[PATCH v3 3/6] ARM: mx25: Remove static memory mapping
Shawn Guo
shawn.guo at linaro.org
Fri Mar 13 07:15:49 PDT 2015
On Fri, Mar 13, 2015 at 10:31:55AM -0300, Fabio Estevam wrote:
> From: Fabio Estevam <fabio.estevam at freescale.com>
>
> We use dynamic memory mapping when using dt, so remove all the static mappings.
>
> Signed-off-by: Fabio Estevam <fabio.estevam at freescale.com>
> ---
> Changes since v2:
> - Remove the static mappings in one single patch
>
> arch/arm/mach-imx/Makefile | 2 +-
> arch/arm/mach-imx/common.h | 4 --
> arch/arm/mach-imx/mach-imx25.c | 20 +++++++++-
> arch/arm/mach-imx/mm-imx25.c | 89 ------------------------------------------
> 4 files changed, 19 insertions(+), 96 deletions(-)
> delete mode 100644 arch/arm/mach-imx/mm-imx25.c
>
> diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile
> index 86c6470..3244cf1 100644
> --- a/arch/arm/mach-imx/Makefile
> +++ b/arch/arm/mach-imx/Makefile
> @@ -3,7 +3,7 @@ obj-y := time.o cpu.o system.o irq-common.o
> obj-$(CONFIG_SOC_IMX1) += clk-imx1.o mm-imx1.o
> obj-$(CONFIG_SOC_IMX21) += clk-imx21.o mm-imx21.o
>
> -obj-$(CONFIG_SOC_IMX25) += clk-imx25.o mm-imx25.o cpu-imx25.o mach-imx25.o
> +obj-$(CONFIG_SOC_IMX25) += clk-imx25.o cpu-imx25.o mach-imx25.o
>
> obj-$(CONFIG_SOC_IMX27) += cpu-imx27.o pm-imx27.o
> obj-$(CONFIG_SOC_IMX27) += clk-imx27.o mm-imx27.o ehci-imx27.o
> diff --git a/arch/arm/mach-imx/common.h b/arch/arm/mach-imx/common.h
> index a12b52d..771ecfe 100644
> --- a/arch/arm/mach-imx/common.h
> +++ b/arch/arm/mach-imx/common.h
> @@ -23,13 +23,11 @@ struct of_device_id;
>
> void mx1_map_io(void);
> void mx21_map_io(void);
> -void mx25_map_io(void);
> void mx27_map_io(void);
> void mx31_map_io(void);
> void mx35_map_io(void);
> void imx1_init_early(void);
> void imx21_init_early(void);
> -void imx25_init_early(void);
> void imx27_init_early(void);
> void imx31_init_early(void);
> void imx35_init_early(void);
> @@ -37,13 +35,11 @@ void mxc_init_irq(void __iomem *);
> void tzic_init_irq(void);
> void mx1_init_irq(void);
> void mx21_init_irq(void);
> -void mx25_init_irq(void);
> void mx27_init_irq(void);
> void mx31_init_irq(void);
> void mx35_init_irq(void);
> void imx1_soc_init(void);
> void imx21_soc_init(void);
> -void imx25_soc_init(void);
> void imx27_soc_init(void);
> void imx31_soc_init(void);
> void imx35_soc_init(void);
> diff --git a/arch/arm/mach-imx/mach-imx25.c b/arch/arm/mach-imx/mach-imx25.c
> index 25defbd..91b36ec 100644
> --- a/arch/arm/mach-imx/mach-imx25.c
> +++ b/arch/arm/mach-imx/mach-imx25.c
> @@ -10,12 +10,29 @@
> */
>
> #include <linux/irq.h>
> +#include <linux/of_address.h>
> #include <linux/of_irq.h>
> #include <linux/of_platform.h>
> #include <asm/mach/arch.h>
> #include <asm/mach/time.h>
> #include "common.h"
> -#include "mx25.h"
> +#include "hardware.h"
> +
> +void static __init imx25_init_early(void)
> +{
> + mxc_set_cpu_type(MXC_CPU_MX25);
> +}
> +
> +void static __init mx25_init_irq(void)
I was expecting that you fix these two of 'void static' too in v2. Sigh.
I fixed them up and applied the series.
