[PATCH 0/2] ARM: AM43xx: PRM: fix reset handling issues

[Dave Gerlach]

Tero,
On 05/05/2015 08:33 AM, Tero Kristo wrote:
> Hi,
> 
> The work done for consolidating PRM code introduced a reset issue
> on AM43xx which is visible at least with wkup-m3, and prevents
> taking the wkup-m3 core out from reset. Fixed by passing all the
> relevant PRCM data from hwmod data, which was previously partly
> omitted on OMAP4+ case.
> 
> This set also removes some redundant AM33xx hwmod code and just
> re-uses the OMAP4+ version of the same.
> 
> Thanks to Dave Gerlach and Anna Suman for reporting this. Dave, care
> to give this patch set a try to see if it fixes the problem you see?
> 

Thanks for fixing this up, I swapped these patches for my reset patch on my
suspend branch [1] and tested the following:

am335x-gp-evm: boot and firmware loaded, suspend/resume multiple cycles
am437x-gp-evm: boot and firmware loaded, suspend/resume multiple cycles

Patches look fine to me.

Regards,
Dave

[1] https://github.com/dgerlach/linux-pm/tree/pm-ds0-v4.1-rc1-WIP

> Testing done:
> - am335x-bone: boot
> - am437x-gp-evm: boot
> - omap4-panda-es: boot, suspend/resume, cpuidle
> 
> -Tero
>