[PATCH 1/5] MFD/OF: document MFD devices and handle simple-mfd
Antoine Tenart
antoine.tenart at free-electrons.com
Fri Mar 20 06:26:46 PDT 2015
On Tue, Mar 03, 2015 at 10:32:24AM +0100, Linus Walleij wrote:
> This defines a new compatible option for MFD devices "simple-mfd" that will
> make the OF core spawn child devices for all subnodes of that MFD device.
> It is optional but handy for things like syscon and possibly other
> simpler MFD devices.
>
> Since there was no file to put the documentation in, I took this opportunity
> to make a small writeup on MFD devices and add the compatible definition
> there.
>
> Suggested-by: Lee Jones <lee.jones at linaro.org>
> Cc: Arnd Bergmann <arnd at arndb.de>
> Cc: Devicetree <devicetree at vger.kernel.org>
> Cc: Rob Herring <robh+dt at kernel.org>
> Cc: Benjamin Herrenschmidt <benh at kernel.crashing.org>
> Cc: Grant Likely <grant.likely at linaro.org>
> Cc: Pawel Moll <pawel.moll at arm.com>
> Cc: Mark Rutland <mark.rutland at arm.com>
> Cc: Ian Campbell <ijc+devicetree at hellion.org.uk>
> Cc: Kumar Gala <galak at codeaurora.org>
> Signed-off-by: Linus Walleij <linus.walleij at linaro.org>
Since I'm also using this,
Acked-by: Antoine Tenart <antoine.tenart at free-electrons.com>
> ---
> I make the patch to the OF core in this one, it makes much more sense since
> it's a oneliner
>
> Lee: this is a (tested!) implementation of your suggestion for simple-mfd.
> If you can eventually ACK this from the MFD side, I think it should be
> funneled through the ARM SoC tree.
>
> Grant/Rob: if either of you can ACK the change to the OF core likewise it can
> be taken through ARM SoC.
>
> DT binings maintainers: there is some background discussion on this here:
> http://marc.info/?l=linux-arm-kernel&m=142486676603889&w=2
> http://marc.info/?l=devicetree&m=142166313621469&w=2
> ---
> Documentation/devicetree/bindings/mfd/mfd.txt | 40 +++++++++++++++++++++++++++
> drivers/of/platform.c | 1 +
> 2 files changed, 41 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/mfd/mfd.txt
>
> diff --git a/Documentation/devicetree/bindings/mfd/mfd.txt b/Documentation/devicetree/bindings/mfd/mfd.txt
> new file mode 100644
> index 000000000000..cc057438abe8
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/mfd/mfd.txt
> @@ -0,0 +1,40 @@
> +Multi-Function Devices (MFD)
> +
> +These devices comprise a nexus for heterogeneous hardware blocks spawning
> +multiple child devices.
> +
> +A typical MFD can be:
> +
> +- A mixed signal ASIC on an external bus, sometimes a PMIC (power management
> + integrated circuit) that is manufactured in a lower technology node (rough
> + silicon) that handles analog drivers for things like audio amplifiers, LED
> + drivers, level shifters, PHY (physical interfaces to things like USB or
> + ethernet), regulators etc.
> +
> +- A range of memory registers containing "miscellaneous system registers" also
> + known as a system controller "syscon" or any other memory range containing a
> + mix of unrelated registers.
> +
> +Optional properties:
> +
> +- compatible : "simple-mfd" - this signifies that the operating system should
> + spawn child devices for all the subnodes of the MFD device akin to how
> + "simple-bus" inidicates when to spawn children for a simple memory-mapped
> + bus. For more complex devices, when the nexus driver has to probe registers
> + to figure out what children exist etc, this should not be used. In the latter
> + case the child devices will be instantiated by the operating system.
> +
> +Example:
> +
> +foo at 1000 {
> + compatible = "syscon", "simple-mfd";
> + reg = <0x010000 0x1000>;
> +
> + led at 08.0 {
> + compatible = "register-bit-led";
> + offset = <0x08>;
> + mask = <0x01>;
> + label = "myled";
> + default-state = "on";
> + };
> +};
> diff --git a/drivers/of/platform.c b/drivers/of/platform.c
> index b189733a1539..969ba4e1460c 100644
> --- a/drivers/of/platform.c
> +++ b/drivers/of/platform.c
> @@ -26,6 +26,7 @@
>
> const struct of_device_id of_default_bus_match_table[] = {
> { .compatible = "simple-bus", },
> + { .compatible = "simple-mfd", },
> #ifdef CONFIG_ARM_AMBA
> { .compatible = "arm,amba-bus", },
> #endif /* CONFIG_ARM_AMBA */
> --
> 1.9.3
>
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
--
Antoine Ténart, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com
More information about the linux-arm-kernel
mailing list