[PATCH v2] ARM: dts: imx25-pinfunc: Add several pinfunctions
mpa at pengutronix.de
Wed Mar 25 04:04:34 PDT 2015
On Tue, Mar 24, 2015 at 09:02:20PM +0100, Uwe Kleine-König wrote:
> Hello Markus,
> On Tue, Mar 24, 2015 at 03:12:22PM +0100, Markus Pargmann wrote:
> > +/* The imx25 RM appendix describes this mux as CAN1 which is wrong */
> > +#define MX25_PAD_FEC_RDATA1__CAN2_TX 0x1e0 0x3d8 0x000 0x14 0x000
> What about
> * According to the i.MX25 Reference manual (IMX25RM, Rev. 2,
> * 01/2011) this is CAN1_TX but that's wrong.
> ? It doesn't fit in a single line, but it's still reconstructable in
> case Freescale publishes a Rev 3 which is wrong in a different way :-)
Although I am not expecting a new revision of the reference manual it's
a good idea to state the reference manual revision in the comment.
Thanks, will fix that.
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
-------------- next part --------------
A non-text attachment was scrubbed...
Size: 819 bytes
Desc: Digital signature
More information about the linux-arm-kernel