[PATCH v10 08/21] ARM64 / ACPI: Introduce early_param "acpi=" to enable/disable ACPI
Hanjun Guo
guohanjun at huawei.com
Wed Mar 18 19:30:09 PDT 2015
On 2015/3/19 4:07, Ard Biesheuvel wrote:
> On 18 March 2015 at 12:35, Lorenzo Pieralisi <lorenzo.pieralisi at arm.com> wrote:
>> On Wed, Mar 11, 2015 at 12:39:34PM +0000, Hanjun Guo wrote:
>>> From: Al Stone <al.stone at linaro.org>
>>>
>>> This implements the following policy to decide whether ACPI should
>>> be used to boot the system:
>>> - acpi=off: ACPI will not be used to boot the system, even if there is
>>> no alternative available (e.g., device tree is empty)
>>> - acpi=force: only ACPI will be used to boot the system; if that fails,
>>> there will be no fallback to alternative methods (such as device tree)
>> I think this comment is stale. acpi=force enables ACPI and tries to
>> init the ACPI tables without even checking DT, but it does fall back to
>> DT if ACPI table init fails (by disabling ACPI and unflattening the
>> FDT).
>>
>> Am I wrong ?
>>
> No, you're right. But I would suggest that we fix the code, not the comment.
I agree. If user pass "acpi=force", I think it means ACPI only, so if
ACPI fails, we can just not going to boot the system.
>
> I think we are all in agreement on the policy, we only need to make
> disable_acpi() conditional on whether acpi_param_force is set
I prefer Catalin's suggestion, just not to unflatten the device tree,
what do you think?
If it is ok, I will add a fix patch on top of this patch set.
Thanks
Hanjun
>
>
>>> - otherwise, ACPI will be used as a fallback if the device tree turns out
>>> to lack a platform description; the heuristic to decide this is whether
>>> /chosen is the only node present at depth 1
>>>
>>> CC: Catalin Marinas <catalin.marinas at arm.com>
>>> CC: Will Deacon <will.deacon at arm.com>
>>> CC: Rafael J. Wysocki <rjw at rjwysocki.net>
>>> Acked-by: Olof Johansson <olof at lixom.net>
>>> Acked-by: Grant Likely <grant.likely at linaro.org>
>>> Tested-by: Timur Tabi <timur at codeaurora.org>
>>> Signed-off-by: Al Stone <al.stone at linaro.org>
>>> Signed-off-by: Graeme Gregory <graeme.gregory at linaro.org>
>>> Signed-off-by: Hanjun Guo <hanjun.guo at linaro.org>
>>> Signed-off-by: Ard Biesheuvel <ard.biesheuvel at linaro.org>
>>> ---
>>> Documentation/kernel-parameters.txt | 3 ++-
>>> arch/arm64/include/asm/acpi.h | 7 +++++
>>> arch/arm64/kernel/acpi.c | 52 +++++++++++++++++++++++++++++++++----
>>> 3 files changed, 56 insertions(+), 6 deletions(-)
>>>
>>> diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
>>> index bfcb1a6..d6c35a7 100644
>>> --- a/Documentation/kernel-parameters.txt
>>> +++ b/Documentation/kernel-parameters.txt
>>> @@ -165,7 +165,7 @@ multipliers 'Kilo', 'Mega', and 'Giga', equalling 2^10, 2^20, and 2^30
>>> bytes respectively. Such letter suffixes can also be entirely omitted.
>>>
>>>
>>> - acpi= [HW,ACPI,X86]
>>> + acpi= [HW,ACPI,X86,ARM64]
>>> Advanced Configuration and Power Interface
>>> Format: { force | off | strict | noirq | rsdt }
>>> force -- enable ACPI if default was off
>>> @@ -175,6 +175,7 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
>>> strictly ACPI specification compliant.
