[PATCH 4/6] ARM: dts: sunxi: add common sun8i dtsi
Hans de Goede
hdegoede at redhat.com
Sun May 10 01:52:38 PDT 2015
Hi,
On 10-05-15 08:46, Vishnu Patekar wrote:
> added the common sun8i.dtsi and "allwinner,sun8i" compatible for common
> sun8i features, I've referred the h3 dtsi by Jens Kuske.
> accordingly modified the sun8i-a23.dtsi and a23 dts.
>
> I don't have a23 device, however, dts got compiled.
>
> Signed-off-by: VishnuPatekar <vishnupatekar0510 at gmail.com>
Please edit ~/.gitconfig and add:
[diff]
renames = copies
And then resend this patch to make it easier to review what is
actually changing.
Thanks,
Hans
> ---
> arch/arm/boot/dts/sun8i-a23-ippo-q8h-v1.2.dts | 6 +-
> arch/arm/boot/dts/sun8i-a23-ippo-q8h-v5.dts | 6 +-
> arch/arm/boot/dts/sun8i-a23.dtsi | 432 +----------------------
> arch/arm/boot/dts/sun8i.dtsi | 481 ++++++++++++++++++++++++++
> 4 files changed, 486 insertions(+), 439 deletions(-)
> create mode 100644 arch/arm/boot/dts/sun8i.dtsi
>
> diff --git a/arch/arm/boot/dts/sun8i-a23-ippo-q8h-v1.2.dts b/arch/arm/boot/dts/sun8i-a23-ippo-q8h-v1.2.dts
> index dd31c53..b3f19e7 100644
> --- a/arch/arm/boot/dts/sun8i-a23-ippo-q8h-v1.2.dts
> +++ b/arch/arm/boot/dts/sun8i-a23-ippo-q8h-v1.2.dts
> @@ -16,10 +16,6 @@
> * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> * GNU General Public License for more details.
> *
> - * You should have received a copy of the GNU General Public
> - * License along with this file; if not, write to the Free
> - * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
> - * MA 02110-1301 USA
> *
> * Or, alternatively,
> *
> @@ -55,5 +51,5 @@
>
> / {
> model = "Ippo Q8H Dual Core Tablet (v1.2)";
> - compatible = "ippo,q8h-v1.2", "allwinner,sun8i-a23";
> + compatible = "ippo,q8h-v1.2", "allwinner,sun8i", "allwinner,sun8i-a23";
> };
> diff --git a/arch/arm/boot/dts/sun8i-a23-ippo-q8h-v5.dts b/arch/arm/boot/dts/sun8i-a23-ippo-q8h-v5.dts
> index f5658d1..5db4010 100644
> --- a/arch/arm/boot/dts/sun8i-a23-ippo-q8h-v5.dts
> +++ b/arch/arm/boot/dts/sun8i-a23-ippo-q8h-v5.dts
> @@ -18,10 +18,6 @@
> * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> * GNU General Public License for more details.
> *
> - * You should have received a copy of the GNU General Public
> - * License along with this file; if not, write to the Free
> - * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
> - * MA 02110-1301 USA
> *
> * Or, alternatively,
> *
> @@ -57,7 +53,7 @@
>
> / {
> model = "Ippo Q8H Dual Core Tablet (v5)";
> - compatible = "ippo,q8h-v5", "allwinner,sun8i-a23";
> + compatible = "ippo,q8h-v5", "allwinner,sun8i", "allwinner,sun8i-a23";
>
> aliases {
> serial0 = &r_uart;
> diff --git a/arch/arm/boot/dts/sun8i-a23.dtsi b/arch/arm/boot/dts/sun8i-a23.dtsi
> index 6d6eda3..c17be9e 100644
> --- a/arch/arm/boot/dts/sun8i-a23.dtsi
> +++ b/arch/arm/boot/dts/sun8i-a23.dtsi
> @@ -18,10 +18,6 @@
> * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> * GNU General Public License for more details.
> *
> - * You should have received a copy of the GNU General Public
> - * License along with this file; if not, write to the Free
> - * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
> - * MA 02110-1301 USA
> *
> * Or, alternatively,
> *
> @@ -47,41 +43,11 @@
> * OTHER DEALINGS IN THE SOFTWARE.
