[PATCH 10/12] Doc: usb: ci-hdrc-imx: add tx(rx)-burst-config-dword for binding doc

[Peter Chen]

It is used to override the default setting for burst size, changing
burst size takes effect only when the SBUSCFG.AHBBRST = 0.

Signed-off-by: Peter Chen <peter.chen at freescale.com>
---
 Documentation/devicetree/bindings/usb/ci-hdrc-imx.txt | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/Documentation/devicetree/bindings/usb/ci-hdrc-imx.txt b/Documentation/devicetree/bindings/usb/ci-hdrc-imx.txt
index a548502..892bac8 100644
--- a/Documentation/devicetree/bindings/usb/ci-hdrc-imx.txt
+++ b/Documentation/devicetree/bindings/usb/ci-hdrc-imx.txt
@@ -24,6 +24,10 @@ Optional properties:
   should be aligned with ITC bits at register USBCMD.
 - ahb-burst-config: it is vendor dependent, the required value should be
   aligned with AHBBRST at SBUSCFG, the range is from 0x0 to 0x7.
+- tx-burst-size-dword: it is vendor dependent, the tx burst size in dword
+  (4 bytes)
+- rx-burst-size-dword: it is vendor dependent, the rx burst size in dword
+  (4 bytes)
 
 Examples:
 usb at 02184000 { /* USB OTG */
@@ -38,4 +42,6 @@ usb at 02184000 { /* USB OTG */
 	tpl-support;
 	gadget-itc-setting = <0x4>; /* 4 micro-frames */
 	ahb-burst-config = <0x0>; /* Incremental burst of unspecified length */
+	tx-burst-size-dword = <0x10>;
+	rx-burst-size-dword = <0x10>;
 };
-- 
1.9.1