[PATCH] ARM: dts: Use define for s3c-rtc clock id

[Kukjin Kim]

Javier Martinez Canillas wrote:
> 
> On Tue, Mar 31, 2015 at 6:05 AM, Chanwoo Choi <cw00.choi at samsung.com> wrote:
> > Hi,
> >
> > On 03/31/2015 12:21 AM, Krzysztof Kozlowski wrote:
> >> Use a define instead of raw number as a ID for "rtc_src" clock.
> >>
> >> Signed-off-by: Krzysztof Kozlowski <k.kozlowski at samsung.com>
> >>
> >> ---
> >>
> >> Patch depends on new file "dt-bindings/clock/samsung,s2mps11.h" from:
> >> http://www.mail-archive.com/linux-samsung-soc@vger.kernel.org/msg43136.html
> >> ---
> >>  arch/arm/boot/dts/exynos3250-rinato.dts | 3 ++-
> >>  1 file changed, 2 insertions(+), 1 deletion(-)
> >>
> >> diff --git a/arch/arm/boot/dts/exynos3250-rinato.dts b/arch/arm/boot/dts/exynos3250-rinato.dts
> >> index 3905824cac58..d2cbc95364de 100644
> >> --- a/arch/arm/boot/dts/exynos3250-rinato.dts
> >> +++ b/arch/arm/boot/dts/exynos3250-rinato.dts
> >> @@ -16,6 +16,7 @@
> >>  #include "exynos3250.dtsi"
> >>  #include <dt-bindings/input/input.h>
> >>  #include <dt-bindings/gpio/gpio.h>
> >> +#include <dt-bindings/clock/samsung,s2mps11.h>
> >>
> >>  / {
> >>       model = "Samsung Rinato board";
> >> @@ -605,7 +606,7 @@
> >>  };
> >>
> >>  &rtc {
> >> -     clocks = <&cmu CLK_RTC>, <&s2mps14_osc 0>;
> >> +     clocks = <&cmu CLK_RTC>, <&s2mps14_osc S2MPS11_CLK_AP>;
> >>       clock-names = "rtc", "rtc_src";
> >>       status = "okay";
> >>  };
> >>
> >
> > Looks good to me.
> >
> > Reviewed-by: Chanwoo Choi <cw00.choi at samsung.com>
> >
> 
> Reviewed-by: Javier Martinez Canillas <javier.martinez at collabora.co.uk>
> 
Thanks for you guys' review. Applied.

- Kukjin