[PATCH 2/4] soc: Mediatek: Add SCPSYS power domain driver
Matthias Brugger
matthias.bgg at gmail.com
Fri May 8 08:51:55 PDT 2015
2015-05-08 14:51 GMT+02:00 Sascha Hauer <s.hauer at pengutronix.de>:
> On Fri, May 08, 2015 at 02:28:37PM +0200, Matthias Brugger wrote:
>> 2015-05-08 14:19 GMT+02:00 Sascha Hauer <s.hauer at pengutronix.de>:
>> > On Fri, May 08, 2015 at 02:16:06PM +0200, Matthias Brugger wrote:
>> >> 2015-03-10 16:41 GMT+01:00 Sascha Hauer <s.hauer at pengutronix.de>:
>> >> > +static int scpsys_power_on(struct generic_pm_domain *genpd)
>> >> > +{
>> >> > + struct scp_domain *scpd = container_of(genpd, struct scp_domain, pmd);
>> >> > + struct scp *scp = scpd->scp;
>> >> > + struct scp_domain_data *data = scpd->data;
>> >> > + unsigned long expired;
>> >> > + void __iomem *ctl_addr = scpd->scp->base + data->ctl_offs;
>> >> > + u32 sram_pdn_ack = data->sram_pdn_ack_bits;
>> >> > + u32 val;
>> >> > + int ret;
>> >> > +
>> >> > + val = readl(ctl_addr);
>> >> > + val |= PWR_ON_BIT;
>> >> > + writel(val, ctl_addr);
>> >> > + val |= PWR_ON_2ND_BIT;
>> >> > + writel(val, ctl_addr);
>> >> > +
>> >> > + /* wait until PWR_ACK = 1 */
>> >> > + expired = jiffies + HZ;
>> >> > + while (!(readl(scp->base + SPM_PWR_STATUS) & data->sta_mask) ||
>> >> > + !(readl(scp->base + SPM_PWR_STATUS_2ND) & data->sta_mask)) {
>> >> > + cpu_relax();
>> >> > + if (time_after(jiffies, expired)) {
>> >> > + ret = -EIO;
>> >> > + goto out;
>> >> > + }
>> >> > + }
>> >> > +
>> >> > + val &= ~PWR_CLK_DIS_BIT;
>> >> > + writel(val, ctl_addr);
>> >> > +
>> >> > + val &= ~PWR_ISO_BIT;
>> >> > + writel(val, ctl_addr);
>> >> > +
>> >> > + val |= PWR_RST_B_BIT;
>> >> > + writel(val, ctl_addr);
>> >> > +
>> >> > + val &= ~data->sram_pdn_bits;
>> >> > + writel(val, ctl_addr);
>> >> > +
>> >> > + /* wait until SRAM_PDN_ACK all 0 */
>> >> > + expired = jiffies + HZ;
>> >> > + while (sram_pdn_ack && (readl(ctl_addr) & sram_pdn_ack)) {
>> >>
>> >> I think "sram_pdn_ack &&" was added accidently here. It is always
>> >> bigger then zero.
>> >
>> > Nope, it's zero for MT8173_POWER_DOMAIN_MFG_ASYNC.
>>
>> In probe you turn on all power domains defined in scp_domain_data[].
>> So all but MT8173_POWER_DOMAIN_MFG_ASYNC will fail.
>> Does this make sense?
>
> What makes you think that enabling the domains will fail? That doesn't
> happen.
You are right, I got confused, seems to be the friday-effect.
Sorry for the noise.
--
motzblog.wordpress.com
More information about the linux-arm-kernel
mailing list