[PATCH 5/5] ARM: dts: brcmstb: add nodes for SATA controller and PHY

[Hans de Goede]

Hi,

On 19-03-15 02:23, Brian Norris wrote:
> Signed-off-by: Brian Norris <computersforpeace at gmail.com>
> ---
> Light dependency on:
>    http://lists.infradead.org/pipermail/linux-arm-kernel/2015-March/331921.html
> for the surrounding text.
>
>   arch/arm/boot/dts/bcm7445.dtsi | 36 ++++++++++++++++++++++++++++++++++++
>   1 file changed, 36 insertions(+)
>
> diff --git a/arch/arm/boot/dts/bcm7445.dtsi b/arch/arm/boot/dts/bcm7445.dtsi
> index 9eaeac8dce1b..7a7c4d8c2afe 100644
> --- a/arch/arm/boot/dts/bcm7445.dtsi
> +++ b/arch/arm/boot/dts/bcm7445.dtsi
> @@ -108,6 +108,42 @@
>   			brcm,int-map-mask = <0x25c>, <0x7000000>;
>   			brcm,int-fwd-mask = <0x70000>;
>   		};
> +
> +		sata at f045a000 {
> +			compatible = "brcm,bcm7445-ahci", "brcm,sata3-ahci";
> +			reg-names = "ahci", "top-ctrl";
> +			reg = <0x45a000 0xa9c>, <0x458040 0x24>;

Why not simply drop the second register range here, and the minimal top-ctrl
poking you need in the phy driver's phy_init function ?

This avoids the weird / ugly register overlap with the phy driver, and I think you
can then just use the ahci_platform driver unmodified.

> +			interrupts = <GIC_SPI 30 0>;
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +
> +			sata0: sata-port at 0 {
> +				reg = <0>;
> +				phys = <&sata_phy 0>;
> +			};
> +
> +			sata1: sata-port at 1 {
> +				reg = <1>;
> +				phys = <&sata_phy 1>;
> +			};
> +		};
> +
> +		sata_phy: sata-phy at f0458100 {
> +			compatible = "brcm,bcm7445-sata-phy", "brcm,phy-sata3";
> +			reg = <0x458100 0x1e00>, <0x45804c 0x10>;

Why not simply use: reg = <0x458000 0x2000>, to me it seems that what you should
really be using here.

> +			reg-names = "phy", "port-ctrl";
> +			#phy-cells = <1>;
> +			#address-cells = <0x1>;
> +			#size-cells = <0x0>;
> +
> +			sata-phy at 0 {
> +				reg = <0>;
> +			};
> +
> +			sata-phy at 1 {
> +				reg = <1>;
> +			};
> +		};
>   	};
>
>   	smpboot {
>

Regards,

Hans