[PATCH v16 09/11] ARM: dts: qcom: Add idle states device nodes for 8084

[Lina Iyer]

Add ARM common idle states device bindings for cpuidle support for APQ
8084.

Support Standalone power collapse (SPC) idle state (power down that does not
affect any SoC idle states) for each cpu.

Cc: Kumar Gala <galak at codeaurora.org>
Signed-off-by: Lina Iyer <lina.iyer at linaro.org>
---
 arch/arm/boot/dts/qcom-apq8084.dtsi | 14 ++++++++++++++
 1 file changed, 14 insertions(+)

diff --git a/arch/arm/boot/dts/qcom-apq8084.dtsi b/arch/arm/boot/dts/qcom-apq8084.dtsi
index 71182bf..6126d47 100644
--- a/arch/arm/boot/dts/qcom-apq8084.dtsi
+++ b/arch/arm/boot/dts/qcom-apq8084.dtsi
@@ -22,6 +22,7 @@
 			next-level-cache = <&L2>;
 			qcom,acc = <&acc0>;
 			qcom,saw = <&saw0>;
+			cpu-idle-states = <&CPU_SPC>;
 		};
 
 		cpu at 1 {
@@ -32,6 +33,7 @@
 			next-level-cache = <&L2>;
 			qcom,acc = <&acc1>;
 			qcom,saw = <&saw1>;
+			cpu-idle-states = <&CPU_SPC>;
 		};
 
 		cpu at 2 {
@@ -42,6 +44,7 @@
 			next-level-cache = <&L2>;
 			qcom,acc = <&acc2>;
 			qcom,saw = <&saw2>;
+			cpu-idle-states = <&CPU_SPC>;
 		};
 
 		cpu at 3 {
@@ -52,6 +55,7 @@
 			next-level-cache = <&L2>;
 			qcom,acc = <&acc3>;
 			qcom,saw = <&saw3>;
+			cpu-idle-states = <&CPU_SPC>;
 		};
 
 		L2: l2-cache {
@@ -59,6 +63,16 @@
 			cache-level = <2>;
 			qcom,saw = <&saw_l2>;
 		};
+
+		idle-states {
+			CPU_SPC: spc {
+				compatible = "qcom,idle-state-spc",
+						"arm,idle-state";
+				entry-latency-us = <150>;
+				exit-latency-us = <200>;
+				min-residency-us = <2000>;
+			};
+		};
 	};
 
 	cpu-pmu {
-- 
2.1.0