[PATCH 2/3] ARM: at91/dt: sama5d3 add mmc0 vmmcq entry

[Ben Dooks]

The SAM5D3 Xplained device tree is missing hte vqmmc node which is
tied to 3.3V on the board. Add this to avoid the kernel warning that
there is no vqmmc node.

atmel_mci f0000000.mmc: No vqmmc regulator found

Signed-off-by: Ben Dooks <ben.dooks at codethink.co.uk>
--
CC: linux-arm-kernel at lists.infradead.org
CC: Andrew Victor <linux at maxim.org.za>
CC: Nicolas Ferre <nicolas.ferre at atmel.com>
CC: Jean-Christophe Plagniol-Villard <plagnioj at jcrosoft.com>
CC: Rob Herring <robh+dt at kernel.org>
CC: Pawel Moll <pawel.moll at arm.com>
CC: Mark Rutland <mark.rutland at arm.com>
CC: Ian Campbell <ijc+devicetree at hellion.org.uk>
CC: Kumar Gala <galak at codeaurora.org>
CC: Russell King <linux at arm.linux.org.uk>
CC: linux-arm-kernel at lists.infradead.org
CC: devicetree at vger.kernel.org
---
 arch/arm/boot/dts/at91-sama5d3_xplained.dts | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm/boot/dts/at91-sama5d3_xplained.dts b/arch/arm/boot/dts/at91-sama5d3_xplained.dts
index 652c4dd..1eb150d 100644
--- a/arch/arm/boot/dts/at91-sama5d3_xplained.dts
+++ b/arch/arm/boot/dts/at91-sama5d3_xplained.dts
@@ -36,6 +36,7 @@
 			mmc0: mmc at f0000000 {
 				pinctrl-0 = <&pinctrl_mmc0_clk_cmd_dat0 &pinctrl_mmc0_dat1_3 &pinctrl_mmc0_dat4_7 &pinctrl_mmc0_cd>;
 				status = "okay";
+				vqmmc-supply = <&vcc_3v3_reg>;
 				slot at 0 {
 					reg = <0>;
 					bus-width = <8>;
-- 
2.1.4