> */
>
> -#include "skeleton.dtsi"
> -
> -#include <dt-bindings/interrupt-controller/arm-gic.h>
> -
> -#include <dt-bindings/pinctrl/sun4i-a10.h>
> +#include "sun8i.dtsi"
>
> / {
> - interrupt-parent = <&gic>;
> -
> - chosen {
> - #address-cells = <1>;
> - #size-cells = <1>;
> - ranges;
> -
> - framebuffer at 0 {
> - compatible = "allwinner,simple-framebuffer",
> - "simple-framebuffer";
> - allwinner,pipeline = "de_be0-lcd0";
> - clocks = <&pll6 0>;
> - status = "disabled";
> - };
> - };
> -
> - timer {
> - compatible = "arm,armv7-timer";
> - interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
> - <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
> - <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
> - <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
> - clock-frequency = <24000000>;
> - arm,cpu-registers-not-fw-configured;
> - };
> -
> cpus {
> - enable-method = "allwinner,sun8i-a23";
> + enable-method = "allwinner,sun8i";
> #address-cells = <1>;
> #size-cells = <0>;
>
> @@ -103,32 +69,6 @@
> };
>
> clocks {
> - #address-cells = <1>;
> - #size-cells = <1>;
> - ranges;
> -
> - osc24M: osc24M_clk {
> - #clock-cells = <0>;
> - compatible = "fixed-clock";
> - clock-frequency = <24000000>;
> - clock-output-names = "osc24M";
> - };
> -
> - osc32k: osc32k_clk {
> - #clock-cells = <0>;
> - compatible = "fixed-clock";
> - clock-frequency = <32768>;
> - clock-output-names = "osc32k";
> - };
> -
> - pll1: clk at 01c20000 {
> - #clock-cells = <0>;
> - compatible = "allwinner,sun8i-a23-pll1-clk";
> - reg = <0x01c20000 0x4>;
> - clocks = <&osc24M>;
> - clock-output-names = "pll1";
> - };
> -
> /* dummy clock until actually implemented */
> pll5: pll5_clk {
> #clock-cells = <0>;
> @@ -137,29 +77,6 @@
> clock-output-names = "pll5";
> };
>
> - pll6: clk at 01c20028 {
> - #clock-cells = <1>;
> - compatible = "allwinner,sun6i-a31-pll6-clk";
> - reg = <0x01c20028 0x4>;
> - clocks = <&osc24M>;
> - clock-output-names = "pll6", "pll6x2";
> - };
> -
> - cpu: cpu_clk at 01c20050 {
> - #clock-cells = <0>;
> - compatible = "allwinner,sun4i-a10-cpu-clk";
> - reg = <0x01c20050 0x4>;
> -
> - /*
> - * PLL1 is listed twice here.
> - * While it looks suspicious, it's actually documented
> - * that way both in the datasheet and in the code from
> - * Allwinner.
> - */
> - clocks = <&osc32k>, <&osc24M>, <&pll1>, <&pll1>;
> - clock-output-names = "cpu";
> - };
> -
> axi: axi_clk at 01c20050 {
> #clock-cells = <0>;
> compatible = "allwinner,sun8i-a23-axi-clk";
> @@ -168,22 +85,6 @@
> clock-output-names = "axi";
> };
>
> - ahb1: ahb1_clk at 01c20054 {
> - #clock-cells = <0>;
> - compatible = "allwinner,sun6i-a31-ahb1-clk";
> - reg = <0x01c20054 0x4>;
> - clocks = <&osc32k>, <&osc24M>, <&axi>, <&pll6 0>;
> - clock-output-names = "ahb1";
> - };
> -
> - apb1: apb1_clk at 01c20054 {
> - #clock-cells = <0>;
> - compatible = "allwinner,sun4i-a10-apb0-clk";
> - reg = <0x01c20054 0x4>;
> - clocks = <&ahb1>;
> - clock-output-names = "apb1";
> - };
> -
> ahb1_gates: clk at 01c20060 {
> #clock-cells = <1>;
> compatible = "allwinner,sun8i-a23-ahb1-gates-clk";
> @@ -228,36 +129,6 @@
> "apb2_uart3", "apb2_uart4";
> };
>
> - mmc0_clk: clk at 01c20088 {
> - #clock-cells = <1>;
> - compatible = "allwinner,sun4i-a10-mmc-clk";
> - reg = <0x01c20088 0x4>;
> - clocks = <&osc24M>, <&pll6 0>;
> - clock-output-names = "mmc0",
> - "mmc0_output",
> - "mmc0_sample";
> - };
> -
> - mmc1_clk: clk at 01c2008c {
> - #clock-cells = <1>;
> - compatible = "allwinner,sun4i-a10-mmc-clk";
> - reg = <0x01c2008c 0x4>;
> - clocks = <&osc24M>, <&pll6 0>;
> - clock-output-names = "mmc1",
> - "mmc1_output",
> - "mmc1_sample";
> - };
> -
> - mmc2_clk: clk at 01c20090 {
> - #clock-cells = <1>;
> - compatible = "allwinner,sun4i-a10-mmc-clk";
> - reg = <0x01c20090 0x4>;
> - clocks = <&osc24M>, <&pll6 0>;
> - clock-output-names = "mmc2",
> - "mmc2_output",
> - "mmc2_sample";
> - };
> -
> mbus_clk: clk at 01c2015c {
> #clock-cells = <0>;
> compatible = "allwinner,sun8i-a23-mbus-clk";
> @@ -268,11 +139,6 @@
> };
>
> soc at 01c00000 {
> - compatible = "simple-bus";
> - #address-cells = <1>;
> - #size-cells = <1>;
> - ranges;
> -
> dma: dma-controller at 01c02000 {
> compatible = "allwinner,sun8i-a23-dma";
> reg = <0x01c02000 0x1000>;
> @@ -282,75 +148,12 @@
> #dma-cells = <1>;
> };
>
> - mmc0: mmc at 01c0f000 {
> - compatible = "allwinner,sun5i-a13-mmc";
> - reg = <0x01c0f000 0x1000>;
> - clocks = <&ahb1_gates 8>,
> - <&mmc0_clk 0>,
> - <&mmc0_clk 1>,
> - <&mmc0_clk 2>;
> - clock-names = "ahb",
> - "mmc",
> - "output",
> - "sample";
> - resets = <&ahb1_rst 8>;
> - reset-names = "ahb";
> - interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
> - status = "disabled";
> - #address-cells = <1>;
> - #size-cells = <0>;
> - };
> -
> - mmc1: mmc at 01c10000 {
> - compatible = "allwinner,sun5i-a13-mmc";
> - reg = <0x01c10000 0x1000>;
> - clocks = <&ahb1_gates 9>,
> - <&mmc1_clk 0>,
> - <&mmc1_clk 1>,
> - <&mmc1_clk 2>;
> - clock-names = "ahb",
> - "mmc",
> - "output",
> - "sample";
> - resets = <&ahb1_rst 9>;
> - reset-names = "ahb";
> - interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
> - status = "disabled";
> - #address-cells = <1>;
> - #size-cells = <0>;
> - };
> -
> - mmc2: mmc at 01c11000 {
> - compatible = "allwinner,sun5i-a13-mmc";
> - reg = <0x01c11000 0x1000>;
> - clocks = <&ahb1_gates 10>,
> - <&mmc2_clk 0>,
> - <&mmc2_clk 1>,
> - <&mmc2_clk 2>;
> - clock-names = "ahb",
> - "mmc",
> - "output",
> - "sample";
> - resets = <&ahb1_rst 10>;
> - reset-names = "ahb";
> - interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
> - status = "disabled";
> - #address-cells = <1>;
> - #size-cells = <0>;
> - };
> -
> pio: pinctrl at 01c20800 {
> compatible = "allwinner,sun8i-a23-pinctrl";
> - reg = <0x01c20800 0x400>;
> interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
> <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
> <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
> - clocks = <&apb1_gates 5>;
> - gpio-controller;
> - interrupt-controller;
> - #address-cells = <1>;
> - #size-cells = <0>;
> - #gpio-cells = <3>;
> +
>
> uart0_pins_a: uart0 at 0 {
> allwinner,pins = "PF2", "PF4";
> @@ -359,20 +162,6 @@
> allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
> };
>
> - mmc0_pins_a: mmc0 at 0 {
> - allwinner,pins = "PF0","PF1","PF2","PF3","PF4","PF5";
> - allwinner,function = "mmc0";
> - allwinner,drive = <SUN4I_PINCTRL_30_MA>;
> - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
> - };
> -
> - mmc1_pins_a: mmc1 at 0 {
> - allwinner,pins = "PG0","PG1","PG2","PG3","PG4","PG5";
> - allwinner,function = "mmc1";
> - allwinner,drive = <SUN4I_PINCTRL_30_MA>;
> - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
> - };
> -
> i2c0_pins_a: i2c0 at 0 {
> allwinner,pins = "PH2", "PH3";
> allwinner,function = "i2c0";
> @@ -395,38 +184,6 @@
> };
> };
>
> - ahb1_rst: reset at 01c202c0 {
> - #reset-cells = <1>;
> - compatible = "allwinner,sun6i-a31-clock-reset";
> - reg = <0x01c202c0 0xc>;
> - };
> -
> - apb1_rst: reset at 01c202d0 {
> - #reset-cells = <1>;
> - compatible = "allwinner,sun6i-a31-clock-reset";
> - reg = <0x01c202d0 0x4>;
> - };
> -
> - apb2_rst: reset at 01c202d8 {
> - #reset-cells = <1>;
> - compatible = "allwinner,sun6i-a31-clock-reset";
> - reg = <0x01c202d8 0x4>;
> - };
> -
> - timer at 01c20c00 {
> - compatible = "allwinner,sun4i-a10-timer";
> - reg = <0x01c20c00 0xa0>;
> - interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
> - clocks = <&osc24M>;
> - };
> -
> - wdt0: watchdog at 01c20ca0 {
> - compatible = "allwinner,sun6i-a31-wdt";
> - reg = <0x01c20ca0 0x20>;
> - interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
> - };
> -
> lradc: lradc at 01c22800 {
> compatible = "allwinner,sun4i-a10-lradc-keys";
> reg = <0x01c22800 0x100>;
> @@ -434,58 +191,6 @@
> status = "disabled";
> };
>
> - uart0: serial at 01c28000 {
> - compatible = "snps,dw-apb-uart";
> - reg = <0x01c28000 0x400>;
> - interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
> - reg-shift = <2>;
> - reg-io-width = <4>;
> - clocks = <&apb2_gates 16>;
> - resets = <&apb2_rst 16>;
> - dmas = <&dma 6>, <&dma 6>;
> - dma-names = "rx", "tx";
> - status = "disabled";
> - };
> -
> - uart1: serial at 01c28400 {
> - compatible = "snps,dw-apb-uart";
> - reg = <0x01c28400 0x400>;
> - interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
> - reg-shift = <2>;
> - reg-io-width = <4>;
> - clocks = <&apb2_gates 17>;
> - resets = <&apb2_rst 17>;
> - dmas = <&dma 7>, <&dma 7>;
> - dma-names = "rx", "tx";
> - status = "disabled";
> - };
> -
> - uart2: serial at 01c28800 {
> - compatible = "snps,dw-apb-uart";
> - reg = <0x01c28800 0x400>;
> - interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
> - reg-shift = <2>;
> - reg-io-width = <4>;
> - clocks = <&apb2_gates 18>;
> - resets = <&apb2_rst 18>;
> - dmas = <&dma 8>, <&dma 8>;
> - dma-names = "rx", "tx";
> - status = "disabled";
> - };
> -
> - uart3: serial at 01c28c00 {
> - compatible = "snps,dw-apb-uart";
> - reg = <0x01c28c00 0x400>;
> - interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
> - reg-shift = <2>;
> - reg-io-width = <4>;
> - clocks = <&apb2_gates 19>;
> - resets = <&apb2_rst 19>;
> - dmas = <&dma 9>, <&dma 9>;
> - dma-names = "rx", "tx";
> - status = "disabled";
> - };
> -
> uart4: serial at 01c29000 {
> compatible = "snps,dw-apb-uart";
> reg = <0x01c29000 0x400>;
> @@ -498,136 +203,5 @@
> dma-names = "rx", "tx";
> status = "disabled";
> };
> -
> - i2c0: i2c at 01c2ac00 {
> - compatible = "allwinner,sun6i-a31-i2c";
> - reg = <0x01c2ac00 0x400>;
> - interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
> - clocks = <&apb2_gates 0>;
> - resets = <&apb2_rst 0>;
> - status = "disabled";
> - #address-cells = <1>;
> - #size-cells = <0>;
> - };
> -
> - i2c1: i2c at 01c2b000 {
> - compatible = "allwinner,sun6i-a31-i2c";
> - reg = <0x01c2b000 0x400>;
> - interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
> - clocks = <&apb2_gates 1>;
> - resets = <&apb2_rst 1>;
> - status = "disabled";
> - #address-cells = <1>;
> - #size-cells = <0>;
> - };
> -
> - i2c2: i2c at 01c2b400 {
> - compatible = "allwinner,sun6i-a31-i2c";
> - reg = <0x01c2b400 0x400>;
> - interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
> - clocks = <&apb2_gates 2>;
> - resets = <&apb2_rst 2>;
> - status = "disabled";
> - #address-cells = <1>;
> - #size-cells = <0>;
> - };
> -
> - gic: interrupt-controller at 01c81000 {
> - compatible = "arm,cortex-a7-gic", "arm,cortex-a15-gic";
> - reg = <0x01c81000 0x1000>,
> - <0x01c82000 0x1000>,
> - <0x01c84000 0x2000>,
> - <0x01c86000 0x2000>;
> - interrupt-controller;
> - #interrupt-cells = <3>;
> - interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
> - };
> -
> - rtc: rtc at 01f00000 {
> - compatible = "allwinner,sun6i-a31-rtc";
> - reg = <0x01f00000 0x54>;
> - interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
> - };
> -
> - prcm at 01f01400 {
> - compatible = "allwinner,sun8i-a23-prcm";
> - reg = <0x01f01400 0x200>;
> -
> - ar100: ar100_clk {
> - compatible = "fixed-factor-clock";
> - #clock-cells = <0>;
> - clock-div = <1>;
> - clock-mult = <1>;