>>> rsdt -- prefer RSDT over (default) XSDT
>>> copy_dsdt -- copy DSDT to memory
>>> + For ARM64, ONLY "acpi=off" or "acpi=force" are available
>>>
>>> See also Documentation/power/runtime_pm.txt, pci=noacpi
>>>
>>> diff --git a/arch/arm64/include/asm/acpi.h b/arch/arm64/include/asm/acpi.h
>>> index 40e0924..c5a9b97 100644
>>> --- a/arch/arm64/include/asm/acpi.h
>>> +++ b/arch/arm64/include/asm/acpi.h
>>> @@ -39,6 +39,13 @@ static inline void disable_acpi(void)
>>> acpi_noirq = 1;
>>> }
>>>
>>> +static inline void enable_acpi(void)
>>> +{
>>> + acpi_disabled = 0;
>>> + acpi_pci_disabled = 0;
>>> + acpi_noirq = 0;
>>> +}
>>> +
>>> /*
>>> * It's used from ACPI core in kdump to boot UP system with SMP kernel,
>>> * with this check the ACPI core will not override the CPU index
>>> diff --git a/arch/arm64/kernel/acpi.c b/arch/arm64/kernel/acpi.c
>>> index 7abac24..2269e30 100644
>>> --- a/arch/arm64/kernel/acpi.c
>>> +++ b/arch/arm64/kernel/acpi.c
>>> @@ -22,15 +22,49 @@
>>> #include <linux/irq.h>
>>> #include <linux/irqdomain.h>
>>> #include <linux/memblock.h>
>>> +#include <linux/of_fdt.h>
>>> #include <linux/smp.h>
>>>
>>> -int acpi_noirq; /* skip ACPI IRQ initialization */
>>> -int acpi_disabled;
>>> +int acpi_noirq = 1; /* skip ACPI IRQ initialization */
>>> +int acpi_disabled = 1;
>>> EXPORT_SYMBOL(acpi_disabled);
>>>
>>> -int acpi_pci_disabled; /* skip ACPI PCI scan and IRQ initialization */
>>> +int acpi_pci_disabled = 1; /* skip ACPI PCI scan and IRQ initialization */
>>> EXPORT_SYMBOL(acpi_pci_disabled);
>>>
>>> +static bool param_acpi_off __initdata;
>>> +static bool param_acpi_force __initdata;
>>> +
>>> +static int __init parse_acpi(char *arg)
>>> +{
>>> + if (!arg)
>>> + return -EINVAL;
>>> +
>>> + /* "acpi=off" disables both ACPI table parsing and interpreter */
>>> + if (strcmp(arg, "off") == 0)
>>> + param_acpi_off = true;
>>> + else if (strcmp(arg, "force") == 0) /* force ACPI to be enabled */
>>> + param_acpi_force = true;
>>> + else
>>> + return -EINVAL; /* Core will print when we return error */
>>> +
>>> + return 0;
>>> +}
>>> +early_param("acpi", parse_acpi);
>>> +
>>> +static int __init dt_scan_depth1_nodes(unsigned long node,
>>> + const char *uname, int depth,
>>> + void *data)
>>> +{
>>> + /*
>>> + * Return 1 as soon as we encounter a node at depth 1 that is
>>> + * not the /chosen node.
>>> + */
>>> + if (depth == 1 && (strcmp(uname, "chosen") != 0))
>>> + return 1;
>>> + return 0;
>>> +}
>>> +
>>> /*
>>> * __acpi_map_table() will be called before page_init(), so early_ioremap()
>>> * or early_memremap() should be called here to for ACPI table mapping.
>>> @@ -83,10 +117,18 @@ static int __init acpi_parse_fadt(struct acpi_table_header *table)
>>> */
>>> void __init acpi_boot_table_init(void)
>>> {
>>> - /* If acpi_disabled, bail out */
>>> - if (acpi_disabled)
>>> + /*
>>> + * Enable ACPI instead of device tree unless
>>> + * - ACPI has been disabled explicitly (acpi=off), or
>>> + * - the device tree is not empty (it has more than just a /chosen node)
>>> + * and ACPI has not been force enabled (acpi=force)
>>> + */
>>> + if (param_acpi_off ||
>>> + (!param_acpi_force && of_scan_flat_dt(dt_scan_depth1_nodes, NULL)))
>>> return;
>>>
>>> + enable_acpi();
>>> +
>>> /* Initialize the ACPI boot-time table parser. */
>>> if (acpi_table_init()) {
>>> disable_acpi();
>>> --
>>> 1.9.1
>>>
>>>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-acpi" in
> the body of a message to majordomo at vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
>
> .
>
More information about the linux-arm-kernel
mailing list