm_wait_module_ready = omap_cm_wait_module_ready,
@@ -109,54 +73,6 @@ int __init omap2_clk_setup_ll_ops(void)
return ti_clk_setup_ll_ops(&omap_clk_ll_ops);
}
-/**
- * omap2_clk_provider_init - initialize a clock provider
- * @match_table: DT device table to match for devices to init
- * @np: device node pointer for the this clock provider
- * @index: index for the clock provider
- + @syscon: syscon regmap pointer
- * @mem: iomem pointer for the clock provider memory area, only used if
- * syscon is not provided
- *
- * Initializes a clock provider module (CM/PRM etc.), registering
- * the memory mapping at specified index and initializing the
- * low level driver infrastructure. Returns 0 in success.
- */
-int __init omap2_clk_provider_init(struct device_node *np, int index,
- struct regmap *syscon, void __iomem *mem)
-{
- struct clk_iomap *io;
-
- io = kzalloc(sizeof(*io), GFP_KERNEL);
-
- io->regmap = syscon;
- io->mem = mem;
-
- clk_memmaps[index] = io;
-
- ti_dt_clk_init_provider(np, index);
-
- return 0;
-}
-
-/**
- * omap2_clk_legacy_provider_init - initialize a legacy clock provider
- * @index: index for the clock provider
- * @mem: iomem pointer for the clock provider memory area
- *
- * Initializes a legacy clock provider memory mapping.
- */
-void __init omap2_clk_legacy_provider_init(int index, void __iomem *mem)
-{
- struct clk_iomap *io;
-
- io = memblock_virt_alloc(sizeof(*io), 0);
-
- io->mem = mem;
-
- clk_memmaps[index] = io;
-}
-
/*
* OMAP2+ specific clock functions
*/
diff --git a/arch/arm/mach-omap2/clock.h b/arch/arm/mach-omap2/clock.h
index f3dc04c..67da640 100644
--- a/arch/arm/mach-omap2/clock.h
+++ b/arch/arm/mach-omap2/clock.h
@@ -75,11 +75,6 @@ extern const struct clkops clkops_omap2_dflt;
extern struct clk_functions omap2_clk_functions;
-struct regmap;
-
-int __init omap2_clk_provider_init(struct device_node *np, int index,
- struct regmap *syscon, void __iomem *mem);
-void __init omap2_clk_legacy_provider_init(int index, void __iomem *mem);
int __init omap2_clk_setup_ll_ops(void);
void __init ti_clk_init_features(void);
diff --git a/drivers/clk/ti/clk.c b/drivers/clk/ti/clk.c
index dc6b759..786ab59 100644
--- a/drivers/clk/ti/clk.c
+++ b/drivers/clk/ti/clk.c
@@ -21,6 +21,8 @@
#include <linux/of.h>
#include <linux/of_address.h>
#include <linux/list.h>
+#include <linux/regmap.h>
+#include <linux/bootmem.h>
#include "clock.h"
@@ -32,6 +34,38 @@ static struct device_node *clocks_node_ptr[CLK_MAX_MEMMAPS];
struct ti_clk_features ti_clk_features;
+struct clk_iomap {
+ struct regmap *regmap;
+ void __iomem *mem;
+};
+
+static struct clk_iomap *clk_memmaps[CLK_MAX_MEMMAPS];
+
+static void clk_memmap_writel(u32 val, void __iomem *reg)
+{
+ struct clk_omap_reg *r = (struct clk_omap_reg *)®
+ struct clk_iomap *io = clk_memmaps[r->index];
+
+ if (io->regmap)
+ regmap_write(io->regmap, r->offset, val);
+ else
+ writel_relaxed(val, io->mem + r->offset);
+}
+
+static u32 clk_memmap_readl(void __iomem *reg)
+{
+ u32 val;
+ struct clk_omap_reg *r = (struct clk_omap_reg *)®
+ struct clk_iomap *io = clk_memmaps[r->index];
+
+ if (io->regmap)
+ regmap_read(io->regmap, r->offset, &val);
+ else
+ val = readl_relaxed(io->mem + r->offset);
+
+ return val;
+}
+
/**
* ti_clk_setup_ll_ops - setup low level clock operations
* @ops: low level clock ops descriptor
@@ -49,6 +83,8 @@ int ti_clk_setup_ll_ops(struct ti_clk_ll_ops *ops)
}
ti_clk_ll_ops = ops;
+ ops->clk_readl = clk_memmap_readl;
+ ops->clk_writel = clk_memmap_writel;
return 0;
}
@@ -161,28 +197,61 @@ void __iomem *ti_clk_get_reg_addr(struct device_node *node, int index)
}
/**
- * ti_dt_clk_init_provider - init master clock provider
+ * omap2_clk_provider_init - init master clock provider
* @parent: master node
* @index: internal index for clk_reg_ops
+ * @syscon: syscon regmap pointer for accessing clock registers
+ * @mem: iomem pointer for the clock provider memory area, only used if
+ * syscon is not provided
*
* Initializes a master clock IP block. This basically sets up the
* mapping from clocks node to the memory map index. All the clocks
* are then initialized through the common of_clk_init call, and the
* clocks will access their memory maps based on the node layout.
+ * Returns 0 in success.
*/
-void ti_dt_clk_init_provider(struct device_node *parent, int index)
+int __init omap2_clk_provider_init(struct device_node *parent, int index,
+ struct regmap *syscon, void __iomem *mem)
{
struct device_node *clocks;
+ struct clk_iomap *io;
/* get clocks for this parent */
clocks = of_get_child_by_name(parent, "clocks");
if (!clocks) {
pr_err("%s missing 'clocks' child node.\n", parent->name);
- return;
+ return -EINVAL;
}
/* add clocks node info */
clocks_node_ptr[index] = clocks;
+
+ io = kzalloc(sizeof(*io), GFP_KERNEL);
+
+ io->regmap = syscon;
+ io->mem = mem;
+
+ clk_memmaps[index] = io;
+
+ return 0;
+}
+
+/**
+ * omap2_clk_legacy_provider_init - initialize a legacy clock provider
+ * @index: index for the clock provider
+ * @mem: iomem pointer for the clock provider memory area
+ *
+ * Initializes a legacy clock provider memory mapping.
+ */
+void __init omap2_clk_legacy_provider_init(int index, void __iomem *mem)
+{
+ struct clk_iomap *io;
+
+ io = memblock_virt_alloc(sizeof(*io), 0);
+
+ io->mem = mem;
+
+ clk_memmaps[index] = io;
}
/**
diff --git a/include/linux/clk/ti.h b/include/linux/clk/ti.h
index 267cca0..f183825 100644
--- a/include/linux/clk/ti.h
+++ b/include/linux/clk/ti.h
@@ -250,11 +250,16 @@ void omap2xxx_clkt_dpllcore_init(struct clk_hw *hw);
void omap2xxx_clkt_vps_init(void);
unsigned long omap2_get_dpll_rate(struct clk_hw_omap *clk);
-void ti_dt_clk_init_provider(struct device_node *np, int index);
void ti_dt_clk_init_retry_clks(void);
void ti_dt_clockdomains_setup(void);
int ti_clk_setup_ll_ops(struct ti_clk_ll_ops *ops);
+struct regmap;
+
+int omap2_clk_provider_init(struct device_node *parent, int index,
+ struct regmap *syscon, void __iomem *mem);
+void omap2_clk_legacy_provider_init(int index, void __iomem *mem);
+
int omap3430_dt_clk_init(void);
int omap3630_dt_clk_init(void);
int am35xx_dt_clk_init(void);
--
1.7.9.5
More information about the linux-arm-kernel
mailing list