[PATCHv4 08/35] clk: ti: fix ti_clk_get_reg_addr error handling
Tero Kristo
t-kristo at ti.com
Wed Mar 18 07:43:53 PDT 2015
There is a case where NULL can be a valid return value for
ti_clk_get_reg_addr, specifically the case where both the provider index
and register offsets are zero. In this case, the current error checking
against a NULL pointer will fail. Thus, change the API to return a
ERR_PTR value in an error case, and change all the users of this API to
check against IS_ERR instead.
Signed-off-by: Tero Kristo <t-kristo at ti.com>
Cc: Michael Turquette <mturquette at linaro.org>
---
drivers/clk/ti/apll.c | 5 +++--
drivers/clk/ti/autoidle.c | 2 +-
drivers/clk/ti/clk.c | 7 ++++---
drivers/clk/ti/divider.c | 4 ++--
drivers/clk/ti/dpll.c | 6 +++---
drivers/clk/ti/gate.c | 4 ++--
drivers/clk/ti/interface.c | 2 +-
drivers/clk/ti/mux.c | 4 ++--
8 files changed, 18 insertions(+), 16 deletions(-)
diff --git a/drivers/clk/ti/apll.c b/drivers/clk/ti/apll.c
index 72d9727..49baf38 100644
--- a/drivers/clk/ti/apll.c
+++ b/drivers/clk/ti/apll.c
@@ -203,7 +203,7 @@ static void __init of_dra7_apll_setup(struct device_node *node)
ad->control_reg = ti_clk_get_reg_addr(node, 0);
ad->idlest_reg = ti_clk_get_reg_addr(node, 1);
- if (!ad->control_reg || !ad->idlest_reg)
+ if (IS_ERR(ad->control_reg) || IS_ERR(ad->idlest_reg))
goto cleanup;
ad->idlest_mask = 0x1;
@@ -384,7 +384,8 @@ static void __init of_omap2_apll_setup(struct device_node *node)
ad->autoidle_reg = ti_clk_get_reg_addr(node, 1);
ad->idlest_reg = ti_clk_get_reg_addr(node, 2);
- if (!ad->control_reg || !ad->autoidle_reg || !ad->idlest_reg)
+ if (IS_ERR(ad->control_reg) || IS_ERR(ad->autoidle_reg) ||
+ IS_ERR(ad->idlest_reg))
goto cleanup;
clk = clk_register(NULL, &clk_hw->hw);
diff --git a/drivers/clk/ti/autoidle.c b/drivers/clk/ti/autoidle.c
index 8912ff8..e75c64c 100644
--- a/drivers/clk/ti/autoidle.c
+++ b/drivers/clk/ti/autoidle.c
@@ -119,7 +119,7 @@ int __init of_ti_clk_autoidle_setup(struct device_node *node)
clk->name = node->name;
clk->reg = ti_clk_get_reg_addr(node, 0);
- if (!clk->reg) {
+ if (IS_ERR(clk->reg)) {
kfree(clk);
return -EINVAL;
}
diff --git a/drivers/clk/ti/clk.c b/drivers/clk/ti/clk.c
index e22b956..0ebe5c5 100644
--- a/drivers/clk/ti/clk.c
+++ b/drivers/clk/ti/clk.c
@@ -103,7 +103,8 @@ int __init ti_clk_retry_init(struct device_node *node, struct clk_hw *hw,
* @index: register index from the clock node
*
* Builds clock register address from device tree information. This
- * is a struct of type clk_omap_reg.
+ * is a struct of type clk_omap_reg. Returns a pointer to the register
+ * address, or a pointer error value in failure.
