[PATCH 05/10] dt-bindings: add Marvell PMU documentation

[Russell King]

Add the required DT binding documentation for the Marvell PMU driver.

Signed-off-by: Russell King <rmk+kernel at arm.linux.org.uk>
---
 Documentation/devicetree/bindings/soc/dove/pmu.txt | 49 ++++++++++++++++++++++
 1 file changed, 49 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/soc/dove/pmu.txt

diff --git a/Documentation/devicetree/bindings/soc/dove/pmu.txt b/Documentation/devicetree/bindings/soc/dove/pmu.txt
new file mode 100644
index 000000000000..25d988e7ec35
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/dove/pmu.txt
@@ -0,0 +1,49 @@
+Device Tree bindings for Marvell PMU
+
+Required properties:
+ - compatible: value should be "marvell,dove-pmu".
+ - reg: two base addresses and sizes of the PM controller and PMU.
+ - interrupts: single interrupt number for the PMU interrupt
+ - interrupt-controller: must be specified as the PMU itself is an
+    interrupt controller.
+ - #interrupt-cells: must be 1.
+ - #reset-cells: must be 1.
+
+Optional properties:
+ - None
+
+Power domain descriptions are listed as child nodes of the power management
+node.  Each domain has the following properties:
+
+Required properties:
+ - #power-domain-cells: must be 0.
+
+Optional properties:
+ - marvell,pmu_pwr_mask: specifies the mask value for PMU power register
+ - marvell,pmu_iso_mask: specifies the mask value for PMU isolation register
+ - resets: points to the reset manager (PMU node) and reset index.
+
+Example:
+
+	pmu: power-management at d0000 {
+		compatible = "marvell,dove-pmu";
+		reg = <0xd0000 0x8000>, <0xd8000 0x8000>;
+		interrupts = <33>;
+		interrupt-controller;
+		#interrupt-cells = <1>;
+		#reset-cells = <1>;
+
+		vpu_domain: vpu-domain {
+			#power-domain-cells = <0>;
+			marvell,pmu_pwr_mask = <0x00000008>;
+			marvell,pmu_iso_mask = <0x00000001>;
+			resets = <&pmu 16>;
+		};
+
+		gpu_domain: gpu-domain {
+			#power-domain-cells = <0>;
+			marvell,pmu_pwr_mask = <0x00000004>;
+			marvell,pmu_iso_mask = <0x00000002>;
+			resets = <&pmu 18>;
+		};
+	};
-- 
1.8.3.1