[PATCH 2/2] phy: driver for Conexant Digicolor internal USB PHY

[Kishon Vijay Abraham I]

Hi,

On Tuesday 31 March 2015 05:04 PM, Baruch Siach wrote:
> Hi Marek,
>
> On Sat, Mar 28, 2015 at 04:33:02PM +0100, Marek Vasut wrote:
>> On Friday, March 27, 2015 at 05:36:29 AM, Baruch Siach wrote:
>>> Add a driver for the USB PHY on the Conexant CX92755 SoC, from the
>>> Digicolor series of SoCs. The PHY is connected to the on-chip chipidea
>>> usb2 host.
>>>
>>> The hardware is somewhat similar to the phy-mxs-usb.c usb_phy, but it is
>>> different enough to merit its own driver. Also, this driver uses the
>>> generic phy infrastructure.
>>
>> the register set looks very similar to MXS one indeed. How is it different
>> please ?
>
> Almost of the bits that are defined in the MXS USBPHY_CTRL register are not
> defined in the Digicolor one. Some have different meaning, and some are
> reserved. OTOH, the Digicolor USBPHY_CTRL register uses all bits in the 1-13
> range. Also, the Digicolor phy does not have anatop registers.

I think we should try adding support for this in the same driver.

Thanks
Kishon