[PATCH] clk: at91: pll: fix input range validity check

[Boris Brezillon]

The PLL impose a certain input range to work correctly, but it appears that
this input range does not apply on the input clock (or parent clock) but
on the input clock after it has passed the PLL divisor.
Fix the implementation accordingly.

Cc: <stable at vger.kernel.org> # v3.14+
Signed-off-by: Boris Brezillon <boris.brezillon at free-electrons.com>
Reported-by: Jonas Andersson <jonas at microbit.se>
---
 drivers/clk/at91/clk-pll.c | 12 ++++++++++--
 1 file changed, 10 insertions(+), 2 deletions(-)

diff --git a/drivers/clk/at91/clk-pll.c b/drivers/clk/at91/clk-pll.c
index 6ec79db..cbbe403 100644
--- a/drivers/clk/at91/clk-pll.c
+++ b/drivers/clk/at91/clk-pll.c
@@ -173,8 +173,7 @@ static long clk_pll_get_best_div_mul(struct clk_pll *pll, unsigned long rate,
 	int i = 0;
 
 	/* Check if parent_rate is a valid input rate */
-	if (parent_rate < characteristics->input.min ||
-	    parent_rate > characteristics->input.max)
+	if (parent_rate < characteristics->input.min)
 		return -ERANGE;
 
 	/*
@@ -187,6 +186,15 @@ static long clk_pll_get_best_div_mul(struct clk_pll *pll, unsigned long rate,
 	if (!mindiv)
 		mindiv = 1;
 
+	if (parent_rate > characteristics->input.max) {
+		tmpdiv = DIV_ROUND_UP(parent_rate, characteristics->input.max);
+		if (tmpdiv > PLL_DIV_MAX)
+			return -ERANGE;
+
+		if (tmpdiv > mindiv)
+			mindiv = tmpdiv;
+	}
+
 	/*
 	 * Calculate the maximum divider which is limited by PLL register
 	 * layout (limited by the MUL or DIV field size).
-- 
1.9.1