> - clocks = <&osc24M>;
> - clock-output-names = "ar100";
> - };
> -
> - ahb0: ahb0_clk {
> - compatible = "fixed-factor-clock";
> - #clock-cells = <0>;
> - clock-div = <1>;
> - clock-mult = <1>;
> - clocks = <&ar100>;
> - clock-output-names = "ahb0";
> - };
> -
> - apb0: apb0_clk {
> - compatible = "allwinner,sun8i-a23-apb0-clk";
> - #clock-cells = <0>;
> - clocks = <&ahb0>;
> - clock-output-names = "apb0";
> - };
> -
> - apb0_gates: apb0_gates_clk {
> - compatible = "allwinner,sun8i-a23-apb0-gates-clk";
> - #clock-cells = <1>;
> - clocks = <&apb0>;
> - clock-output-names = "apb0_pio", "apb0_timer",
> - "apb0_rsb", "apb0_uart",
> - "apb0_i2c";
> - };
> -
> - apb0_rst: apb0_rst {
> - compatible = "allwinner,sun6i-a31-clock-reset";
> - #reset-cells = <1>;
> - };
> - };
> -
> - cpucfg at 01f01c00 {
> - compatible = "allwinner,sun8i-a23-cpuconfig";
> - reg = <0x01f01c00 0x300>;
> - };
> -
> - r_uart: serial at 01f02800 {
> - compatible = "snps,dw-apb-uart";
> - reg = <0x01f02800 0x400>;
> - interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
> - reg-shift = <2>;
> - reg-io-width = <4>;
> - clocks = <&apb0_gates 4>;
> - resets = <&apb0_rst 4>;
> - status = "disabled";
> - };
> -
> - r_pio: pinctrl at 01f02c00 {
> - compatible = "allwinner,sun8i-a23-r-pinctrl";
> - reg = <0x01f02c00 0x400>;
> - interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
> - clocks = <&apb0_gates 0>;
> - resets = <&apb0_rst 0>;
> - gpio-controller;
> - interrupt-controller;
> - #address-cells = <1>;
> - #size-cells = <0>;
> - #gpio-cells = <3>;
> -
> - r_uart_pins_a: r_uart at 0 {
> - allwinner,pins = "PL2", "PL3";
> - allwinner,function = "s_uart";
> - allwinner,drive = <SUN4I_PINCTRL_10_MA>;
> - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
> - };
> - };
> };
> };
> diff --git a/arch/arm/boot/dts/sun8i.dtsi b/arch/arm/boot/dts/sun8i.dtsi
> new file mode 100644
> index 0000000..cf481e5
> --- /dev/null
> +++ b/arch/arm/boot/dts/sun8i.dtsi
> @@ -0,0 +1,481 @@
> +/*
> + * Copyright 2014 Chen-Yu Tsai
> + *
> + * Chen-Yu Tsai <wens at csie.org>
> + *
> + * This file is dual-licensed: you can use it either under the terms
> + * of the GPL or the X11 license, at your option. Note that this dual
> + * licensing only applies to this file, and not this project as a
> + * whole.
> + *
> + * a) This file is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License as
> + * published by the Free Software Foundation; either version 2 of the
> + * License, or (at your option) any later version.
> + *
> + * This file is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + *
> + * Or, alternatively,
> + *
> + * b) Permission is hereby granted, free of charge, to any person
> + * obtaining a copy of this software and associated documentation
> + * files (the "Software"), to deal in the Software without
> + * restriction, including without limitation the rights to use,
> + * copy, modify, merge, publish, distribute, sublicense, and/or
> + * sell copies of the Software, and to permit persons to whom the
> + * Software is furnished to do so, subject to the following
> + * conditions:
> + *
> + * The above copyright notice and this permission notice shall be
> + * included in all copies or substantial portions of the Software.
> + *
> + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
> + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
> + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
> + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
> + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
> + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
> + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
> + * OTHER DEALINGS IN THE SOFTWARE.
