[PATCH 3/5] ARM: dts: sun5i: Add A13 and A10s SRAM and SRAM controller
Hans de Goede
hdegoede at redhat.com
Fri Mar 20 11:52:47 PDT 2015
The A13 / A10s has a few SRAM that can be mapped either to a device or to
the CPU, with the mapping being controlled by a SRAM controller.
Since most of the time these SRAM won't be accessible by the CPU,
we can't use the mmio-sram driver and compatible.
Signed-off-by: Hans de Goede <hdegoede at redhat.com>
---
arch/arm/boot/dts/sun5i.dtsi | 34 ++++++++++++++++++++++++++++++++++
1 file changed, 34 insertions(+)
diff --git a/arch/arm/boot/dts/sun5i.dtsi b/arch/arm/boot/dts/sun5i.dtsi
index de48692..eb5bce5 100644
--- a/arch/arm/boot/dts/sun5i.dtsi
+++ b/arch/arm/boot/dts/sun5i.dtsi
@@ -298,12 +298,46 @@
};
};
+ /*
+ * Note we use the address were mmio registers start, not where the
+ * SRAM blocks start, this cannot be changed because that would be
+ * a devicetree ABI change.
+ */
soc at 01c00000 {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges;
+ sram at 00000000 {
+ compatible = "allwinner,sun4i-a10-sram";
+ reg = <0x00000000 0x4000>;
+ allwinner,sram-name = "A1";
+ };
+
+ sram at 00004000 {
+ compatible = "allwinner,sun4i-a10-sram";
+ reg = <0x00004000 0x4000>;
+ allwinner,sram-name = "A2";
+ };
+
+ sram at 00008000 {
+ compatible = "allwinner,sun4i-a10-sram";
+ reg = <0x00008000 0x4000>;
+ allwinner,sram-name = "A3-A4";
+ };
+
+ sram at 00010000 {
+ compatible = "allwinner,sun4i-a10-sram";
+ reg = <0x00010000 0x1000>;
+ allwinner,sram-name = "D";
+ };
+
+ sram-controller at 01c00000 {
+ compatible = "allwinner,sun4i-a10-sram-controller";
+ reg = <0x01c00000 0x30>;
+ };
+
dma: dma-controller at 01c02000 {
compatible = "allwinner,sun4i-a10-dma";
reg = <0x01c02000 0x1000>;
--
2.3.3
More information about the linux-arm-kernel
mailing list