*/
void __iomem *ti_clk_get_reg_addr(struct device_node *node, int index)
{
@@ -121,14 +122,14 @@ void __iomem *ti_clk_get_reg_addr(struct device_node *node, int index)
if (i == CLK_MAX_MEMMAPS) {
pr_err("clk-provider not found for %s!\n", node->name);
- return NULL;
+ return ERR_PTR(-ENOENT);
}
reg->index = i;
if (of_property_read_u32_index(node, "reg", index, &val)) {
pr_err("%s must have reg[%d]!\n", node->name, index);
- return NULL;
+ return ERR_PTR(-EINVAL);
}
reg->offset = val;
diff --git a/drivers/clk/ti/divider.c b/drivers/clk/ti/divider.c
index 6211893..ff5f117 100644
--- a/drivers/clk/ti/divider.c
+++ b/drivers/clk/ti/divider.c
@@ -530,8 +530,8 @@ static int __init ti_clk_divider_populate(struct device_node *node,
u32 val;
*reg = ti_clk_get_reg_addr(node, 0);
- if (!*reg)
- return -EINVAL;
+ if (IS_ERR(*reg))
+ return PTR_ERR(*reg);
if (!of_property_read_u32(node, "ti,bit-shift", &val))
*shift = val;
diff --git a/drivers/clk/ti/dpll.c b/drivers/clk/ti/dpll.c
index 81dc469..11478a5 100644
--- a/drivers/clk/ti/dpll.c
+++ b/drivers/clk/ti/dpll.c
@@ -390,18 +390,18 @@ static void __init of_ti_dpll_setup(struct device_node *node,
#endif
} else {
dd->idlest_reg = ti_clk_get_reg_addr(node, 1);
- if (!dd->idlest_reg)
+ if (IS_ERR(dd->idlest_reg))
goto cleanup;
dd->mult_div1_reg = ti_clk_get_reg_addr(node, 2);
}
- if (!dd->control_reg || !dd->mult_div1_reg)
+ if (IS_ERR(dd->control_reg) || IS_ERR(dd->mult_div1_reg))
goto cleanup;
if (dd->autoidle_mask) {
dd->autoidle_reg = ti_clk_get_reg_addr(node, 3);
- if (!dd->autoidle_reg)
+ if (IS_ERR(dd->autoidle_reg))
goto cleanup;
}
diff --git a/drivers/clk/ti/gate.c b/drivers/clk/ti/gate.c
index d493307..0c6fdfc 100644
--- a/drivers/clk/ti/gate.c
+++ b/drivers/clk/ti/gate.c
@@ -225,7 +225,7 @@ static void __init _of_ti_gate_clk_setup(struct device_node *node,
if (ops != &omap_gate_clkdm_clk_ops) {
reg = ti_clk_get_reg_addr(node, 0);
- if (!reg)
+ if (IS_ERR(reg))
return;
if (!of_property_read_u32(node, "ti,bit-shift", &val))
@@ -264,7 +264,7 @@ _of_ti_composite_gate_clk_setup(struct device_node *node,
return;
gate->enable_reg = ti_clk_get_reg_addr(node, 0);
- if (!gate->enable_reg)
+ if (IS_ERR(gate->enable_reg))
goto cleanup;
of_property_read_u32(node, "ti,bit-shift", &val);
diff --git a/drivers/clk/ti/interface.c b/drivers/clk/ti/interface.c
index 265d91f..c76230d 100644
--- a/drivers/clk/ti/interface.c
+++ b/drivers/clk/ti/interface.c
@@ -111,7 +111,7 @@ static void __init _of_ti_interface_clk_setup(struct device_node *node,
u32 val;
reg = ti_clk_get_reg_addr(node, 0);
- if (!reg)
+ if (IS_ERR(reg))
return;
if (!of_property_read_u32(node, "ti,bit-shift", &val))
diff --git a/drivers/clk/ti/mux.c b/drivers/clk/ti/mux.c
index 728e253..5cdeed5 100644
--- a/drivers/clk/ti/mux.c
+++ b/drivers/clk/ti/mux.c
@@ -210,7 +210,7 @@ static void of_mux_clk_setup(struct device_node *node)
reg = ti_clk_get_reg_addr(node, 0);
- if (!reg)
+ if (IS_ERR(reg))
goto cleanup;
of_property_read_u32(node, "ti,bit-shift", &shift);
@@ -283,7 +283,7 @@ static void __init of_ti_composite_mux_clk_setup(struct device_node *node)
mux->reg = ti_clk_get_reg_addr(node, 0);
- if (!mux->reg)
+ if (IS_ERR(mux->reg))
goto cleanup;
if (!of_property_read_u32(node, "ti,bit-shift", &val))
--
1.7.9.5
More information about the linux-arm-kernel
mailing list