[PATCH v5 2/2] ARM: dts: sun9i: optimus: Switch to phy core regulator bindings for usb phys

[Kishon Vijay Abraham I]

On Saturday 14 March 2015 09:27 AM, Chen-Yu Tsai wrote:
> Since the phy core already supports specifying a regulator to handle
> during power up/down, it was decided to drop the regulator support
> in the sun9i usb phy driver.
>
> This patch switches the DT to the core bindings. This and the phy driver
> would be in the same release and should not be a problem as far as DT
> stability goes.
>
> Signed-off-by: Chen-Yu Tsai <wens at csie.org>

looks good..

Acked-by: Kishon Vijay Abraham I <kishon at ti.com>

> ---
>   arch/arm/boot/dts/sun9i-a80-optimus.dts | 4 ++--
>   1 file changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/arch/arm/boot/dts/sun9i-a80-optimus.dts b/arch/arm/boot/dts/sun9i-a80-optimus.dts
> index e53f2656c2d0..c6ca116c59d2 100644
> --- a/arch/arm/boot/dts/sun9i-a80-optimus.dts
> +++ b/arch/arm/boot/dts/sun9i-a80-optimus.dts
> @@ -203,7 +203,7 @@
>   };
>
>   &usbphy1 {
> -	vbus-supply = <&reg_usb1_vbus>;
> +	phy-supply = <&reg_usb1_vbus>;
>   	status = "okay";
>   };
>
> @@ -212,6 +212,6 @@
>   };
>
>   &usbphy3 {
> -	vbus-supply = <&reg_usb3_vbus>;
> +	phy-supply = <&reg_usb3_vbus>;
>   	status = "okay";
>   };
>