Shawn
> +{
> + struct device_node *np;
> + void __iomem *avic_base;
> +
> + np = of_find_compatible_node(NULL, NULL, "fsl,avic");
> + avic_base = of_iomap(np, 0);
> + BUG_ON(!avic_base);
> + mxc_init_irq(avic_base);
> +}
>
> static const char * const imx25_dt_board_compat[] __initconst = {
> "fsl,imx25",
> @@ -23,7 +40,6 @@ static const char * const imx25_dt_board_compat[] __initconst = {
> };
>
> DT_MACHINE_START(IMX25_DT, "Freescale i.MX25 (Device Tree Support)")
> - .map_io = mx25_map_io,
> .init_early = imx25_init_early,
> .init_irq = mx25_init_irq,
> .dt_compat = imx25_dt_board_compat,
> diff --git a/arch/arm/mach-imx/mm-imx25.c b/arch/arm/mach-imx/mm-imx25.c
> deleted file mode 100644
> index 5211f62..0000000
> --- a/arch/arm/mach-imx/mm-imx25.c
> +++ /dev/null
> @@ -1,89 +0,0 @@
> -/*
> - * Copyright (C) 1999,2000 Arm Limited
> - * Copyright (C) 2000 Deep Blue Solutions Ltd
> - * Copyright (C) 2002 Shane Nay (shane at minirl.com)
> - * Copyright 2005-2007 Freescale Semiconductor, Inc. All Rights Reserved.
> - * - add MX31 specific definitions
> - *
> - * This program is free software; you can redistribute it and/or modify
> - * it under the terms of the GNU General Public License as published by
> - * the Free Software Foundation; either version 2 of the License, or
> - * (at your option) any later version.
> - *
> - * This program is distributed in the hope that it will be useful,
> - * but WITHOUT ANY WARRANTY; without even the implied warranty of
> - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> - * GNU General Public License for more details.
> - */
> -
> -#include <linux/mm.h>
> -#include <linux/init.h>
> -#include <linux/err.h>
> -#include <linux/pinctrl/machine.h>
> -
> -#include <asm/pgtable.h>
> -#include <asm/mach/map.h>
> -
> -#include "common.h"
> -#include "devices/devices-common.h"
> -#include "hardware.h"
> -#include "iomux-v3.h"
> -#include "mx25.h"
> -
> -/*
> - * This table defines static virtual address mappings for I/O regions.
> - * These are the mappings common across all MX25 boards.
> - */
> -static struct map_desc mx25_io_desc[] __initdata = {
> - imx_map_entry(MX25, AVIC, MT_DEVICE_NONSHARED),
> - imx_map_entry(MX25, AIPS1, MT_DEVICE_NONSHARED),
> - imx_map_entry(MX25, AIPS2, MT_DEVICE_NONSHARED),
> -};
> -
> -/*
> - * This function initializes the memory map. It is called during the
> - * system startup to create static physical to virtual memory mappings
> - * for the IO modules.
> - */
> -void __init mx25_map_io(void)
> -{
> - iotable_init(mx25_io_desc, ARRAY_SIZE(mx25_io_desc));
> -}
> -
> -void __init imx25_init_early(void)
> -{
> - mxc_set_cpu_type(MXC_CPU_MX25);
> - mxc_iomux_v3_init(MX25_IO_ADDRESS(MX25_IOMUXC_BASE_ADDR));
> -}
> -
> -void __init mx25_init_irq(void)
> -{
> - mxc_init_irq(MX25_IO_ADDRESS(MX25_AVIC_BASE_ADDR));
> -}
> -
> -static struct sdma_platform_data imx25_sdma_pdata __initdata = {
> - .fw_name = "sdma-imx25.bin",
> -};
> -
> -static const struct resource imx25_audmux_res[] __initconst = {
> - DEFINE_RES_MEM(MX25_AUDMUX_BASE_ADDR, SZ_16K),
> -};
> -
> -void __init imx25_soc_init(void)
> -{
> - mxc_arch_reset_init(MX25_IO_ADDRESS(MX25_WDOG_BASE_ADDR));
> - mxc_device_init();
> -
> - /* i.mx25 has the i.mx35 type gpio */
> - mxc_register_gpio("imx35-gpio", 0, MX25_GPIO1_BASE_ADDR, SZ_16K, MX25_INT_GPIO1, 0);
> - mxc_register_gpio("imx35-gpio", 1, MX25_GPIO2_BASE_ADDR, SZ_16K, MX25_INT_GPIO2, 0);
> - mxc_register_gpio("imx35-gpio", 2, MX25_GPIO3_BASE_ADDR, SZ_16K, MX25_INT_GPIO3, 0);
> - mxc_register_gpio("imx35-gpio", 3, MX25_GPIO4_BASE_ADDR, SZ_16K, MX25_INT_GPIO4, 0);
> -
> - pinctrl_provide_dummies();
> - /* i.mx25 has the i.mx35 type sdma */
> - imx_add_imx_sdma("imx35-sdma", MX25_SDMA_BASE_ADDR, MX25_INT_SDMA, &imx25_sdma_pdata);
> - /* i.mx25 has the i.mx31 type audmux */
> - platform_device_register_simple("imx31-audmux", 0, imx25_audmux_res,
> - ARRAY_SIZE(imx25_audmux_res));
> -}
> --
> 1.9.1
>
More information about the linux-arm-kernel
mailing list