[PATCHv5 26/35] ARM: dts: omap3: add minimal l4 bus layout with control module support

[Tero Kristo]

On 03/31/2015 01:56 AM, Tony Lindgren wrote:
> Hi,
>
> * Tero Kristo <t-kristo at ti.com> [150320 11:46]:
>> --- a/arch/arm/boot/dts/omap3.dtsi
>> +++ b/arch/arm/boot/dts/omap3.dtsi
>> @@ -87,6 +87,60 @@
>>   		ranges;
>>   		ti,hwmods = "l3_main";
>>
>> +		l4_core: l4 at 48000000 {
>> +			compatible = "ti,omap3-l4-core", "simple-bus";
>> +			#address-cells = <1>;
>> +			#size-cells = <1>;
>> +			ranges = <0 0x48000000 0x1000000>;
>> +
>> +			scm: scm at 2000 {
>> +				compatible = "ti,omap3-scm", "simple-bus";
>> +				reg = <0x2000 0x2000>;
>> +				#address-cells = <1>;
>> +				#size-cells = <1>;
>> +				ranges = <0 0x2000 0x2000>;
>> +
>> +				omap3_pmx_core: pinmux at 30 {
>> +					compatible = "ti,omap3-padconf",
>> +						     "pinctrl-single";
>> +					reg = <0x30 0x230>;
>> +					#address-cells = <1>;
>> +					#size-cells = <0>;
>> +					#interrupt-cells = <1>;
>> +					interrupt-controller;
>> +					pinctrl-single,register-width = <16>;
>> +					pinctrl-single,function-mask = <0xff1f>;
>> +				};
>
> Just noticed we may be now missing few pins as diffing the dmesg before
> and after this series produces this on omap3:
>
> -pinctrl-single 48002030.pinmux: 284 pins at pa fa002030 size 568
> +pinctrl-single 48002030.pinmux: 280 pins at pa fa002030 size 560
>
> Care to check that?

True, there is a typo in the omap3.dtsi file. Will fix this and repost.

-Tero