[PATCH v3 05/15] dt-bindings: Document the STM32 reset bindings

[Maxime Coquelin]

Hi Chanwoo,

2015-03-13 1:09 GMT+01:00 Chanwoo Choi <cw00.choi at samsung.com>:
> Hi Maxime,
>
> On 03/13/2015 06:55 AM, Maxime Coquelin wrote:
>> From: Maxime Coquelin <mcoquelin.stm32 at gmail.com>
>>
>> This adds documentation of device tree bindings for the
>> STM32 reset controller.
>>
>> Signed-off-by: Maxime Coquelin <mcoquelin.stm32 at gmail.com>
>> ---
>>  .../devicetree/bindings/reset/st,stm32-rcc.txt     | 102 +++++++++++++++++++++
>>  1 file changed, 102 insertions(+)
>>  create mode 100644 Documentation/devicetree/bindings/reset/st,stm32-rcc.txt
>>
>> diff --git a/Documentation/devicetree/bindings/reset/st,stm32-rcc.txt b/Documentation/devicetree/bindings/reset/st,stm32-rcc.txt
>> new file mode 100644
>> index 0000000..962f961
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/reset/st,stm32-rcc.txt
<snip>

>> + - can1: 281
>> + - can2: 282
>> + - pwr: 284
>> + - dac: 285
>> + - uart7: 286
>> + - uart8: 287
>> + - tim1: 288
>> + - tim8: 289
>> + - usart1: 292
>> + - usart6: 293
>> + - adc: 296
>> + - sdio: 299
>> + - spi1: 300
>> + - spi4: 301
>> + - syscfg: 302
>> + - tim9: 304
>> + - tim10: 305
>> + - tim11: 306
>> + - spi5: 308
>> + - spi6: 309
>> + - sai1: 310
>> + - ltdc: 31
>> +
>>
>
> Last line is un-necessary. When I applied this patch for test
> "new blank line at EOF" happen.

Thanks, that will be fixed in v4.

Kind regards,
Maxime
>
> +++ b/Documentation/devicetree/bindings/reset/st,stm32-rcc.txt
> @@ -99,4 +99,3 @@ List of indexes for STM32F429:
>   - spi6: 309
>   - sai1: 310
>   - ltdc: 31
> -
>
> Thanks,
> Chanwoo Choi
>