EDMA oftree entry for AM335x
Tony Lindgren
tony at atomide.com
Mon May 4 14:24:57 PDT 2015
* Robert Schwebel <r.schwebel at pengutronix.de> [150504 14:13]:
> Hi Tony,
>
> On Mon, May 04, 2015 at 07:11:03AM -0700, Tony Lindgren wrote:
> > Adding Peter to Cc as well.
>
> You didn't :)
Trying again :)
> > > The patch description says the device should be split into more devices instead
> > > of specifying several ti,hwmods entries, but unfortunately the Documentation
> > > still suggests the above format in Documentation/devicetree/bindings/dma/ti-edma.txt.
> > >
> > > How would a correct entry look like?
> >
> > Each tptc instance has it's own sysconfig register. This means each
> > one of them can be clocked and idled independently. They should be
> > treated as separate device instances. I believe the interrupts all
> > belong to the tpcc, which should be also treated as a separate
> > device instance.
> >
> > In order to get rid of the ti,hwmods property, we want to have a
> > 1-1-1 mapping of the compatible property, ti,hwmod property, and
> > the device entry.
> >
> > Looking at the TRM "Table 2-1. L3 Memory Map", these all are on
> > the L3, so they should be like this for now (assuming the
> > interrupts all belong to tpcc):
> >
> > ocp {
> > ...
> >
> > edma: tpcc at 49000000 {
> > compatible = "ti,edma3";
> > ti,hwmods = "tpcc";
> > reg = <0x49000000 0x10000>;
> > interrupts = <12 13 14>;
> > #dma-cells = <1>;
> > };
> >
> > tptc0: tptc at 49800000 {
> > compatible = "ti,tptc3";
> > ti,hwmods = "tptc0";
> > reg = <0x49800000 0x10000>;
> > };
> >
> > tptc1: tptc at 49900000 {
> > compatible = "ti,tptc3";
> > ti,hwmods = "tptc1";
> > reg = <0x49900000 0x10000>;
> > };
> >
> > tptc2: tptc at 49a00000 {
> > compatible = "ti,tptc3";
> > ti,hwmods = "tptc2";
> > reg = <0x49a00000 0x10000>;
> > };
> > ...
> > };
>
> I tried this, with the patch below, but it doesn't work:
With the above the tptc instances are being probed as separate
device entries that do not register with tpcc without the
related driver changes. I don't think we even parse the
compatible = "ti,tptc3" property currently.
Regards,
Tony
> ----------8<---------- Output with 4.1-rc1 vanilla ----------8<----------
>
> Loading ARM Linux zImage '/mnt/mmc0.1//boot/zImage'
> Loading devicetree from '/mnt/mmc0.1//boot/am335x-afi-gf.dtb'
> commandline: console=ttyO2,115200n8 root=/dev/mmcblk0p2 rootfstype=ext4 rootwait loglevel=6
> [ 0.000000] Linux version 4.1.0-rc1 (rsc at callisto) (gcc version 4.8.3 20131111 (prerelease) (OSELAS.Toolchain-2013.12.2 linaro-4.8-2013.11) ) #9 PREEMPT Mon May 4 22:24:41 CEST 2015
> [ 0.000000] earlycon: no match for ttyO2,115200n8
> [ 0.000000] Kernel command line: console=ttyO2,115200n8 root=/dev/mmcblk0p2 rootfstype=ext4 rootwait loglevel=6
> [ 0.000000] Virtual kernel memory layout:
> [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
> [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
> [ 0.000000] vmalloc : 0xd0800000 - 0xff000000 ( 744 MB)
> [ 0.000000] lowmem : 0xc0000000 - 0xd0000000 ( 256 MB)
> [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
> [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
> [ 0.000000] .text : 0xc0008000 - 0xc0674ed4 (6580 kB)
> [ 0.000000] .init : 0xc0675000 - 0xc06b2000 ( 244 kB)
> [ 0.000000] .data : 0xc06b2000 - 0xc06fd3e8 ( 301 kB)
> [ 0.000000] .bss : 0xc0700000 - 0xc073a5d8 ( 234 kB)
> [ 0.145038] omap_hwmod: tptc0 using broken dt data from edma
> [ 0.145247] omap_hwmod: tptc1 using broken dt data from edma
> [ 0.145425] omap_hwmod: tptc2 using broken dt data from edma
> [ 0.151051] omap_hwmod: debugss: _wait_target_disable failed
> [ 0.323079] SCSI subsystem initialized
> [ 0.356218] NFS: Registering the id_resolver key type
> [ 0.356339] Key type id_resolver registered
> [ 0.356354] Key type id_legacy registered
> [ 0.518782] 47401300.usb-phy supply vcc not found, using dummy regulator
> [ 0.532356] 47401b00.usb-phy supply vcc not found, using dummy regulator
> [ 0.554370] Key type dns_resolver registered
> [ 0.559333] omap_voltage_late_init: Voltage driver support not added
> [ 0.775905] mmc0: host does not support reading read-only switch, assuming write-enable
> [ 1.140875] musb-hdrc musb-hdrc.0.auto: VBUS_ERROR in a_wait_vrise (80, <SessEnd), retry #3, port1 0008010c
> [ 1.561977] random: systemd urandom read with 17 bits of entropy available
>
> Welcome to PTXdist / af inventions-GF!
