[PATCH v3] arm64: enforce x1|x2|x3 == 0 upon kernel entry as per boot protocol

Ard Biesheuvel ard.biesheuvel at linaro.org
Thu Mar 19 04:00:52 PDT 2015


According to the arm64 boot protocol, registers x1 to x3 should be
zero upon kernel entry, and non-zero values are reserved for future
use. This future use is going to be problematic if we never enforce
the current rules, so start enforcing them now, by emitting a warning
if non-zero values are detected.

Signed-off-by: Ard Biesheuvel <ard.biesheuvel at linaro.org>
---
 arch/arm64/kernel/head.S  | 19 ++++++++++++++++++-
 arch/arm64/kernel/setup.c | 10 ++++++++++
 2 files changed, 28 insertions(+), 1 deletion(-)

diff --git a/arch/arm64/kernel/head.S b/arch/arm64/kernel/head.S
index f5ac337f9598..1fdf42041f42 100644
--- a/arch/arm64/kernel/head.S
+++ b/arch/arm64/kernel/head.S
@@ -233,7 +233,7 @@ section_table:
 #endif
 
 ENTRY(stext)
-	mov	x21, x0				// x21=FDT
+	bl	preserve_boot_args
 	bl	el2_setup			// Drop to EL1, w20=cpu_boot_mode
 	adrp	x24, __PHYS_OFFSET
 	bl	set_cpu_boot_mode_flag
@@ -253,6 +253,23 @@ ENTRY(stext)
 ENDPROC(stext)
 
 /*
+ * Preserve the arguments passed by the bootloader in x0 .. x3
+ */
+preserve_boot_args:
+	mov	x21, x0				// x21=FDT
+
+	adr_l	x0, boot_args			// record the contents of
+	stp	x21, x1, [x0]			// x0 .. x3 at kernel entry
+	stp	x2, x3, [x0, #16]
+
+	dmb	sy				// needed before dc ivac with
+						// MMU off
+
+	add	x1, x0, #0x20			// 4 x 8 bytes
+	b	__inval_cache_range		// tail call
+ENDPROC(preserve_boot_args)
+
+/*
  * Determine validity of the x21 FDT pointer.
  * The dtb must be 8-byte aligned and live in the first 512M of memory.
  */
diff --git a/arch/arm64/kernel/setup.c b/arch/arm64/kernel/setup.c
index 1783b38cf4c0..2f384019b201 100644
--- a/arch/arm64/kernel/setup.c
+++ b/arch/arm64/kernel/setup.c
@@ -115,6 +115,11 @@ void __init early_print(const char *str, ...)
 	printk("%s", buf);
 }
 
+/*
+ * The recorded values of x0 .. x3 upon kernel entry.
+ */
+u64 __cacheline_aligned boot_args[4];
+
 void __init smp_setup_processor_id(void)
 {
 	u64 mpidr = read_cpuid_mpidr() & MPIDR_HWID_BITMASK;
@@ -412,6 +417,11 @@ void __init setup_arch(char **cmdline_p)
 	conswitchp = &dummy_con;
 #endif
 #endif
+	if (boot_args[1] || boot_args[2] || boot_args[3]) {
+		pr_err("WARNING: boot protocol violation detected (x1 == %llx, x2 == %llx, x3 == %llx)\n",
+			boot_args[1], boot_args[2], boot_args[3]);
+		pr_err("WARNING: your bootloader may fail to load newer kernels\n");
+	}
 }
 
 static int __init arm64_device_init(void)
-- 
1.8.3.2




More information about the linux-arm-kernel mailing list