[PATCH 2/2] ARM: dts: am4372: Add emif node

Dave Gerlach d-gerlach at ti.com
Wed May 6 10:25:33 PDT 2015


Add node for TI AM4372 EMIF.

Signed-off-by: Dave Gerlach <d-gerlach at ti.com>
---
 Documentation/devicetree/bindings/memory-controllers/ti/emif.txt | 1 +
 arch/arm/boot/dts/am4372.dtsi                                    | 6 ++++++
 2 files changed, 7 insertions(+)

diff --git a/Documentation/devicetree/bindings/memory-controllers/ti/emif.txt b/Documentation/devicetree/bindings/memory-controllers/ti/emif.txt
index 938f8e1..0db6047 100644
--- a/Documentation/devicetree/bindings/memory-controllers/ti/emif.txt
+++ b/Documentation/devicetree/bindings/memory-controllers/ti/emif.txt
@@ -8,6 +8,7 @@ of the EMIF IP and memory parts attached to it.
 Required properties:
 - compatible	: Should be of the form "ti,emif-<ip-rev>" where <ip-rev>
   is the IP revision of the specific EMIF instance.
+		  For am437x should be ti,emif-am4372.
 
 - phy-type	: <u32> indicating the DDR phy type. Following are the
   allowed values
diff --git a/arch/arm/boot/dts/am4372.dtsi b/arch/arm/boot/dts/am4372.dtsi
index c80a3e2..9521a38 100644
--- a/arch/arm/boot/dts/am4372.dtsi
+++ b/arch/arm/boot/dts/am4372.dtsi
@@ -132,6 +132,12 @@
 			};
 		};
 
+		emif: emif at 4c000000 {
+			compatible = "ti,emif-am4372";
+			reg = <0x4c000000 0x1000000>;
+			ti,hwmods = "emif";
+		};
+
 		edma: edma at 49000000 {
 			compatible = "ti,edma3";
 			ti,hwmods = "tpcc", "tptc0", "tptc1", "tptc2";
-- 
2.3.6




More information about the linux-arm-kernel mailing list