>
> <userspace starts>
>
> ----------8<---------- Output with patch ----------8<----------
>
> [ 0.000000] Linux version 4.1.0-rc1+ (rsc at callisto) (gcc version 4.8.3 20131111 (prerelease) (OSELAS.Toolchain-2013.12.2 linaro-4.8-2013.11) ) #10 PREEMPT Mon May 4 23:03:27 CEST 2015
> [ 0.000000] earlycon: no match for ttyO2,115200n8
> [ 0.000000] Kernel command line: console=ttyO2,115200n8 root=/dev/mmcblk0p2 rootfstype=ext4 rootwait loglevel=6
> [ 0.000000] Virtual kernel memory layout:
> [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
> [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
> [ 0.000000] vmalloc : 0xd0800000 - 0xff000000 ( 744 MB)
> [ 0.000000] lowmem : 0xc0000000 - 0xd0000000 ( 256 MB)
> [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
> [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
> [ 0.000000] .text : 0xc0008000 - 0xc0674ed4 (6580 kB)
> [ 0.000000] .init : 0xc0675000 - 0xc06b2000 ( 244 kB)
> [ 0.000000] .data : 0xc06b2000 - 0xc06fd3e8 ( 301 kB)
> [ 0.000000] .bss : 0xc0700000 - 0xc073a5d8 ( 234 kB)
> [ 0.151101] omap_hwmod: debugss: _wait_target_disable failed
> [ 0.278517] edma 49000000.tpcc: failed to get DT data
> [ 0.278670] edma: probe of 49000000.tpcc failed with error -12
> [ 0.312864] SCSI subsystem initialized
> [ 0.345860] NFS: Registering the id_resolver key type
> [ 0.345977] Key type id_resolver registered
> [ 0.345992] Key type id_legacy registered
> [ 0.493001] spi spi1.0: not using DMA for McSPI
> [ 0.498211] spi spi1.1: not using DMA for McSPI
> [ 0.511199] 47401300.usb-phy supply vcc not found, using dummy regulator
> [ 0.524715] 47401b00.usb-phy supply vcc not found, using dummy regulator
> [ 0.546556] Key type dns_resolver registered
> [ 0.551522] omap_voltage_late_init: Voltage driver support not added
> [ 0.644175] omap_hsmmc 48060000.mmc: unable to obtain RX DMA engine channel 3473832464
> [ 1.133193] musb-hdrc musb-hdrc.0.auto: VBUS_ERROR in a_wait_vrise (80, <SessEnd), retry #3, port1 0008010c
>
> <hangs>
>
> ----------8<---------- patch ----------8<----------
>
> diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi
> index 21fcc44..34eb437 100644
> --- a/arch/arm/boot/dts/am33xx.dtsi
> +++ b/arch/arm/boot/dts/am33xx.dtsi
> @@ -156,15 +156,32 @@
> reg = <0x48200000 0x1000>;
> };
>
> - edma: edma at 49000000 {
> + edma: tpcc at 49000000 {
> compatible = "ti,edma3";
> - ti,hwmods = "tpcc", "tptc0", "tptc1", "tptc2";
> - reg = <0x49000000 0x10000>,
> - <0x44e10f90 0x40>;
> + ti,hwmods = "tpcc";
> + reg = <0x49000000 0x10000>;
> interrupts = <12 13 14>;
> #dma-cells = <1>;
> };
>
> + tptc0: tptc at 49800000 {
> + compatible = "ti,tptc3";
> + ti,hwmods = "tptc0";
> + reg = <0x49800000 0x10000>;
> + };
> +
> + tptc1: tptc at 49900000 {
> + compatible = "ti,tptc3";
> + ti,hwmods = "tptc1";
> + reg = <0x49900000 0x10000>;
> + };
> +
> + tptc2: tptc at 49a00000 {
> + compatible = "ti,tptc3";
> + ti,hwmods = "tptc2";
> + reg = <0x49a00000 0x10000>;
> + };
> +
> gpio0: gpio at 44e07000 {
> compatible = "ti,omap4-gpio";
> ti,hwmods = "gpio1";
>
> rsc
> --
> Pengutronix e.K. | |
> Industrial Linux Solutions | http://www.pengutronix.de/ |
> Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
> Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
More information about the linux-arm-kernel
mailing list