> + */
> +
> +#include "skeleton.dtsi"
> +
> +#include <dt-bindings/interrupt-controller/arm-gic.h>
> +
> +#include <dt-bindings/pinctrl/sun4i-a10.h>
> +
> +/ {
> + interrupt-parent = <&gic>;
> +
> + chosen {
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges;
> +
> + framebuffer at 0 {
> + compatible = "allwinner,simple-framebuffer",
> + "simple-framebuffer";
> + allwinner,pipeline = "de_be0-lcd0";
> + clocks = <&pll6 0>;
> + status = "disabled";
> + };
> + };
> +
> + timer {
> + compatible = "arm,armv7-timer";
> + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
> + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
> + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
> + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
> + clock-frequency = <24000000>;
> + arm,cpu-registers-not-fw-configured;
> + };
> +
> + clocks {
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges;
> +
> + osc24M: osc24M_clk {
> + #clock-cells = <0>;
> + compatible = "fixed-clock";
> + clock-frequency = <24000000>;
> + clock-output-names = "osc24M";
> + };
> +
> + osc32k: osc32k_clk {
> + #clock-cells = <0>;
> + compatible = "fixed-clock";
> + clock-frequency = <32768>;
> + clock-output-names = "osc32k";
> + };
> +
> + pll1: clk at 01c20000 {
> + #clock-cells = <0>;
> + compatible = "allwinner,sun8i-a23-pll1-clk";
> + reg = <0x01c20000 0x4>;
> + clocks = <&osc24M>;
> + clock-output-names = "pll1";
> + };
> +
> + pll6: clk at 01c20028 {
> + #clock-cells = <1>;
> + compatible = "allwinner,sun6i-a31-pll6-clk";
> + reg = <0x01c20028 0x4>;
> + clocks = <&osc24M>;
> + clock-output-names = "pll6", "pll6x2";
> + };
> +
> + cpu: cpu_clk at 01c20050 {
> + #clock-cells = <0>;
> + compatible = "allwinner,sun4i-a10-cpu-clk";
> + reg = <0x01c20050 0x4>;
> +
> + /*
> + * PLL1 is listed twice here.
> + * While it looks suspicious, it's actually documented
> + * that way both in the datasheet and in the code from
> + * Allwinner.
> + */
> + clocks = <&osc32k>, <&osc24M>, <&pll1>, <&pll1>;
> + clock-output-names = "cpu";
> + };
> +
> +
> + ahb1: ahb1_clk at 01c20054 {
> + #clock-cells = <0>;
> + compatible = "allwinner,sun6i-a31-ahb1-clk";
> + reg = <0x01c20054 0x4>;
> + clocks = <&osc32k>, <&osc24M>, <&axi>, <&pll6 0>;
> + clock-output-names = "ahb1";
> + };
> +
> + apb1: apb1_clk at 01c20054 {
> + #clock-cells = <0>;
> + compatible = "allwinner,sun4i-a10-apb0-clk";
> + reg = <0x01c20054 0x4>;
> + clocks = <&ahb1>;
> + clock-output-names = "apb1";
> + };
> +
> + mmc0_clk: clk at 01c20088 {
> + #clock-cells = <1>;
> + compatible = "allwinner,sun4i-a10-mmc-clk";
> + reg = <0x01c20088 0x4>;
> + clocks = <&osc24M>, <&pll6 0>;
> + clock-output-names = "mmc0",
> + "mmc0_output",
> + "mmc0_sample";
> + };
> +
> + mmc1_clk: clk at 01c2008c {
> + #clock-cells = <1>;
> + compatible = "allwinner,sun4i-a10-mmc-clk";
> + reg = <0x01c2008c 0x4>;
> + clocks = <&osc24M>, <&pll6 0>;
> + clock-output-names = "mmc1",
> + "mmc1_output",
> + "mmc1_sample";
> + };
> +
> + mmc2_clk: clk at 01c20090 {
> + #clock-cells = <1>;
> + compatible = "allwinner,sun4i-a10-mmc-clk";
> + reg = <0x01c20090 0x4>;
> + clocks = <&osc24M>, <&pll6 0>;
> + clock-output-names = "mmc2",
> + "mmc2_output",
> + "mmc2_sample";
> + };
> +
> + };
> +
> + soc at 01c00000 {
> + compatible = "simple-bus";
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges;
> +
> +
> + mmc0: mmc at 01c0f000 {
> + compatible = "allwinner,sun5i-a13-mmc";
> + reg = <0x01c0f000 0x1000>;
> + clocks = <&ahb1_gates 8>,
> + <&mmc0_clk 0>,
> + <&mmc0_clk 1>,
> + <&mmc0_clk 2>;
> + clock-names = "ahb",
> + "mmc",
> + "output",
> + "sample";
> + resets = <&ahb1_rst 8>;
> + reset-names = "ahb";
> + interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
