[RESEND PATCH v6 0/2] ARM: hip04: add GPIO support

[Zhou Wang]

On 2015/3/25 15:02, Haojian Zhuang wrote:
> On 25 March 2015 at 14:57, Zhou Wang <wangzhou1 at hisilicon.com> wrote:
>> This series add the support for the GPIOs of Hisilicon Soc hip04. Hip04 uses
>> synopsis' GPIO IP, and we use the dwapb GPIO driver here. This series add the
>> corresponding dts. The default value of ARCH_NR_GPIOS is used to find gpio
>> base here.
>>
>> Now this patchset is based on v4.0-rc5
>>
>> Change in v6:
>> - Change E-mail address in signed-off-by to "wangzhou1 at hisilicon.com"
>> Change in v5:
>> - Base on v3.19-rc1
>> - Just use default value of ARCH_NR_GPIOS to find gpio base. Remove the new
>>   added patch(3/4) in v4.
>> Change in v4:
>> - Delete "default 128 if ARCH_HIP04" in arch/arm/Kconfig
>> - add a new patch to support find GPIO base number in increasing order
>> - add gpio-number-forward property in snps gpio binding doc
>> Change in v3:
>> - Move CONFIG_GPIO_DWAPB to hisi_defconfig
>> - Add CONFIG_GPIOLIB, CONFIG_GPIO_SYSFS in hisi_defconfig
>> Change in v2:
>> - Add select GPIO_DWAPB in arch/arm/mach-hisi/Kconfig
>>
>> Link for v4:
>> - http://www.spinics.net/lists/arm-kernel/msg383883.html
>> Link for v3:
>> - http://www.spinics.net/lists/devicetree/msg60324.html
>>
>>
>> Zhou Wang (2):
>>   ARM: hip04: add GPIO configure in hisi_defconfig
>>   ARM: dts: hip04: add GPIO pieces
>>
>>  arch/arm/boot/dts/hip04.dtsi    | 75 +++++++++++++++++++++++++++++++++++++++++
>>  arch/arm/configs/hisi_defconfig |  1 +
>>  2 files changed, 76 insertions(+)
>>
>> --
>> 1.9.1
>>
> Acked-by: Haojian Zhuang <haojian.zhuang at linaro.org>
> 
> .
>

Thanks!
Zhou Wang