[RESEND PATCH v3] mtd: hisilicon: add device tree node for NAND controller
Zhou Wang
wangzhou1 at hisilicon.com
Wed Mar 25 21:53:57 PDT 2015
On 2015/3/26 10:13, Haojian Zhuang wrote:
> On 25 March 2015 at 15:04, Zhou Wang <wangzhou1 at hisilicon.com> wrote:
>> This patch adds dts support for NAND flash controller of Hisilicon Soc Hip04.
>> Now it is based on v4.0-rc5
>>
>> Changes in v3:
>> - Change E-mail address in signed-off-by to "wangzhou1 at hisilicon.com"
>> Changes in v2:
>> - Base on v3.19-rc1
>> - Use nand-ecc-strength, nand-ecc-step-size to replace hisi,nand-ecc-bits
>> Changes in v1:
>> - Move partition and other board related information into board dts file:
>> hip04-d01.dts
>>
>> Signed-off-by: Zhou Wang <wangzhou1 at hisilicon.com>
>> ---
>> arch/arm/boot/dts/hip04-d01.dts | 27 +++++++++++++++++++++++++++
>> arch/arm/boot/dts/hip04.dtsi | 7 +++++++
>> 2 files changed, 34 insertions(+)
>>
>> diff --git a/arch/arm/boot/dts/hip04-d01.dts b/arch/arm/boot/dts/hip04-d01.dts
>> index 40a9e33..ba04dd5 100644
>> --- a/arch/arm/boot/dts/hip04-d01.dts
>> +++ b/arch/arm/boot/dts/hip04-d01.dts
>> @@ -28,5 +28,32 @@
>> uart0: uart at 4007000 {
>> status = "ok";
>> };
>> +
>> + nand: nand at 4020000 {
>> + nand-bus-width = <8>;
>> + nand-ecc-mode = "hw";
>> + nand-ecc-strength = <16>;
>> + nand-ecc-step-size = <1024>;
>> +
>> + partition at 0 {
>> + label = "nand_text";
>> + reg = <0x00000000 0x00400000>;
>> + };
>> +
>> + partition at 00400000 {
>> + label = "nand_monitor";
>> + reg = <0x00400000 0x00400000>;
>> + };
>> +
>> + partition at 00800000 {
>> + label = "nand_kernel";
>> + reg = <0x00800000 0x00800000>;
>> + };
>> +
>> + partition at 01000000 {
>> + label = "nand_fs";
>> + reg = <0x01000000 0x1f000000>;
>> + };
>> + };
>> };
>> };
>> diff --git a/arch/arm/boot/dts/hip04.dtsi b/arch/arm/boot/dts/hip04.dtsi
>> index 2388145..ac32fce 100644
>> --- a/arch/arm/boot/dts/hip04.dtsi
>> +++ b/arch/arm/boot/dts/hip04.dtsi
>> @@ -269,6 +269,13 @@
>> interrupts = <0 372 4>;
>> };
>>
>> + nand: nand at 4020000 {
>> + compatible = "hisilicon,504-nfc";
>> + reg = <0x4020000 0x10000>, <0x5000000 0x1000>;
>> + interrupts = <0 379 4>;
>> + #address-cells = <1>;
>> + #size-cells = <1>;
>> + };
>> };
>>
>> etb at 0,e3c42000 {
>> --
>> 1.9.1
>>
>
> Acked-by: Haojian Zhuang <haojian.zhuang at linaro.org>
>
> .
>
Thanks!
Zhou Wang
More information about the linux-arm-kernel
mailing list