[PATCH v2 0/2] gpio driver for NXP LPC18xx family

[Joachim Eastwood]

This patch set adds a gpio driver for NXP LPC18xx/43xx devices.
Patchset is based on Linus master 4.1-rc1.

changes in v2:
 - use PBYTE register for gpio set/get
 - refactor direction setup
 - add lock for direction set RMW cycle
 - expand doc example

Base support for the family can be found here:
http://marc.info/?l=linux-arm-kernel&m=143016894704253&w=2

DTS changes will come once base support and clk patches goes upstream.

Joachim Eastwood (2):
  gpio: add lpc18xx gpio driver
  doc: dt: add documentation for lpc1850-gpio driver

 .../devicetree/bindings/gpio/nxp,lpc1850-gpio.txt  |  39 +++++
 drivers/gpio/Kconfig                               |   8 +
 drivers/gpio/Makefile                              |   1 +
 drivers/gpio/gpio-lpc18xx.c                        | 180 +++++++++++++++++++++
 4 files changed, 228 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/gpio/nxp,lpc1850-gpio.txt
 create mode 100644 drivers/gpio/gpio-lpc18xx.c

-- 
1.8.0