> + status = "disabled";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + };
> +
> + mmc1: mmc at 01c10000 {
> + compatible = "allwinner,sun5i-a13-mmc";
> + reg = <0x01c10000 0x1000>;
> + clocks = <&ahb1_gates 9>,
> + <&mmc1_clk 0>,
> + <&mmc1_clk 1>,
> + <&mmc1_clk 2>;
> + clock-names = "ahb",
> + "mmc",
> + "output",
> + "sample";
> + resets = <&ahb1_rst 9>;
> + reset-names = "ahb";
> + interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
> + status = "disabled";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + };
> +
> + mmc2: mmc at 01c11000 {
> + compatible = "allwinner,sun5i-a13-mmc";
> + reg = <0x01c11000 0x1000>;
> + clocks = <&ahb1_gates 10>,
> + <&mmc2_clk 0>,
> + <&mmc2_clk 1>,
> + <&mmc2_clk 2>;
> + clock-names = "ahb",
> + "mmc",
> + "output",
> + "sample";
> + resets = <&ahb1_rst 10>;
> + reset-names = "ahb";
> + interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
> + status = "disabled";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + };
> +
> + pio: pinctrl at 01c20800 {
> + reg = <0x01c20800 0x400>;
> + clocks = <&apb1_gates 5>;
> + gpio-controller;
> + interrupt-controller;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + #gpio-cells = <3>;
> +
> + mmc0_pins_a: mmc0 at 0 {
> + allwinner,pins = "PF0","PF1","PF2","PF3","PF4","PF5";
> + allwinner,function = "mmc0";
> + allwinner,drive = <SUN4I_PINCTRL_30_MA>;
> + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
> + };
> +
> + mmc1_pins_a: mmc1 at 0 {
> + allwinner,pins = "PG0","PG1","PG2","PG3","PG4","PG5";
> + allwinner,function = "mmc1";
> + allwinner,drive = <SUN4I_PINCTRL_30_MA>;
> + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
> + };
> + };
> +
> + ahb1_rst: reset at 01c202c0 {
> + #reset-cells = <1>;
> + compatible = "allwinner,sun6i-a31-clock-reset";
> + reg = <0x01c202c0 0xc>;
> + };
> +
> + apb1_rst: reset at 01c202d0 {
> + #reset-cells = <1>;
> + compatible = "allwinner,sun6i-a31-clock-reset";
> + reg = <0x01c202d0 0x4>;
> + };
> +
> + apb2_rst: reset at 01c202d8 {
> + #reset-cells = <1>;
> + compatible = "allwinner,sun6i-a31-clock-reset";
> + reg = <0x01c202d8 0x4>;
> + };
> +
> + timer at 01c20c00 {
> + compatible = "allwinner,sun4i-a10-timer";
> + reg = <0x01c20c00 0xa0>;
> + interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&osc24M>;
> + };
> +
> + wdt0: watchdog at 01c20ca0 {
> + compatible = "allwinner,sun6i-a31-wdt";
> + reg = <0x01c20ca0 0x20>;
> + interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
> + };
> +
> + uart0: serial at 01c28000 {
> + compatible = "snps,dw-apb-uart";
> + reg = <0x01c28000 0x400>;
> + interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
> + reg-shift = <2>;
> + reg-io-width = <4>;
> + clocks = <&apb2_gates 16>;
> + resets = <&apb2_rst 16>;
> + dmas = <&dma 6>, <&dma 6>;
> + dma-names = "rx", "tx";
> + status = "disabled";
> + };
> +
> + uart1: serial at 01c28400 {
> + compatible = "snps,dw-apb-uart";
> + reg = <0x01c28400 0x400>;
> + interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
> + reg-shift = <2>;
> + reg-io-width = <4>;
> + clocks = <&apb2_gates 17>;
> + resets = <&apb2_rst 17>;
> + dmas = <&dma 7>, <&dma 7>;
> + dma-names = "rx", "tx";
> + status = "disabled";
> + };
> +
> + uart2: serial at 01c28800 {
> + compatible = "snps,dw-apb-uart";
> + reg = <0x01c28800 0x400>;
> + interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
> + reg-shift = <2>;
> + reg-io-width = <4>;
> + clocks = <&apb2_gates 18>;
> + resets = <&apb2_rst 18>;
> + dmas = <&dma 8>, <&dma 8>;
> + dma-names = "rx", "tx";
> + status = "disabled";
> + };
> +
> + uart3: serial at 01c28c00 {
> + compatible = "snps,dw-apb-uart";
> + reg = <0x01c28c00 0x400>;
> + interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
> + reg-shift = <2>;
> + reg-io-width = <4>;
> + clocks = <&apb2_gates 19>;
> + resets = <&apb2_rst 19>;
> + dmas = <&dma 9>, <&dma 9>;
> + dma-names = "rx", "tx";
> + status = "disabled";
> + };
> +
> + i2c0: i2c at 01c2ac00 {
> + compatible = "allwinner,sun6i-a31-i2c";
> + reg = <0x01c2ac00 0x400>;
> + interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&apb2_gates 0>;
> + resets = <&apb2_rst 0>;
> + status = "disabled";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + };
> +
> + i2c1: i2c at 01c2b000 {
> + compatible = "allwinner,sun6i-a31-i2c";
> + reg = <0x01c2b000 0x400>;
> + interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&apb2_gates 1>;
> + resets = <&apb2_rst 1>;
> + status = "disabled";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + };
> +
> + i2c2: i2c at 01c2b400 {
> + compatible = "allwinner,sun6i-a31-i2c";
> + reg = <0x01c2b400 0x400>;
> + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&apb2_gates 2>;
> + resets = <&apb2_rst 2>;
> + status = "disabled";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + };
> +
> + gic: interrupt-controller at 01c81000 {
> + compatible = "arm,cortex-a7-gic", "arm,cortex-a15-gic";
> + reg = <0x01c81000 0x1000>,
> + <0x01c82000 0x1000>,
> + <0x01c84000 0x2000>,
> + <0x01c86000 0x2000>;
> + interrupt-controller;
> + #interrupt-cells = <3>;
> + interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
> + };
> +
> + rtc: rtc at 01f00000 {
> + compatible = "allwinner,sun6i-a31-rtc";
> + reg = <0x01f00000 0x54>;
> + interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
> + };
> +
> + prcm at 01f01400 {
> + compatible = "allwinner,sun8i-a23-prcm";
> + reg = <0x01f01400 0x200>;
> +
> + ar100: ar100_clk {
> + compatible = "fixed-factor-clock";
> + #clock-cells = <0>;
> + clock-div = <1>;
> + clock-mult = <1>;
> + clocks = <&osc24M>;
> + clock-output-names = "ar100";
> + };
> +
> + ahb0: ahb0_clk {
> + compatible = "fixed-factor-clock";
> + #clock-cells = <0>;
> + clock-div = <1>;
> + clock-mult = <1>;
> + clocks = <&ar100>;
> + clock-output-names = "ahb0";
> + };
> +
> + apb0: apb0_clk {
> + compatible = "allwinner,sun8i-a23-apb0-clk";
> + #clock-cells = <0>;
> + clocks = <&ahb0>;
> + clock-output-names = "apb0";
> + };
> +
> + apb0_gates: apb0_gates_clk {
> + compatible = "allwinner,sun8i-a23-apb0-gates-clk";
> + #clock-cells = <1>;
> + clocks = <&apb0>;
> + clock-output-names = "apb0_pio", "apb0_timer",
> + "apb0_rsb", "apb0_uart",
> + "apb0_i2c";
> + };
> +
> + apb0_rst: apb0_rst {
> + compatible = "allwinner,sun6i-a31-clock-reset";
> + #reset-cells = <1>;
> + };
> + };
> +
> + cpucfg at 01f01c00 {
> + compatible = "allwinner,sun8i-a23-cpuconfig";
> + reg = <0x01f01c00 0x300>;
> + };
> +
> + r_uart: serial at 01f02800 {
> + compatible = "snps,dw-apb-uart";
> + reg = <0x01f02800 0x400>;
> + interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
> + reg-shift = <2>;
> + reg-io-width = <4>;
> + clocks = <&apb0_gates 4>;
> + resets = <&apb0_rst 4>;
> + status = "disabled";
> + };
> +
> + r_pio: pinctrl at 01f02c00 {
> + compatible = "allwinner,sun8i-a23-r-pinctrl";
> + reg = <0x01f02c00 0x400>;
> + interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&apb0_gates 0>;
> + resets = <&apb0_rst 0>;
> + gpio-controller;
> + interrupt-controller;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + #gpio-cells = <3>;
> +
> + r_uart_pins_a: r_uart at 0 {
> + allwinner,pins = "PL2", "PL3";
> + allwinner,function = "s_uart";
> + allwinner,drive = <SUN4I_PINCTRL_10_MA>;
> + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
> + };
> + };
> + };
> +};
>
More information about the linux-arm-kernel
mailing list