[PATCH 02/12] net: axienet: Handle 0 packet receive gracefully
Michal Simek
michal.simek at xilinx.com
Tue May 5 02:25:55 PDT 2015
From: Peter Crosthwaite <peter.crosthwaite at xilinx.com>
The AXI-DMA rx-delay interrupt can sometimes be triggered
when there are 0 outstanding packets received. This is due
to the fact that the receive function will greedily consume
as many packets as possible on interrupt. So if two packets
(with a very particular timing) arrive in succession they
will each cause the rx-delay interrupt, but the first interrupt
will consume both packets.
This means the second interrupt is a 0 packet receive.
This is mostly OK, except that the tail pointer register is
updated unconditionally on receive. Currently the tail pointer
is always set to the current bd-ring descriptor under
the assumption that the hardware has moved onto the next
descriptor. What this means for length 0 recv is the current
descriptor that the hardware is potentially yet to use will
be marked as the tail. This causes the hardware to think
its run out of descriptors deadlocking the whole rx path.
Fixed by updating the tail pointer to the most recent
successfully consumed descriptor.
Reported-by: Wendy Liang <wendy.liang at xilinx.com>
Signed-off-by: Peter Crosthwaite <peter.crosthwaite at xilinx.com>
Tested-by: Jason Wu <huanyu at xilinx.com>
Acked-by: Michal Simek <michal.simek at xilinx.com>
Signed-off-by: Michal Simek <michal.simek at xilinx.com>
---
drivers/net/ethernet/xilinx/xilinx_axienet_main.c | 7 ++++---
1 file changed, 4 insertions(+), 3 deletions(-)
diff --git a/drivers/net/ethernet/xilinx/xilinx_axienet_main.c b/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
index 0ab607732bb4..a4840952d372 100644
--- a/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
+++ b/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
@@ -726,15 +726,15 @@ static void axienet_recv(struct net_device *ndev)
u32 csumstatus;
u32 size = 0;
u32 packets = 0;
- dma_addr_t tail_p;
+ dma_addr_t tail_p = 0;
struct axienet_local *lp = netdev_priv(ndev);
struct sk_buff *skb, *new_skb;
struct axidma_bd *cur_p;
- tail_p = lp->rx_bd_p + sizeof(*lp->rx_bd_v) * lp->rx_bd_ci;
cur_p = &lp->rx_bd_v[lp->rx_bd_ci];
while ((cur_p->status & XAXIDMA_BD_STS_COMPLETE_MASK)) {
+ tail_p = lp->rx_bd_p + sizeof(*lp->rx_bd_v) * lp->rx_bd_ci;
skb = (struct sk_buff *) (cur_p->sw_id_offset);
length = cur_p->app4 & 0x0000FFFF;
@@ -786,7 +786,8 @@ static void axienet_recv(struct net_device *ndev)
ndev->stats.rx_packets += packets;
ndev->stats.rx_bytes += size;
- axienet_dma_out32(lp, XAXIDMA_RX_TDESC_OFFSET, tail_p);
+ if (tail_p)
+ axienet_dma_out32(lp, XAXIDMA_RX_TDESC_OFFSET, tail_p);
}
/**
--
2.3.5
More information about the linux-arm-kernel
mailing list