[PATCH 2/3] mfd: qcom_rpm: add support for IPQ8064

[Lee Jones]

On Thu, 19 Mar 2015, Lee Jones wrote:

> On Thu, 20 Nov 2014, Josh Cartwright wrote:
> 
> > The IPQ8064 also includes an RPM following the same message structure as
> > other chips.  In addition, it supports a few new resource types to
> > support the NSS fabric clocks and the SMB208/SMB209 regulators found on
> > the reference boards.
> > 
> > Signed-off-by: Josh Cartwright <joshc at codeaurora.org>
> > ---
> >  drivers/mfd/qcom_rpm.c | 41 +++++++++++++++++++++++++++++++++++++++++
> >  1 file changed, 41 insertions(+)
> 
> Applied with Stephen's Ack.

I have unapplied this one too, as it depends on the other one.

> > diff --git a/drivers/mfd/qcom_rpm.c b/drivers/mfd/qcom_rpm.c
> > index 0dd7a6fe..5ead23b 100644
> > --- a/drivers/mfd/qcom_rpm.c
> > +++ b/drivers/mfd/qcom_rpm.c
> > @@ -324,10 +324,51 @@ static const struct qcom_rpm_data msm8960_template = {
> >  	.n_resources = ARRAY_SIZE(msm8960_rpm_resource_table),
> >  };
> >  
> > +static const struct qcom_rpm_resource ipq806x_rpm_resource_table[] = {
> > +	[QCOM_RPM_CXO_CLK] =			{ 25, 9, 5, 1 },
> > +	[QCOM_RPM_PXO_CLK] =			{ 26, 10, 6, 1 },
> > +	[QCOM_RPM_APPS_FABRIC_CLK] =		{ 27, 11, 8, 1 },
> > +	[QCOM_RPM_SYS_FABRIC_CLK] =		{ 28, 12, 9, 1 },
> > +	[QCOM_RPM_NSS_FABRIC_0_CLK] =		{ 29, 13, 10, 1 },
> > +	[QCOM_RPM_DAYTONA_FABRIC_CLK] =		{ 30, 14, 11, 1 },
> > +	[QCOM_RPM_SFPB_CLK] =			{ 31, 15, 12, 1 },
> > +	[QCOM_RPM_CFPB_CLK] =			{ 32, 16, 13, 1 },
> > +	[QCOM_RPM_NSS_FABRIC_1_CLK] =		{ 33, 17, 14, 1 },
> > +	[QCOM_RPM_EBI1_CLK] =			{ 34, 18, 16, 1 },
> > +	[QCOM_RPM_APPS_FABRIC_HALT] =		{ 35, 19, 18, 2 },
> > +	[QCOM_RPM_APPS_FABRIC_MODE] =		{ 37, 20, 19, 3 },
> > +	[QCOM_RPM_APPS_FABRIC_IOCTL] =		{ 40, 21, 20, 1 },
> > +	[QCOM_RPM_APPS_FABRIC_ARB] =		{ 41, 22, 21, 12 },
> > +	[QCOM_RPM_SYS_FABRIC_HALT] =		{ 53, 23, 22, 2 },
> > +	[QCOM_RPM_SYS_FABRIC_MODE] =		{ 55, 24, 23, 3 },
> > +	[QCOM_RPM_SYS_FABRIC_IOCTL] =		{ 58, 25, 24, 1 },
> > +	[QCOM_RPM_SYS_FABRIC_ARB] =		{ 59, 26, 25, 30 },
> > +	[QCOM_RPM_MM_FABRIC_HALT] =		{ 89, 27, 26, 2 },
> > +	[QCOM_RPM_MM_FABRIC_MODE] =		{ 91, 28, 27, 3 },
> > +	[QCOM_RPM_MM_FABRIC_IOCTL] =		{ 94, 29, 28, 1 },
> > +	[QCOM_RPM_MM_FABRIC_ARB] =		{ 95, 30, 29, 2 },
> > +	[QCOM_RPM_CXO_BUFFERS] =		{ 209, 33, 31, 1 },
> > +	[QCOM_RPM_USB_OTG_SWITCH] =		{ 210, 34, 32, 1 },
> > +	[QCOM_RPM_HDMI_SWITCH] =		{ 211, 35, 33, 1 },
> > +	[QCOM_RPM_DDR_DMM] =			{ 212, 36, 34, 2 },
> > +	[QCOM_RPM_VDDMIN_GPIO] =		{ 215, 40, 39, 1 },
> > +	[QCOM_RPM_SMB208_S1a] =			{ 216, 41, 90, 2 },
> > +	[QCOM_RPM_SMB208_S1b] =			{ 218, 43, 91, 2 },
> > +	[QCOM_RPM_SMB208_S2a] =			{ 220, 45, 92, 2 },
> > +	[QCOM_RPM_SMB208_S2b] =			{ 222, 47, 93, 2 },
> > +};
> > +
> > +static const struct qcom_rpm_data ipq806x_template = {
> > +	.version = 3,
> > +	.resource_table = ipq806x_rpm_resource_table,
> > +	.n_resources = ARRAY_SIZE(ipq806x_rpm_resource_table),
> > +};
> > +
> >  static const struct of_device_id qcom_rpm_of_match[] = {
> >  	{ .compatible = "qcom,rpm-apq8064", .data = &apq8064_template },
> >  	{ .compatible = "qcom,rpm-msm8660", .data = &msm8660_template },
> >  	{ .compatible = "qcom,rpm-msm8960", .data = &msm8960_template },
> > +	{ .compatible = "qcom,rpm-ipq8064", .data = &ipq806x_template },
> >  	{ }
> >  };
> >  MODULE_DEVICE_TABLE(of, qcom_rpm_of_match);
> 

-- 
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog