[PATCH v4 0/7] Basic support to ZTE ZX296702
Jun Nie
jun.nie at linaro.org
Wed May 6 18:34:22 PDT 2015
On 2015年04月28日 17:18, Jun Nie wrote:
> Rebase patches of v2 to 4.0-rc1. Ready for merge.
Hi Arnd,
Do you see any issue in this patch set? Or could you help drive merge?
Thank you very much!
Jun
> Change in v4 vs v3: Fix minor defconfig issue.
>
> Jun Nie (7):
> ARM: zx: add basic support for ZTE ZX296702
> MAINTAINERS: add entry for ARM ZTE architecture
> ARM: zx: add low level debug support for zx296702
> ARM: dts: zx: add an initial zx296702 dts and doc
> clk: zx: add clock support to zx296702
> ARM: zx: enable SMP and hotplug for zx296702
> ARM: zx: Add basic defconfig support for ZX296702
>
> Documentation/devicetree/bindings/arm/zte.txt | 15 +
> .../devicetree/bindings/clock/zx296702-clk.txt | 35 ++
> Documentation/devicetree/bindings/serial/pl011.txt | 2 +-
> .../devicetree/bindings/vendor-prefixes.txt | 1 +
> MAINTAINERS | 9 +
> arch/arm/Kconfig | 2 +
> arch/arm/Kconfig.debug | 14 +
> arch/arm/Makefile | 1 +
> arch/arm/boot/dts/Makefile | 1 +
> arch/arm/boot/dts/zx296702-ad1.dts | 48 ++
> arch/arm/boot/dts/zx296702.dtsi | 139 +++++
> arch/arm/configs/zx_defconfig | 130 ++++
> arch/arm/include/debug/pl01x.S | 7 +
> arch/arm/mach-zx/Kconfig | 18 +
> arch/arm/mach-zx/Makefile | 2 +
> arch/arm/mach-zx/core.h | 19 +
> arch/arm/mach-zx/headsmp.S | 32 +
> arch/arm/mach-zx/platsmp.c | 189 ++++++
> arch/arm/mach-zx/zx296702.c | 31 +
> drivers/clk/Makefile | 1 +
> drivers/clk/zte/Makefile | 2 +
> drivers/clk/zte/clk-pll.c | 180 ++++++
> drivers/clk/zte/clk-zx296702.c | 658 +++++++++++++++++++++
> drivers/clk/zte/clk.h | 30 +
> include/dt-bindings/clock/zx296702-clock.h | 162 +++++
> 25 files changed, 1727 insertions(+), 1 deletion(-)
> create mode 100644 Documentation/devicetree/bindings/arm/zte.txt
> create mode 100644 Documentation/devicetree/bindings/clock/zx296702-clk.txt
> create mode 100644 arch/arm/boot/dts/zx296702-ad1.dts
> create mode 100644 arch/arm/boot/dts/zx296702.dtsi
> create mode 100644 arch/arm/configs/zx_defconfig
> create mode 100644 arch/arm/mach-zx/Kconfig
> create mode 100644 arch/arm/mach-zx/Makefile
> create mode 100644 arch/arm/mach-zx/core.h
> create mode 100644 arch/arm/mach-zx/headsmp.S
> create mode 100644 arch/arm/mach-zx/platsmp.c
> create mode 100644 arch/arm/mach-zx/zx296702.c
> create mode 100644 drivers/clk/zte/Makefile
> create mode 100644 drivers/clk/zte/clk-pll.c
> create mode 100644 drivers/clk/zte/clk-zx296702.c
> create mode 100644 drivers/clk/zte/clk.h
> create mode 100644 include/dt-bindings/clock/zx296702-clock.h
>
More information about the linux-arm-kernel
mailing list