[PATCH V2 1/2] ARM: dts: DRA7: Add bandgap and related thermal nodes

[Nishanth Menon]

From: Keerthy <j-keerthy at ti.com>

Add bandgap and related thermal nodes. The patch adds 5 thermal
sensors. Only one cooling device for mpu as of now. The sensors are
the exact same on both dra72 and dra7. Introduce CPU, GPU, core nodes
for the moment as they are direct reuse of OMAP5 entities.

NOTE: OMAP4 has a finer counter granularity, which allows for a delay
of 1000ms in the thermal zone polling intervals. DRA7 have different
counter mechanism, which allows at maximum a 500ms timer. Adjust the
cpu thermal zone accordingly for DRA7.

Signed-off-by: Keerthy <j-keerthy at ti.com>
[t-kristo at ti.com: few reuse from OMAP5 entities]
Signed-off-by: Tero Kristo <t-kristo at ti.com>
Signed-off-by: Nishanth Menon <nm at ti.com>
---
Changes since V1:
	- omap5-cpu-thermal.dtsi dropped
	- approach similar to omap5
	- added core and gpu thermal dtsi(they can be reused)
	- Squashed patch #1 from v1 to patch #2 - this patch.
	- Not carrying forward ack due to change

V1: http://marc.info/?t=142688102700006&r=1&w=2

 arch/arm/boot/dts/dra7.dtsi   |   23 +++++++++++++++++++++++
 arch/arm/boot/dts/dra72x.dtsi |    5 +++++
 arch/arm/boot/dts/dra74x.dtsi |    5 +++++
 3 files changed, 33 insertions(+)

diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi
index eea4a54d6cb3..2d6a7e3e001f 100644
--- a/arch/arm/boot/dts/dra7.dtsi
+++ b/arch/arm/boot/dts/dra7.dtsi
@@ -177,6 +177,18 @@
 			};
 		};
 
+		bandgap: bandgap at 4a0021e0 {
+			reg = <0x4a0021e0 0xc
+				0x4a00232c 0xc
+				0x4a002380 0x2c
+				0x4a0023C0 0x3c
+				0x4a002564 0x8
+				0x4a002574 0x50>;
+				compatible = "ti,dra752-bandgap";
+				interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
+				#thermal-sensor-cells = <1>;
+		};
+
 		cm_core_aon: cm_core_aon at 4a005000 {
 			compatible = "ti,dra7-cm-core-aon";
 			reg = <0x4a005000 0x2000>;
@@ -1419,6 +1431,17 @@
 			status = "disabled";
 		};
 	};
+
+	thermal_zones: thermal-zones {
+		#include "omap4-cpu-thermal.dtsi"
+		#include "omap5-gpu-thermal.dtsi"
+		#include "omap5-core-thermal.dtsi"
+	};
+
+};
+
+&cpu_thermal {
+	polling-delay = <500>; /* milliseconds */
 };
 
 /include/ "dra7xx-clocks.dtsi"
diff --git a/arch/arm/boot/dts/dra72x.dtsi b/arch/arm/boot/dts/dra72x.dtsi
index e5a3d23a3df1..6ac8e3601499 100644
--- a/arch/arm/boot/dts/dra72x.dtsi
+++ b/arch/arm/boot/dts/dra72x.dtsi
@@ -20,6 +20,11 @@
 			device_type = "cpu";
 			compatible = "arm,cortex-a15";
 			reg = <0>;
+
+			/* cooling options */
+			cooling-min-level = <0>;
+			cooling-max-level = <2>;
+			#cooling-cells = <2>; /* min followed by max */
 		};
 	};
 
diff --git a/arch/arm/boot/dts/dra74x.dtsi b/arch/arm/boot/dts/dra74x.dtsi
index 10173fab1a15..eef981f4bcd5 100644
--- a/arch/arm/boot/dts/dra74x.dtsi
+++ b/arch/arm/boot/dts/dra74x.dtsi
@@ -31,6 +31,11 @@
 			clock-names = "cpu";
 
 			clock-latency = <300000>; /* From omap-cpufreq driver */
+
+			/* cooling options */
+			cooling-min-level = <0>;
+			cooling-max-level = <2>;
+			#cooling-cells = <2>; /* min followed by max */
 		};
 		cpu at 1 {
 			device_type = "cpu";
-- 
1.7.9.5