[PATCH] ARM: dts: imx6qdl-hummingboard: Add PCIe support

[Fabio Estevam]

Hi Jon,

On Wed, May 6, 2015 at 8:04 AM, Jon Nettleton <jon.nettleton at gmail.com> wrote:

> That patch is fine.  In the SolidRun kernel we are actually using
> 0x80000000 as our pin strength to accept the default value, but I have
> previously tested with 0x1b0b1 and it works as expected.

Yes, putting 0x80000000 or 0x1b0b1 has the same effect as 0x1b0b1 is
the default PAD configuration that comes out of reset. I prefer to
pass the value explicitly though.

I tested it with an Intel 7260HMW Wifi card and it worked well.

Regards,

Fabio Estevam