[PATCH] dmaengine: sa11x0: fix boot-time warning

[Vinod Koul]

On Mon, Mar 30, 2015 at 06:04:06PM +0300, Dmitry Eremin-Solenikov wrote:
> Hello,
> 
> 2015-03-30 15:11 GMT+03:00 Russell King - ARM Linux <linux at arm.linux.org.uk>:
> > On Mon, Mar 30, 2015 at 12:41:50PM +0300, Dmitry Eremin-Solenikov wrote:
> >> Fix the following warning by initializing directions field in the dma_device
> >> structure.
> >>
> >> ------------[ cut here ]------------
> >> WARNING: CPU: 0 PID: 1 at drivers/dma/dmaengine.c:863 dma_async_device_register+0x2b4/0x4f0()
> >> this driver doesn't support generic slave capabilities reporting
> >> Modules linked in:
> >> CPU: 0 PID: 1 Comm: swapper Not tainted 4.0.0-rc5+ #10
> >> Hardware name: Sharp-Collie
> >> [<c0105cd8>] (unwind_backtrace) from [<c0103ef8>] (show_stack+0x10/0x14)
> >> [<c0103ef8>] (show_stack) from [<c010e9b8>] (warn_slowpath_common+0x74/0xac)
> >> [<c010e9b8>] (warn_slowpath_common) from [<c010ea20>] (warn_slowpath_fmt+0x30/0x40)
> >> [<c010ea20>] (warn_slowpath_fmt) from [<c02956fc>] (dma_async_device_register+0x2b4/0x4f0)
> >> [<c02956fc>] (dma_async_device_register) from [<c0296a9c>] (sa11x0_dma_probe+0x21c/0x358)
> >> [<c0296a9c>] (sa11x0_dma_probe) from [<c02c52c0>] (platform_drv_probe+0x30/0x94)
> >> [<c02c52c0>] (platform_drv_probe) from [<c02c39bc>] (driver_probe_device+0x84/0x234)
> >> [<c02c39bc>] (driver_probe_device) from [<c02c3c4c>] (__driver_attach+0x98/0x9c)
> >> [<c02c3c4c>] (__driver_attach) from [<c02c1f9c>] (bus_for_each_dev+0x74/0xa4)
> >> [<c02c1f9c>] (bus_for_each_dev) from [<c02c3230>] (bus_add_driver+0x13c/0x1e8)
> >> [<c02c3230>] (bus_add_driver) from [<c02c4260>] (driver_register+0x78/0xf8)
> >> [<c02c4260>] (driver_register) from [<c0100624>] (do_one_initcall+0x84/0x1f4)
> >> [<c0100624>] (do_one_initcall) from [<c0700e1c>] (kernel_init_freeable+0xf8/0x1b4)
> >> [<c0700e1c>] (kernel_init_freeable) from [<c040a920>] (kernel_init+0x8/0xf0)
> >> [<c040a920>] (kernel_init) from [<c01013a8>] (ret_from_fork+0x14/0x2c)
> >> ---[ end trace e188b8fe0e782e75 ]---
> >>
> >> Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov at gmail.com>
> >
> > It's an improvement, but I wonder whether src_addr_widths, dst_addr_widths
> > and residue_granularity should also be filled in.
> 
> Nice catch. Missed that. I'll send a v2 tomorrow.
Yes that is the recommendation. I am pushing back on patches without all 4
fields filled in :)

-- 
~Vinod