[PATCH 5/5] VFIO: platform: VFIO platform Calxeda xgmac reset module
Eric Auger
eric.auger at linaro.org
Thu May 7 07:27:23 PDT 2015
This patch introduces a module that registers and implements a basic
reset function for the Calxeda xgmac device. This latter basically disables
interrupts and stops DMA transfers.
The reset function code is inherited from the native calxeda xgmac driver.
Signed-off-by: Eric Auger <eric.auger at linaro.org>
---
drivers/vfio/platform/Kconfig | 2 +
drivers/vfio/platform/Makefile | 2 +
drivers/vfio/platform/reset/Kconfig | 7 ++
drivers/vfio/platform/reset/Makefile | 5 +
.../platform/reset/vfio_platform_calxedaxgmac.c | 121 +++++++++++++++++++++
5 files changed, 137 insertions(+)
create mode 100644 drivers/vfio/platform/reset/Kconfig
create mode 100644 drivers/vfio/platform/reset/Makefile
create mode 100644 drivers/vfio/platform/reset/vfio_platform_calxedaxgmac.c
diff --git a/drivers/vfio/platform/Kconfig b/drivers/vfio/platform/Kconfig
index 9a4403e..1df7477 100644
--- a/drivers/vfio/platform/Kconfig
+++ b/drivers/vfio/platform/Kconfig
@@ -18,3 +18,5 @@ config VFIO_AMBA
framework.
If you don't know what to do here, say N.
+
+source "drivers/vfio/platform/reset/Kconfig"
diff --git a/drivers/vfio/platform/Makefile b/drivers/vfio/platform/Makefile
index 81de144..9ce8afe 100644
--- a/drivers/vfio/platform/Makefile
+++ b/drivers/vfio/platform/Makefile
@@ -2,7 +2,9 @@
vfio-platform-y := vfio_platform.o vfio_platform_common.o vfio_platform_irq.o
obj-$(CONFIG_VFIO_PLATFORM) += vfio-platform.o
+obj-$(CONFIG_VFIO_PLATFORM) += reset/
vfio-amba-y := vfio_amba.o
obj-$(CONFIG_VFIO_AMBA) += vfio-amba.o
+obj-$(CONFIG_VFIO_AMBA) += reset/
diff --git a/drivers/vfio/platform/reset/Kconfig b/drivers/vfio/platform/reset/Kconfig
new file mode 100644
index 0000000..746b96b
--- /dev/null
+++ b/drivers/vfio/platform/reset/Kconfig
@@ -0,0 +1,7 @@
+config VFIO_PLATFORM_CALXEDAXGMAC_RESET
+ tristate "VFIO support for calxeda xgmac reset"
+ depends on VFIO_PLATFORM
+ help
+ Enables the VFIO platform driver to handle reset for Calxeda xgmac
+
+ If you don't know what to do here, say N.
diff --git a/drivers/vfio/platform/reset/Makefile b/drivers/vfio/platform/reset/Makefile
new file mode 100644
index 0000000..2a486af
--- /dev/null
+++ b/drivers/vfio/platform/reset/Makefile
@@ -0,0 +1,5 @@
+vfio-platform-calxedaxgmac-y := vfio_platform_calxedaxgmac.o
+
+ccflags-y += -Idrivers/vfio/platform
+
+obj-$(CONFIG_VFIO_PLATFORM_CALXEDAXGMAC_RESET) += vfio-platform-calxedaxgmac.o
diff --git a/drivers/vfio/platform/reset/vfio_platform_calxedaxgmac.c b/drivers/vfio/platform/reset/vfio_platform_calxedaxgmac.c
new file mode 100644
index 0000000..3c6e428
--- /dev/null
+++ b/drivers/vfio/platform/reset/vfio_platform_calxedaxgmac.c
@@ -0,0 +1,121 @@
+/*
+ * VFIO platform driver specialized for Calxeda xgmac reset
+ * reset code is inherited from calxeda xgmac native driver
+ *
+ * Copyright 2010-2011 Calxeda, Inc.
+ * Copyright (c) 2015 Linaro Ltd.
+ * www.linaro.org
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/io.h>
+
+#include "vfio_platform_private.h"
+
+#define DRIVER_VERSION "0.1"
+#define DRIVER_AUTHOR "Eric Auger <eric.auger at linaro.org>"
+#define DRIVER_DESC "Reset support for Calxeda xgmac vfio platform device"
+
+#define CALXEDAXGMAC_COMPAT "calxeda,hb-xgmac"
+
+/* XGMAC Register definitions */
+#define XGMAC_CONTROL 0x00000000 /* MAC Configuration */
+
+/* DMA Control and Status Registers */
+#define XGMAC_DMA_CONTROL 0x00000f18 /* Ctrl (Operational Mode) */
+#define XGMAC_DMA_INTR_ENA 0x00000f1c /* Interrupt Enable */
+
+/* DMA Control registe defines */
+#define DMA_CONTROL_ST 0x00002000 /* Start/Stop Transmission */
+#define DMA_CONTROL_SR 0x00000002 /* Start/Stop Receive */
+
+/* Common MAC defines */
+#define MAC_ENABLE_TX 0x00000008 /* Transmitter Enable */
+#define MAC_ENABLE_RX 0x00000004 /* Receiver Enable */
+
+static inline void xgmac_mac_disable(void __iomem *ioaddr)
+{
+ u32 value = readl(ioaddr + XGMAC_DMA_CONTROL);
+
+ value &= ~(DMA_CONTROL_ST | DMA_CONTROL_SR);
+ writel(value, ioaddr + XGMAC_DMA_CONTROL);
+
+ value = readl(ioaddr + XGMAC_CONTROL);
+ value &= ~(MAC_ENABLE_TX | MAC_ENABLE_RX);
+ writel(value, ioaddr + XGMAC_CONTROL);
+}
+
+int vfio_platform_calxedaxgmac_reset(struct vfio_platform_device *vdev)
+{
+ struct vfio_platform_region reg = vdev->regions[0];
+
+ if (!reg.ioaddr) {
+ reg.ioaddr =
+ ioremap_nocache(reg.addr, reg.size);
+ if (!reg.ioaddr)
+ return -ENOMEM;
+ }
+
+ /* disable IRQ */
+ writel(0, reg.ioaddr + XGMAC_DMA_INTR_ENA);
+
+ /* Disable the MAC core */
+ xgmac_mac_disable(reg.ioaddr);
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(vfio_platform_calxedaxgmac_reset);
+
+static int __init vfio_platform_calxedaxgmac_init(void)
+{
+ int (*register_reset)(char *, struct module *,
+ vfio_platform_reset_fn_t);
+ int ret;
+
+ register_reset = symbol_get(vfio_platform_register_reset);
+ if (!register_reset)
+ return -EINVAL;
+
+ ret = register_reset(CALXEDAXGMAC_COMPAT, THIS_MODULE,
+ vfio_platform_calxedaxgmac_reset);
+
+ symbol_put(vfio_platform_register_reset);
+
+ return ret;
+}
+
+static void __exit vfio_platform_calxedaxgmac_exit(void)
+{
+ int (*unregister_reset)(char *);
+ int ret;
+
+ unregister_reset = symbol_get(vfio_platform_unregister_reset);
+ if (!unregister_reset)
+ return;
+
+ ret = unregister_reset(CALXEDAXGMAC_COMPAT);
+
+ symbol_put(vfio_platform_unregister_reset);
+}
+
+module_init(vfio_platform_calxedaxgmac_init);
+module_exit(vfio_platform_calxedaxgmac_exit);
+
+MODULE_VERSION(DRIVER_VERSION);
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR(DRIVER_AUTHOR);
+MODULE_DESCRIPTION(DRIVER_DESC);
--
1.9.1
More information about the linux-arm-kernel
mailing list